diff --git a/INSTALL.md b/INSTALL.md deleted file mode 100644 index 899f969..0000000 --- a/INSTALL.md +++ /dev/null @@ -1,27 +0,0 @@ -* Le indicazioni che seguono riguardano un'installazione "da zero". Se vuoi provare mastostart senza tanto sbattimento [vedi qui](https://git.lattuga.net/pongrebio/MastodonStartpage/src/master/docker/). - -* Requisiti: apache con mod_rewrite abilitato; php (cli e "per apache") con estensioni mysqli, mbstring, pcntl, intl, json, session; mariadb (dovrebbe funzionare anche con mysql, ma non l'ho testato). - -* Clona il repository con `git clone https://git.lattuga.net/pongrebio/MastodonStartpage.git` (poi potrai mantenerlo aggiornato con `git pull` dalla directory «MastodonStartpage»). - -* Apache deve essere configurato (con "AllowOverride All") per servire il contenuto della directory «web/». - -* Php dovrebbe essere configurato con un limite di memoria usabile abbastanza alto: 1 gb («memory_limit=1G») dovrebbe andar bene, ma di più (2 gb?) sarebbe anche meglio, per andare sul sicuro con un occhio al futuro (uro-uro). Tanta memoria serve per «mustard/crawler/peerscrawl.php», il crawler che recupera ricorsivamente un bel po' di istanze, al momento circa 21.000 arrivando a usare un picco di circa 750 mb (in circa 6 ore, sulla mia sgrausissima adsl). (Delle istanze recuperate da «peerscrawl.php» solo circa 2.800 finiscono poi effettivamente nel database: per tantissime l'endpoint \[dominio\]/api/v1/instance poi non risponde, o perché l'istanza è morta, oppure perché è giù, o perché non si tratta di istanza mastodon, o perché l'endpoint è disabilitato). - -* Se vuoi provare la funzione di invio delle mail di invito alle admin delle istanze, php deve essere configurato in modo che sia in grado di inviare mail che avranno come «From:» l'indirizzo email "mittente" definibile impostando la variabile «ref_email» in «mustard/sec/mustard.ini». In questo stesso file di configurazione puoi cambiare il valore della variabile «mail_test_to» a un tuo indirizzo email valido, così da ricevere tu gli inviti; NON impostarla a stringa vuota o a false, in modo da NON inviare inviti reali alle admin delle istanze ora che non c'è ancora niente online. - -* Per quanto riguarda Mustard... - - * se vuoi partire con un database senza istanze e senza account admin predefiniti importa in mariadb o mysql il dump sql che puoi estrarre da «mustard/zzz-materiali/mastostart_non_popolato.sql.gz»; se invece vuoi partire con un database prepopolato di istanze e con due account admin predefiniti, importa in mariadb o mysql il dump sql che puoi estrarre da «mustard/zzz-materiali/mastostart_popolato.sql.gz»; - - * in mariadb o mysql crea un utente con tutti i diritti sul database «mastostart»; - - * copia il file di configurazione di esempio «mustard/sec/mustard.ini.sample» in «mustard/sec/mustard.ini»; - - * edita «mustard/sec/mustard.ini» seguendo le istruzioni che trovi nei commenti che contiene; - - * se il dump che hai importato è quello non popolato, crea almeno un “superadmin” per poter entrare in Mustard lanciando «php addsuperadmin.php» dalla directory «mustard/tools/»; altrimenti, se hai importato invece il dump prepopolato, puoi già entrarci "da admin di Mustard" con email «pongrebio@insicuri.net» e password «password», oppure "da admin di un'istanza invitata" (per finta, per ora) con email «mastodon@bida.im» e password «password». - -* Per quanto riguarda il crawler che crea/aggiorna i dati relativi alle istanze nel database, si tratta di farne girare i due componenti uno dopo l'altro, la prima volta magari da shell, poi con un cron job (quotidiano? settimanale?). Per farlo è sufficiente lanciare lo script «crawl.sh» che si trova nella directory «mustard/crawler». - -* Se il contenuto della directory «web/» sta nella DocumentRoot di apache o di un virtualhost definito in apache bona lè; però è anche possibile installare mastostart in una sottodirectory della DocumentRoot (per esempio «\[DocumentRoot\]/mastostart»), ma in questo caso, perché la parte della guida (la Mastodon Startpage) funzioni, devi impostare al percorso della sottodirectory la variabile «instpath» in «mastostart.ini» (per esempio «instpath="/mastostart"») e la direttiva «RewriteBase» in «.htaccess» (per esempio «RewriteBase "/mastostart"). diff --git a/docker/per_hosting/Dockerfile b/docker/per_hosting/Dockerfile deleted file mode 100644 index 57a4912..0000000 --- a/docker/per_hosting/Dockerfile +++ /dev/null @@ -1,19 +0,0 @@ -FROM alpine:3 -RUN apk add --no-cache apache2 php7 php7-apache2 php7-mysqli php7-mbstring php7-pcntl php7-intl php7-json php7-session mariadb mariadb-client git rsync msmtp openssh sudo -COPY files/sudo.conf /etc/ -COPY files/sudoers /etc/ -COPY files/my.cnf /etc/ -COPY files/httpd.conf /etc/apache2/ -COPY files/vhost.conf /etc/apache2/conf.d/ -COPY files/mastodon.help.conf /etc/apache2/conf.d/ -COPY files/sshd_config /etc/ssh/ -COPY files/php.ini /etc/php7/ -COPY files/msmtprc /etc/php7/ -COPY files/binit.sh /usr/local/bin/ -COPY files/update.sh /root/ -COPY files/mastostart_non_popolato.sql.gz /root/ -COPY files/create_user.sql /root/ -COPY files/authorized_keys /root/ -COPY files/install.sh /root/ -RUN /root/install.sh -CMD /usr/local/bin/binit.sh diff --git a/docker/per_hosting/README.md b/docker/per_hosting/README.md deleted file mode 100644 index 5e57d1d..0000000 --- a/docker/per_hosting/README.md +++ /dev/null @@ -1,23 +0,0 @@ -Questa cartella contiene il Dockerfile e quel che serve per generare un'immagine docker di mastostart pensata per l'hosting su bida. L'immagine pesa circa 450 mb, è basata su alpine linux e contiene apache, php, mariadb, openssh già configurati. Apache è configurato con un virtual host per mastodon.help. - -### Come generare l'immagine docker - -`git clone https://git.lattuga.net/pongrebio/MastodonStartpage.git` per clonare questo repo in locale. - -Dalla directory `docker/per_hosting` del repo clonato: `docker build -t mastostart[:versione] .` ("`:versione`" è facoltativo, il "`.`" alla fine del comando no ;-) ). - -`docker run -d mastostart[:versione]` per creare e lanciare un container. - -Per determinare il nome e l'id del container che sta girando: `docker ps`. - -Per aprire una shell sul container attivo: `docker exec -it /bin/sh -l`; per uscirne, il buon vecchio `exit`. - -Per provare il crawler che aggiorna il db delle istanze, dalla shell già aperta sul container: `/var/www/localhost/htdocs/mustard/crawler/crawl.sh`; nota: sulla mia sgrausissima adsl ci mette taaaanto tempo a finire, circa 10 ore: pigiare il buon vecchio `ctrl+c` se si vuole fermare il crawler prima che abbia finito ;-) - -Per aggiornare all'ultimo commit pubblicato su lattuga il mastostart del container attivo, dalla shell già aperta: `/root/update.sh`. - -Per aggiornare i pacchetti installati in alpine linux: `apk update && apk upgrade`. - -Per "spegnere" il container attivo: `docker stop `. - -Per riavviarlo: `docker start `. diff --git a/docker/per_hosting/files/authorized_keys b/docker/per_hosting/files/authorized_keys deleted file mode 100644 index 6352b52..0000000 --- a/docker/per_hosting/files/authorized_keys +++ /dev/null @@ -1 +0,0 @@ -ssh-rsa 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 pongi@ba04b304f62f diff --git a/docker/per_hosting/files/binit.sh b/docker/per_hosting/files/binit.sh deleted file mode 100755 index 8035521..0000000 --- a/docker/per_hosting/files/binit.sh +++ /dev/null @@ -1,26 +0,0 @@ -#!/bin/sh - -predown() { - echo "" - echo "Stoppo apache..." - httpd -k stop - sleep 1 - echo "Stoppo mysqld (pid: $mysqld_pid)..." - kill $mysqld_pid - echo "Stoppo sshd (pid: $sshd_pid)..." - kill $sshd_pid - exit 0 -} - -trap 'predown' HUP INT QUIT TERM - -echo "Lancio sshd..." -/usr/sbin/sshd -D & -sshd_pid=$! -echo "Lancio mysqld..." -/usr/bin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mariadb/plugin --user=mysql --log-error=/var/lib/mysql/mysql.err --pid-file=mysql.pid &> /dev/null & -mysqld_pid=$! -echo "Lancio apache..." -httpd -k start - -wait $! diff --git a/docker/per_hosting/files/create_user.sql b/docker/per_hosting/files/create_user.sql deleted file mode 100644 index f5b02a6..0000000 --- a/docker/per_hosting/files/create_user.sql +++ /dev/null @@ -1,4 +0,0 @@ -DELETE FROM mysql.user WHERE User='' OR USER='mysql'; -CREATE USER 'MastoStartAdmin'@'%' IDENTIFIED BY 'MastoStartAdmin'; -GRANT SELECT, INSERT, UPDATE, DELETE, LOCK TABLES ON `mastostart`.* TO 'MastoStartAdmin'@'%'; -FLUSH PRIVILEGES; diff --git a/docker/per_hosting/files/httpd.conf b/docker/per_hosting/files/httpd.conf deleted file mode 100644 index 278780c..0000000 --- a/docker/per_hosting/files/httpd.conf +++ /dev/null @@ -1,488 +0,0 @@ -# -# This is the main Apache HTTP server configuration file. It contains the -# configuration directives that give the server its instructions. -# See for detailed information. -# In particular, see -# -# for a discussion of each configuration directive. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so "logs/access_log" -# with ServerRoot set to "/usr/local/apache2" will be interpreted by the -# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" -# will be interpreted as '/logs/access_log'. - -# -# ServerTokens -# This directive configures what you return as the Server HTTP response -# Header. The default is 'Full' which sends information about the OS-Type -# and compiled in modules. -# Set to one of: Full | OS | Minor | Minimal | Major | Prod -# where Full conveys the most information, and Prod the least. -# -ServerTokens Prod - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# Do not add a slash at the end of the directory path. If you point -# ServerRoot at a non-local disk, be sure to specify a local disk on the -# Mutex directive, if file-based mutexes are used. If you wish to share the -# same ServerRoot for multiple httpd daemons, you will need to change at -# least PidFile. -# -ServerRoot /var/www - -# -# Mutex: Allows you to set the mutex mechanism and mutex file directory -# for individual mutexes, or change the global defaults -# -# Uncomment and change the directory if mutexes are file-based and the default -# mutex file directory is not on a local disk or is not appropriate for some -# other reason. -# -# Mutex default:/run/apache2 - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the -# directive. -# -# Change this to Listen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses. -# -#Listen 12.34.56.78:80 -Listen 172.17.0.2:80 - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Statically compiled modules (those listed by `httpd -l') do not need -# to be loaded here. -# -# Example: -# LoadModule foo_module modules/mod_foo.so -# -#LoadModule mpm_event_module modules/mod_mpm_event.so -LoadModule mpm_prefork_module modules/mod_mpm_prefork.so -#LoadModule mpm_worker_module modules/mod_mpm_worker.so -LoadModule authn_file_module modules/mod_authn_file.so -#LoadModule authn_dbm_module modules/mod_authn_dbm.so -#LoadModule authn_anon_module modules/mod_authn_anon.so -#LoadModule authn_dbd_module modules/mod_authn_dbd.so -#LoadModule authn_socache_module modules/mod_authn_socache.so -LoadModule authn_core_module modules/mod_authn_core.so -LoadModule authz_host_module modules/mod_authz_host.so -LoadModule authz_groupfile_module modules/mod_authz_groupfile.so -LoadModule authz_user_module modules/mod_authz_user.so -#LoadModule authz_dbm_module modules/mod_authz_dbm.so -#LoadModule authz_owner_module modules/mod_authz_owner.so -#LoadModule authz_dbd_module modules/mod_authz_dbd.so -LoadModule authz_core_module modules/mod_authz_core.so -LoadModule access_compat_module modules/mod_access_compat.so -LoadModule auth_basic_module modules/mod_auth_basic.so -#LoadModule auth_form_module modules/mod_auth_form.so -#LoadModule auth_digest_module modules/mod_auth_digest.so -#LoadModule allowmethods_module modules/mod_allowmethods.so -#LoadModule file_cache_module modules/mod_file_cache.so -#LoadModule cache_module modules/mod_cache.so -#LoadModule cache_disk_module modules/mod_cache_disk.so -#LoadModule cache_socache_module modules/mod_cache_socache.so -#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so -#LoadModule socache_dbm_module modules/mod_socache_dbm.so -#LoadModule socache_memcache_module modules/mod_socache_memcache.so -#LoadModule socache_redis_module modules/mod_socache_redis.so -#LoadModule watchdog_module modules/mod_watchdog.so -#LoadModule macro_module modules/mod_macro.so -#LoadModule dbd_module modules/mod_dbd.so -#LoadModule dumpio_module modules/mod_dumpio.so -#LoadModule echo_module modules/mod_echo.so -#LoadModule buffer_module modules/mod_buffer.so -#LoadModule data_module modules/mod_data.so -#LoadModule ratelimit_module modules/mod_ratelimit.so -LoadModule reqtimeout_module modules/mod_reqtimeout.so -#LoadModule ext_filter_module modules/mod_ext_filter.so -#LoadModule request_module modules/mod_request.so -#LoadModule include_module modules/mod_include.so -LoadModule filter_module modules/mod_filter.so -#LoadModule reflector_module modules/mod_reflector.so -#LoadModule substitute_module modules/mod_substitute.so -#LoadModule sed_module modules/mod_sed.so -#LoadModule charset_lite_module modules/mod_charset_lite.so -#LoadModule deflate_module modules/mod_deflate.so -LoadModule mime_module modules/mod_mime.so -LoadModule log_config_module modules/mod_log_config.so -#LoadModule log_debug_module modules/mod_log_debug.so -#LoadModule log_forensic_module modules/mod_log_forensic.so -#LoadModule logio_module modules/mod_logio.so -LoadModule env_module modules/mod_env.so -#LoadModule mime_magic_module modules/mod_mime_magic.so -#LoadModule expires_module modules/mod_expires.so -LoadModule headers_module modules/mod_headers.so -#LoadModule usertrack_module modules/mod_usertrack.so -#LoadModule unique_id_module modules/mod_unique_id.so -LoadModule setenvif_module modules/mod_setenvif.so -LoadModule version_module modules/mod_version.so -#LoadModule remoteip_module modules/mod_remoteip.so -#LoadModule session_module modules/mod_session.so -#LoadModule session_cookie_module modules/mod_session_cookie.so -#LoadModule session_crypto_module modules/mod_session_crypto.so -#LoadModule session_dbd_module modules/mod_session_dbd.so -#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so -#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so -#LoadModule dialup_module modules/mod_dialup.so -#LoadModule http2_module modules/mod_http2.so -LoadModule unixd_module modules/mod_unixd.so -#LoadModule heartbeat_module modules/mod_heartbeat.so -#LoadModule heartmonitor_module modules/mod_heartmonitor.so -LoadModule status_module modules/mod_status.so -LoadModule autoindex_module modules/mod_autoindex.so -#LoadModule asis_module modules/mod_asis.so -#LoadModule info_module modules/mod_info.so -#LoadModule suexec_module modules/mod_suexec.so - - #LoadModule cgid_module modules/mod_cgid.so - - - #LoadModule cgi_module modules/mod_cgi.so - -#LoadModule vhost_alias_module modules/mod_vhost_alias.so -#LoadModule negotiation_module modules/mod_negotiation.so -LoadModule dir_module modules/mod_dir.so -#LoadModule actions_module modules/mod_actions.so -#LoadModule speling_module modules/mod_speling.so -#LoadModule userdir_module modules/mod_userdir.so -LoadModule alias_module modules/mod_alias.so -LoadModule rewrite_module modules/mod_rewrite.so - -LoadModule negotiation_module modules/mod_negotiation.so - - -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# It is usually good practice to create a dedicated user and group for -# running httpd, as with most system services. -# -User apache -Group apache - - - -# 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# definition. These values also provide defaults for -# any containers you may define later in the file. -# -# All of these directives may appear inside containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. e.g. admin@your-domain.com -# -ServerAdmin pongrebio@mastodon.help - -# -# Optionally add a line containing the server version and virtual host -# name to server-generated pages (internal error documents, FTP directory -# listings, mod_status and mod_info output etc., but not CGI generated -# documents or custom error documents). -# Set to "EMail" to also include a mailto: link to the ServerAdmin. -# Set to one of: On | Off | EMail -# -ServerSignature On - -# -# ServerName gives the name and port that the server uses to identify itself. -# This can often be determined automatically, but we recommend you specify -# it explicitly to prevent problems during startup. -# -# If your host doesn't have a registered DNS name, enter its IP address here. -# -ServerName 172.17.0.2:80 - -# -# Deny access to the entirety of your server's filesystem. You must -# explicitly permit access to web content directories in other -# blocks below. -# - - AllowOverride none - Require all denied - - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/var/www/localhost/htdocs" - - # - # Possible values for the Options directive are "None", "All", - # or any combination of: - # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews - # - # Note that "MultiViews" must be named *explicitly* --- "Options All" - # doesn't give it to you. - # - # The Options directive is both complicated and important. Please see - # http://httpd.apache.org/docs/2.4/mod/core.html#options - # for more information. - # - Options Indexes FollowSymLinks - - # - # AllowOverride controls what directives may be placed in .htaccess files. - # It can be "All", "None", or any combination of the keywords: - # AllowOverride FileInfo AuthConfig Limit - # - AllowOverride All - - # - # Controls who can get stuff from this server. - # - Require all granted - - -# -# DirectoryIndex: sets the file that Apache will serve if a directory -# is requested. -# - - DirectoryIndex index.html - - -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# - - Require all denied - - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a -# container, that host's errors will be logged there and not here. -# -ErrorLog logs/error.log - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - - - # - # The following directives define some format nicknames for use with - # a CustomLog directive (see below). - # - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined - LogFormat "%h %l %u %t \"%r\" %>s %b" common - - - # You need to enable mod_logio.c to use %I and %O - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio - - - # - # The location and format of the access logfile (Common Logfile Format). - # If you do not define any access logfiles within a - # container, they will be logged here. Contrariwise, if you *do* - # define per- access logfiles, transactions will be - # logged therein and *not* in this file. - # - #CustomLog logs/access.log common - - # - # If you prefer a logfile with access, agent, and referer information - # (Combined Logfile Format) you can use the following directive. - # - CustomLog logs/access.log combined - - - - # - # Redirect: Allows you to tell clients about documents that used to - # exist in your server's namespace, but do not anymore. The client - # will make a new request for the document at its new location. - # Example: - # Redirect permanent /foo http://www.example.com/bar - - # - # Alias: Maps web paths into filesystem paths and is used to - # access content that does not live under the DocumentRoot. - # Example: - # Alias /webpath /full/filesystem/path - # - # If you include a trailing / on /webpath then the server will - # require it to be present in the URL. You will also likely - # need to provide a section to allow access to - # the filesystem path. - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the target directory are treated as applications and - # run by the server when requested rather than as documents sent to the - # client. The same rules about trailing "/" apply to ScriptAlias - # directives as to Alias. - # - ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/" - - - - - # - # ScriptSock: On threaded servers, designate the path to the UNIX - # socket used to communicate with the CGI daemon of mod_cgid. - # - #Scriptsock cgisock - - -# -# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# - - AllowOverride None - Options None - Require all granted - - - - # - # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied - # backend servers which have lingering "httpoxy" defects. - # 'Proxy' request header is undefined by the IETF, not listed by IANA - # - RequestHeader unset Proxy early - - - - # - # TypesConfig points to the file containing the list of mappings from - # filename extension to MIME-type. - # - TypesConfig /etc/apache2/mime.types - - # - # AddType allows you to add to or override the MIME configuration - # file specified in TypesConfig for specific file types. - # - #AddType application/x-gzip .tgz - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # - #AddEncoding x-compress .Z - #AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - AddType application/x-compress .Z - AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers": - # actions unrelated to filetype. These can be either built into the server - # or added with the Action directive (see below) - # - # To use CGI scripts outside of ScriptAliased directories: - # (You will also need to add "ExecCGI" to the "Options" directive.) - # - #AddHandler cgi-script .cgi - - # For type maps (negotiated resources): - #AddHandler type-map var - - # - # Filters allow you to process content before it is sent to the client. - # - # To parse .shtml files for server-side includes (SSI): - # (You will also need to add "Includes" to the "Options" directive.) - # - #AddType text/html .shtml - #AddOutputFilter INCLUDES .shtml - - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# - - MIMEMagicFile /etc/apache2/magic - - -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# MaxRanges: Maximum number of Ranges in a request before -# returning the entire resource, or one of the special -# values 'default', 'none' or 'unlimited'. -# Default setting is to accept 200 Ranges. -#MaxRanges unlimited - -# -# EnableMMAP and EnableSendfile: On systems that support it, -# memory-mapping or the sendfile syscall may be used to deliver -# files. This usually improves server performance, but must -# be turned off when serving from networked-mounted -# filesystems or if support for these functions is otherwise -# broken on your system. -# Defaults: EnableMMAP On, EnableSendfile Off -# -#EnableMMAP off -#EnableSendfile on - -# Load config files from the config directory "/etc/apache2/conf.d". -# -#IncludeOptional /etc/apache2/conf.d/*.conf - -Include /etc/apache2/conf.d/default.conf -Include /etc/apache2/conf.d/languages.conf -Include /etc/apache2/conf.d/mpm.conf -Include /etc/apache2/conf.d/php7-module.conf -Include /etc/apache2/conf.d/vhost.conf -Include /etc/apache2/conf.d/mastodon.help.conf diff --git a/docker/per_hosting/files/install.sh b/docker/per_hosting/files/install.sh deleted file mode 100755 index 7605e56..0000000 --- a/docker/per_hosting/files/install.sh +++ /dev/null @@ -1,46 +0,0 @@ -#!/bin/sh - -cd /root - -mariadb-install-db --user=mysql --basedir=/usr --datadir=/var/lib/mysql - -mysqld_safe & - -sleep 5 - -gzip -d mastostart_non_popolato.sql.gz - -mysql -e 'source mastostart_non_popolato.sql' - -mysql -e 'source create_user.sql' - -git clone https://git.lattuga.net/pongrebio/MastodonStartpage.git - -mkdir /var/www/mastodon.help - -rsync -av MastodonStartpage/web/ /var/www/mastodon.help/ - -cp /var/www/mastodon.help/mustard/sec/mustard.ini.sample /var/www/mastodon.help/mustard/sec/mustard.ini - -chown apache /etc/php7/msmtprc - -chmod go-r /etc/php7/msmtprc - -chown apache /var/log/apache2/ - -ssh-keygen -A - -addgroup pongi - -adduser -g "Pongrèbio" -G pongi -D pongi - -passwd -d pongi - -adduser pongi wheel - -mkdir /home/pongi/.ssh -mv /root/authorized_keys /home/pongi/.ssh -chown -R pongi:pongi /home/pongi/.ssh -chmod go-rx /home/pongi/.ssh - -exit 0 diff --git a/docker/per_hosting/files/mastodon.help.conf b/docker/per_hosting/files/mastodon.help.conf deleted file mode 100644 index 61e1a1b..0000000 --- a/docker/per_hosting/files/mastodon.help.conf +++ /dev/null @@ -1,27 +0,0 @@ - - - ServerAdmin pongrebio@mastodon.help - ServerName mastodon.help - - DocumentRoot "/var/www/mastodon.help" - - - Options Indexes FollowSymLinks - AllowOverride All - Require all granted - - -# SSLEngine on -# SSLProtocol -all +TLSv1.2 -# SSLHonorCipherOrder on -# SSLCipherSuite EECDH+AESGCM:AES256+EECDH:AES128+EECDH -# SSLCompression off -# SSLSessionTickets off -## SSLStaplingResponderTimeout 5 -## SSLStaplingReturnResponderErrors off -## SSLUseStapling on - -# SSLCertificateFile /etc/letsencrypt/live/mastodon.help/fullchain.pem -# SSLCertificateKeyFile /etc/letsencrypt/live/mastodon.help/privkey.pem - - diff --git a/docker/per_hosting/files/mastostart_non_popolato.sql.gz b/docker/per_hosting/files/mastostart_non_popolato.sql.gz deleted file mode 100644 index 667b116..0000000 Binary files a/docker/per_hosting/files/mastostart_non_popolato.sql.gz and /dev/null differ diff --git a/docker/per_hosting/files/msmtprc b/docker/per_hosting/files/msmtprc deleted file mode 100644 index 8c06a99..0000000 --- a/docker/per_hosting/files/msmtprc +++ /dev/null @@ -1,12 +0,0 @@ -account phpmail -host x.x.x -port 587 -tls on -auth on -user x@x.x -password xxx -from x@x.x -logfile /var/log/apache2/msmtp.log -syslog off - -account default : phpmail diff --git a/docker/per_hosting/files/my.cnf b/docker/per_hosting/files/my.cnf deleted file mode 100644 index ab328cd..0000000 --- a/docker/per_hosting/files/my.cnf +++ /dev/null @@ -1,21 +0,0 @@ -# This group is read both both by the client and the server -# use it for options that affect everything -[client-server] - -[client] -default-character-set = utf8mb4 - -[mysql] -default-character-set = utf8mb4 -auto-rehash - -# This group is read by the server -[mysqld] -collation_server = utf8mb4_unicode_ci -character_set_server = utf8mb4 - -# Disabling symbolic-links is recommended to prevent assorted security risks -symbolic-links=0 - -# include all files from the config directory -!includedir /etc/my.cnf.d diff --git a/docker/per_hosting/files/php.ini b/docker/per_hosting/files/php.ini deleted file mode 100644 index c68aaba..0000000 --- a/docker/per_hosting/files/php.ini +++ /dev/null @@ -1,1940 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (usually C:\windows) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it is -; much more verbose when it comes to errors. We recommend using the -; development version only in development environments, as errors shown to -; application users can inadvertently leak otherwise secure information. - -; This is the php.ini-production INI file. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT - -; html_errors -; Default Value: On -; Development Value: On -; Production value: On - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.sid_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to an empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It is -; generally recommended that should be used and that this feature -; should be disabled, as enabling it may result in issues when generating XML -; documents, however this remains supported for backward compatibility reasons. -; Note that this directive does not control the would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; Note: if open_basedir is set, the cache is disabled -; http://php.net/realpath-cache-size -;realpath_cache_size = 4096k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -; If enabled, scripts may be written in encodings that are incompatible with -; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such -; encodings. To use this feature, mbstring extension must be enabled. -; Default: Off -;zend.multibyte = Off - -; Allows to set the default encoding for the scripts. This value will be used -; unless "declare(encoding=...)" directive appears at the top of the script. -; Only affects if zend.multibyte is set. -; Default: "" -;zend.script_encoding = - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = On - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 30 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -;max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 2G - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it is automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL (Show all errors, warnings and notices including coding standards.) -; E_ALL & ~E_NOTICE (Show all errors, except for notices) -; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT -; http://php.net/error-reporting -error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; For production environments, we recommend logging errors rather than -; sending them to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = Off - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. We strongly recommend you -; set this to 'off' for production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = Off - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; This directive is DEPRECATED. -; Default Value: Off -; Development Value: Off -; Production Value: Off -; http://php.net/track-errors -;track_errors = Off - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of formatting the -; error message as HTML for easier reading. This directive controls whether -; the error message is formatted as HTML or not. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: On -; http://php.net/html-errors -html_errors = On - -; If html_errors is set to On *and* docref_root is not empty, then PHP -; produces clickable error messages that direct to a page describing the error -; or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty, in which -; case no links to documentation are generated. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on Windows). -;error_log = syslog - -; The syslog ident is a string which is prepended to every message logged -; to syslog. Only used when error_log is set to syslog. -;syslog.ident = php - -; The syslog facility is used to specify what type of program is logging -; the message. Only used when error_log is set to syslog. -;syslog.facility = user - -; Set this to disable filtering control characters (the default). -; Some loggers only accept NVT-ASCII, others accept anything that's not -; control characters. If your logger accepts everything, then no filtering -; is needed at all. -; Allowed values are: -; ascii (all printable ASCII characters and NL) -; no-ctrl (all characters except control characters) -; all (all characters) -; raw (like "all", but messages are not split at newlines) -; http://php.net/syslog.filter -;syslog.filter = ascii - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. G,P,C,E & S are abbreviations for the following respective super -; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty -; paid for the registration of these arrays and because ENV is not as commonly -; used as the others, ENV is not recommended on productions servers. You -; can still get access to the environment variables through getenv() should you -; need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P & C) should be -; registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive -; are specified in the same manner as the variables_order directive, -; EXCEPT one. Leaving this value empty will cause PHP to use the value set -; in the variables_order directive. It does not mean it will leave the super -; globals array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the ENV, REQUEST and SERVER variables are created when they're -; first used (Just In Time) instead of when the script starts. If these -; variables are not used within a script, having this directive on will result -; in a performance gain. The PHP directive register_argc_argv must be disabled -; for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Whether PHP will read the POST data. -; This option is enabled by default. -; Most likely, you won't want to disable this option globally. It causes $_POST -; and $_FILES to always be empty; the only way you will be able to read the -; POST data will be through the php://input stream wrapper. This can be useful -; to proxy requests or to process the POST data in a memory efficient fashion. -; http://php.net/enable-post-data-reading -;enable_post_data_reading = Off - -; Maximum size of POST data that PHP will accept. -; Its value may be 0 to disable the limit. It is ignored if POST data reading -; is disabled through enable_post_data_reading. -; http://php.net/post-max-size -post_max_size = 8M - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a media type using the Content-Type header. To -; disable this, simply set it to be empty. -; -; PHP's built-in default media type is set to text/html. -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to UTF-8. -; http://php.net/default-charset -default_charset = "UTF-8" - -; PHP internal character encoding is set to empty. -; If empty, default_charset is used. -; http://php.net/internal-encoding -;internal_encoding = - -; PHP input character encoding is set to empty. -; If empty, default_charset is used. -; http://php.net/input-encoding -;input_encoding = - -; PHP output character encoding is set to empty. -; If empty, default_charset is used. -; See also output_buffer. -; http://php.net/output-encoding -;output_encoding = - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = ".:/usr/share/php7" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -;extension_dir = "./" -; On windows: -;extension_dir = "ext" - -; Directory where the temporary files should be placed. -; Defaults to the system default (see sys_get_temp_dir) -;sys_temp_dir = "/tmp" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside -; of the web tree and people will not be able to circumvent .htaccess security. -;cgi.discard_path=1 - -; FastCGI under IIS supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If set to 0, PHP sends Status: header that -; is supported by Apache. When this option is set to 1, PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #! -; (shebang) at the top of the running script. This line might be needed if the -; script support running both as stand-alone script and via PHP CGI<. PHP in CGI -; mode skips this line and ignores its content if this directive is turned on. -; http://php.net/cgi.check-shebang-line -;cgi.check_shebang_line=1 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 2M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename -; -; For example: -; -; extension=mysqli -; -; When the extension library to load is not located in the default extension -; directory, You may specify an absolute path to the library file: -; -; extension=/path/to/extension/mysqli.so -; -; Note : The syntax used in previous PHP versions ('extension=.so' and -; 'extension='php_.dll') is supported for legacy reasons and may be -; deprecated in a future PHP major version. So, when it is possible, please -; move to the new ('extension=) syntax. -; -; Notes for Windows environments : -; -; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+) -; extension folders as well as the separate PECL DLL download (PHP 5+). -; Be sure to appropriately set the extension_dir directive. -; -;extension=bz2 -;extension=curl -;extension=fileinfo -;extension=gd2 -;extension=gettext -;extension=gmp -;extension=intl -;extension=imap -;extension=interbase -;extension=ldap -;extension=mbstring -;extension=exif ; Must be after mbstring as it depends on it -;extension=mysqli -;extension=oci8_12c ; Use with Oracle Database 12c Instant Client -;extension=odbc -;extension=openssl -;extension=pdo_firebird -;extension=pdo_mysql -;extension=pdo_oci -;extension=pdo_odbc -;extension=pdo_pgsql -;extension=pdo_sqlite -;extension=pgsql -;extension=shmop - -; The MIBS data available in the PHP distribution must be installed. -; See http://www.php.net/manual/en/snmp.installation.php -;extension=snmp - -;extension=soap -;extension=sockets -;extension=sodium -;extension=sqlite3 -;extension=tidy -;extension=xmlrpc -;extension=xsl - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[CLI Server] -; Whether the CLI web server uses ANSI color coding in its terminal output. -cli_server.color = On - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -;date.timezone = - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -; Use of this INI entry is deprecated, use global input_encoding instead. -; If empty, default_charset or input_encoding or iconv.input_encoding is used. -; The precedence is: default_charset < input_encoding < iconv.input_encoding -;iconv.input_encoding = - -; Use of this INI entry is deprecated, use global internal_encoding instead. -; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. -; The precedence is: default_charset < internal_encoding < iconv.internal_encoding -;iconv.internal_encoding = - -; Use of this INI entry is deprecated, use global output_encoding instead. -; If empty, default_charset or output_encoding or iconv.output_encoding is used. -; The precedence is: default_charset < output_encoding < iconv.output_encoding -; To use an output encoding conversion, iconv's output handler must be set -; otherwise output encoding conversion cannot be performed. -;iconv.output_encoding = - -[imap] -; rsh/ssh logins are disabled by default. Use this INI entry if you want to -; enable them. Note that the IMAP library does not filter mailbox names before -; passing them to rsh/ssh command, thus passing untrusted data to this function -; with rsh/ssh enabled is insecure. -;imap.enable_insecure_rsh=0 - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING -;intl.use_exceptions = 0 - -[sqlite3] -; Directory pointing to SQLite3 extensions -; http://php.net/sqlite3.extension-dir -;sqlite3.extension_dir = - -; SQLite defensive mode flag (only available from SQLite 3.26+) -; When the defensive flag is enabled, language features that allow ordinary -; SQL to deliberately corrupt the database file are disabled. This forbids -; writing directly to the schema, shadow tables (eg. FTS data tables), or -; the sqlite_dbpage virtual table. -; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html -; (for older SQLite versions, this flag has no use) -;sqlite3.defensive = 1 - -[Pcre] -; PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -; PCRE library recursion limit. -; Please note that if you set this value to a high number you may consume all -; the available process stack and eventually crash PHP (due to reaching the -; stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -; Enables or disables JIT compilation of patterns. This requires the PCRE -; library to be compiled with JIT support. -;pcre.jit=1 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = -sendmail_path = "/usr/bin/msmtp -C /etc/php7/msmtprc -t" - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(). -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = Off - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = -; Log mail to syslog (Event Log on Windows). -;mail.log = syslog - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -mysqlnd.collect_memory_statistics = Off - -; Records communication from all extensions using mysqlnd to the specified log -; file. -; http://php.net/mysqlnd.debug -;mysqlnd.debug = - -; Defines which queries will be logged. -;mysqlnd.log_mask = 0 - -; Default size of the mysqlnd memory pool, which is used by result sets. -;mysqlnd.mempool_default_size = 16000 - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -;mysqlnd.net_read_buffer_size = 32768 - -; Timeout for network requests in seconds. -;mysqlnd.net_read_timeout = 31536000 - -; SHA-256 Authentication Plugin related. File with the MySQL server public RSA -; key. -;mysqlnd.sha256_server_public_key = - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if -; your OS has problems with many files in one directory, and is -; a more efficient layout for servers that handle many sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -;session.save_path = "/tmp" - -; Whether to use strict session mode. -; Strict session mode does not accept an uninitialized session ID, and -; regenerates the session ID if the browser sends an uninitialized session ID. -; Strict mode protects applications from session fixation via a session adoption -; vulnerability. It is disabled by default for maximum compatibility, but -; enabling it is encouraged. -; https://wiki.php.net/rfc/strict_sessions -session.use_strict_mode = 0 - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the be-all and end-all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it -; inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF) -; Current valid values are "Strict", "Lax" or "None". When using "None", -; make sure to include the quotes, as `none` is interpreted like `false` in ini files. -; https://tools.ietf.org/html/draft-west-first-party-cookies-07 -session.cookie_samesite = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts on each request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 1 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts on each request. -; For high volume production servers, using a value of 1000 is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script is the equivalent of setting -; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 -type f | xargs rm - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users' security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Set session ID character length. This value could be between 22 to 256. -; Shorter length than default is supported only for compatibility reason. -; Users should use 32 or more chars. -; http://php.net/session.sid-length -; Default Value: 32 -; Development Value: 26 -; Production Value: 26 -session.sid_length = 26 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -;
is special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. tag's action attribute URL will not be modified -; unless it is specified. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=" -; Development Value: "a=href,area=href,frame=src,form=" -; Production Value: "a=href,area=href,frame=src,form=" -; http://php.net/url-rewriter.tags -session.trans_sid_tags = "a=href,area=href,frame=src,form=" - -; URL rewriter does not rewrite absolute URLs by default. -; To enable rewrites for absolute paths, target hosts must be specified -; at RUNTIME. i.e. use ini_set() -; tags is special. PHP will check action attribute's URL regardless -; of session.trans_sid_tags setting. -; If no host is defined, HTTP_HOST will be used for allowed host. -; Example value: php.net,www.php.net,wiki.php.net -; Use "," for multiple hosts. No spaces are allowed. -; Default Value: "" -; Development Value: "" -; Production Value: "" -;session.trans_sid_hosts="" - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.sid_bits_per_character = 5 - -; Enable upload progress tracking in $_SESSION -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.enabled -;session.upload_progress.enabled = On - -; Cleanup the progress information as soon as all POST data has been read -; (i.e. upload completed). -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.cleanup -;session.upload_progress.cleanup = On - -; A prefix used for the upload progress key in $_SESSION -; Default Value: "upload_progress_" -; Development Value: "upload_progress_" -; Production Value: "upload_progress_" -; http://php.net/session.upload-progress.prefix -;session.upload_progress.prefix = "upload_progress_" - -; The index name (concatenated with the prefix) in $_SESSION -; containing the upload progress information -; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" -; http://php.net/session.upload-progress.name -;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" - -; How frequently the upload progress should be updated. -; Given either in percentages (per-file), or in bytes -; Default Value: "1%" -; Development Value: "1%" -; Production Value: "1%" -; http://php.net/session.upload-progress.freq -;session.upload_progress.freq = "1%" - -; The minimum delay between updates, in seconds -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.upload-progress.min-freq -;session.upload_progress.min_freq = "1" - -; Only write session data when session data is changed. Enabled by default. -; http://php.net/session.lazy-write -;session.lazy_write = On - -[Assertion] -; Switch whether to compile assertions at all (to have no overhead at run-time) -; -1: Do not compile at all -; 0: Jump over assertion at run-time -; 1: Execute assertions -; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1) -; Default Value: 1 -; Development Value: 1 -; Production Value: -1 -; http://php.net/zend.assertions -zend.assertions = -1 - -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Throw an AssertionError on failed assertions -; http://php.net/assert.exception -;assert.exception = On - -; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active) -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a component's typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; This affects mb_send_mail() and mbstring.detect_order. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; Use of this INI entry is deprecated, use global internal_encoding instead. -; internal/script encoding. -; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*) -; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. -; The precedence is: default_charset < internal_encoding < iconv.internal_encoding -;mbstring.internal_encoding = - -; Use of this INI entry is deprecated, use global input_encoding instead. -; http input encoding. -; mbstring.encoding_translation = On is needed to use this setting. -; If empty, default_charset or input_encoding or mbstring.input is used. -; The precedence is: default_charset < input_encoding < mbsting.http_input -; http://php.net/mbstring.http-input -;mbstring.http_input = - -; Use of this INI entry is deprecated, use global output_encoding instead. -; http output encoding. -; mb_output_handler must be registered as output buffer to function. -; If empty, default_charset or output_encoding or mbstring.http_output is used. -; The precedence is: default_charset < output_encoding < mbstring.http_output -; To use an output encoding conversion, mbstring's output handler must be set -; otherwise output encoding conversion cannot be performed. -; http://php.net/mbstring.http-output -;mbstring.http_output = - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; "auto" detect order is changed according to mbstring.language -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -; Default: Off -;mbstring.strict_detection = On - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -; This directive specifies maximum stack depth for mbstring regular expressions. It is similar -; to the pcre.recursion_limit for PCRE. -; Default: 100000 -;mbstring.regex_stack_limit=100000 - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 1 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[dba] -;dba.default_handler= - -[opcache] -; Determines if Zend OPCache is enabled -;opcache.enable=1 - -; Determines if Zend OPCache is enabled for the CLI version of PHP -;opcache.enable_cli=0 - -; The OPcache shared memory storage size. -;opcache.memory_consumption=128 - -; The amount of memory for interned strings in Mbytes. -;opcache.interned_strings_buffer=8 - -; The maximum number of keys (scripts) in the OPcache hash table. -; Only numbers between 200 and 1000000 are allowed. -;opcache.max_accelerated_files=10000 - -; The maximum percentage of "wasted" memory until a restart is scheduled. -;opcache.max_wasted_percentage=5 - -; When this directive is enabled, the OPcache appends the current working -; directory to the script key, thus eliminating possible collisions between -; files with the same name (basename). Disabling the directive improves -; performance, but may break existing applications. -;opcache.use_cwd=1 - -; When disabled, you must reset the OPcache manually or restart the -; webserver for changes to the filesystem to take effect. -;opcache.validate_timestamps=1 - -; How often (in seconds) to check file timestamps for changes to the shared -; memory storage allocation. ("1" means validate once per second, but only -; once per request. "0" means always validate) -;opcache.revalidate_freq=2 - -; Enables or disables file search in include_path optimization -;opcache.revalidate_path=0 - -; If disabled, all PHPDoc comments are dropped from the code to reduce the -; size of the optimized code. -;opcache.save_comments=1 - -; Allow file existence override (file_exists, etc.) performance feature. -;opcache.enable_file_override=0 - -; A bitmask, where each bit enables or disables the appropriate OPcache -; passes -;opcache.optimization_level=0x7FFFBFFF - -;opcache.dups_fix=0 - -; The location of the OPcache blacklist file (wildcards allowed). -; Each OPcache blacklist file is a text file that holds the names of files -; that should not be accelerated. The file format is to add each filename -; to a new line. The filename may be a full path or just a file prefix -; (i.e., /var/www/x blacklists all the files and directories in /var/www -; that start with 'x'). Line starting with a ; are ignored (comments). -;opcache.blacklist_filename= - -; Allows exclusion of large files from being cached. By default all files -; are cached. -;opcache.max_file_size=0 - -; Check the cache checksum each N requests. -; The default value of "0" means that the checks are disabled. -;opcache.consistency_checks=0 - -; How long to wait (in seconds) for a scheduled restart to begin if the cache -; is not being accessed. -;opcache.force_restart_timeout=180 - -; OPcache error_log file name. Empty string assumes "stderr". -;opcache.error_log= - -; All OPcache errors go to the Web server log. -; By default, only fatal errors (level 0) or errors (level 1) are logged. -; You can also enable warnings (level 2), info messages (level 3) or -; debug messages (level 4). -;opcache.log_verbosity_level=1 - -; Preferred Shared Memory back-end. Leave empty and let the system decide. -;opcache.preferred_memory_model= - -; Protect the shared memory from unexpected writing during script execution. -; Useful for internal debugging only. -;opcache.protect_memory=0 - -; Allows calling OPcache API functions only from PHP scripts which path is -; started from specified string. The default "" means no restriction -;opcache.restrict_api= - -; Mapping base of shared memory segments (for Windows only). All the PHP -; processes have to map shared memory into the same address space. This -; directive allows to manually fix the "Unable to reattach to base address" -; errors. -;opcache.mmap_base= - -; Enables and sets the second level cache directory. -; It should improve performance when SHM memory is full, at server restart or -; SHM reset. The default "" disables file based caching. -;opcache.file_cache= - -; Enables or disables opcode caching in shared memory. -;opcache.file_cache_only=0 - -; Enables or disables checksum validation when script loaded from file cache. -;opcache.file_cache_consistency_checks=1 - -; Implies opcache.file_cache_only=1 for a certain process that failed to -; reattach to the shared memory (for Windows only). Explicitly enabled file -; cache is required. -;opcache.file_cache_fallback=1 - -; Enables or disables copying of PHP code (text segment) into HUGE PAGES. -; This should improve performance, but requires appropriate OS configuration. -;opcache.huge_code_pages=1 - -; Validate cached file permissions. -;opcache.validate_permission=0 - -; Prevent name collisions in chroot'ed environment. -;opcache.validate_root=0 - -; If specified, it produces opcode dumps for debugging different stages of -; optimizations. -;opcache.opt_debug_level=0 - -[curl] -; A default value for the CURLOPT_CAINFO option. This is required to be an -; absolute path. -;curl.cainfo = - -[openssl] -; The location of a Certificate Authority (CA) file on the local filesystem -; to use when verifying the identity of SSL/TLS peers. Most users should -; not specify a value for this directive as PHP will attempt to use the -; OS-managed cert stores in its absence. If specified, this value may still -; be overridden on a per-stream basis via the "cafile" SSL stream context -; option. -;openssl.cafile= - -; If openssl.cafile is not specified or if the CA file is not found, the -; directory pointed to by openssl.capath is searched for a suitable -; certificate. This value must be a correctly hashed certificate directory. -; Most users should not specify a value for this directive as PHP will -; attempt to use the OS-managed cert stores in its absence. If specified, -; this value may still be overridden on a per-stream basis via the "capath" -; SSL stream context option. -;openssl.capath= - -; Local Variables: -; tab-width: 4 -; End: diff --git a/docker/per_hosting/files/sshd_config b/docker/per_hosting/files/sshd_config deleted file mode 100644 index 6695bb6..0000000 --- a/docker/per_hosting/files/sshd_config +++ /dev/null @@ -1,123 +0,0 @@ -# $OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/bin:/usr/bin:/sbin:/usr/sbin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options override the -# default value. - -#Port 22 -#AddressFamily any -#ListenAddress 0.0.0.0 -#ListenAddress :: - -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_ecdsa_key -#HostKey /etc/ssh/ssh_host_ed25519_key - -# Ciphers and keying -#RekeyLimit default none - -# Logging -#SyslogFacility AUTH -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -#PermitRootLogin prohibit-password -PermitRootLogin no -#StrictModes yes -#MaxAuthTries 6 -#MaxSessions 10 - -#PubkeyAuthentication yes - -# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 -# but this is overridden so installations will only check .ssh/authorized_keys -AuthorizedKeysFile .ssh/authorized_keys - -#AuthorizedPrincipalsFile none - -#AuthorizedKeysCommand none -#AuthorizedKeysCommandUser nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# To disable tunneled clear text passwords, change to no here! -#PasswordAuthentication yes -PasswordAuthentication no -#PermitEmptyPasswords no - -# Change to no to disable s/key passwords -#ChallengeResponseAuthentication yes -ChallengeResponseAuthentication no - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no - -# GSSAPI options -#GSSAPIAuthentication no -#GSSAPICleanupCredentials yes - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. -#UsePAM no - -#AllowAgentForwarding yes -# Feel free to re-enable these if your use case requires them. -AllowTcpForwarding no -GatewayPorts no -X11Forwarding no -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PermitTTY yes -#PrintMotd yes -#PrintLastLog yes -#TCPKeepAlive yes -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#UseDNS no -#PidFile /run/sshd.pid -#MaxStartups 10:30:100 -#PermitTunnel no -#ChrootDirectory none -#VersionAddendum none - -# no default banner path -#Banner none - -# override default of no subsystems -Subsystem sftp /usr/lib/ssh/sftp-server - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# PermitTTY no -# ForceCommand cvs server - -AllowUsers pongi - diff --git a/docker/per_hosting/files/sudo.conf b/docker/per_hosting/files/sudo.conf deleted file mode 100644 index 168a497..0000000 --- a/docker/per_hosting/files/sudo.conf +++ /dev/null @@ -1 +0,0 @@ -Set disable_coredump false diff --git a/docker/per_hosting/files/sudoers b/docker/per_hosting/files/sudoers deleted file mode 100644 index f4a262a..0000000 --- a/docker/per_hosting/files/sudoers +++ /dev/null @@ -1,97 +0,0 @@ -## sudoers file. -## -## This file MUST be edited with the 'visudo' command as root. -## Failure to use 'visudo' may result in syntax or file permission errors -## that prevent sudo from running. -## -## See the sudoers man page for the details on how to write a sudoers file. -## - -## -## Host alias specification -## -## Groups of machines. These may include host names (optionally with wildcards), -## IP addresses, network numbers or netgroups. -# Host_Alias WEBSERVERS = www1, www2, www3 - -## -## User alias specification -## -## Groups of users. These may consist of user names, uids, Unix groups, -## or netgroups. -# User_Alias ADMINS = millert, dowdy, mikef - -## -## Cmnd alias specification -## -## Groups of commands. Often used to group related commands together. -# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \ -# /usr/bin/pkill, /usr/bin/top -# Cmnd_Alias REBOOT = /sbin/halt, /sbin/reboot, /sbin/poweroff - -## -## Defaults specification -## -## You may wish to keep some of the following environment variables -## when running commands via sudo. -## -## Locale settings -# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET" -## -## Run X applications through sudo; HOME is used to find the -## .Xauthority file. Note that other programs use HOME to find -## configuration files and this may lead to privilege escalation! -# Defaults env_keep += "HOME" -## -## X11 resource path settings -# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH" -## -## Desktop path settings -# Defaults env_keep += "QTDIR KDEDIR" -## -## Allow sudo-run commands to inherit the callers' ConsoleKit session -# Defaults env_keep += "XDG_SESSION_COOKIE" -## -## Uncomment to enable special input methods. Care should be taken as -## this may allow users to subvert the command being run via sudo. -# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER" -## -## Uncomment to use a hard-coded PATH instead of the user's to find commands -# Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" -## -## Uncomment to send mail if the user does not enter the correct password. -# Defaults mail_badpass -## -## Uncomment to enable logging of a command's output, except for -## sudoreplay and reboot. Use sudoreplay to play back logged sessions. -# Defaults log_output -# Defaults!/usr/bin/sudoreplay !log_output -# Defaults!/usr/local/bin/sudoreplay !log_output -# Defaults!REBOOT !log_output - -## -## Runas alias specification -## - -## -## User privilege specification -## -root ALL=(ALL) ALL - -## Uncomment to allow members of group wheel to execute any command -# %wheel ALL=(ALL) ALL - -## Same thing without a password -%wheel ALL=(ALL) NOPASSWD: ALL - -## Uncomment to allow members of group sudo to execute any command -# %sudo ALL=(ALL) ALL - -## Uncomment to allow any user to run sudo if they know the password -## of the user they are running the command as (root by default). -# Defaults targetpw # Ask for the password of the target user -# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw' - -## Read drop-in files from /etc/sudoers.d -## (the '#' here does not indicate a comment) -#includedir /etc/sudoers.d diff --git a/docker/per_hosting/files/update.sh b/docker/per_hosting/files/update.sh deleted file mode 100755 index aefa834..0000000 --- a/docker/per_hosting/files/update.sh +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/sh -BASEDIR=$(dirname "$0") -cd "$BASEDIR/MastodonStartpage" -git pull -cd .. -rsync -av --filter "protect mustard/crawler/peers" --filter "protect mustard/sec/mustard.ini" --delete-after MastodonStartpage/web/ /var/www/mastodon.help/ diff --git a/docker/per_hosting/files/vhost.conf b/docker/per_hosting/files/vhost.conf deleted file mode 100644 index 4b7d130..0000000 --- a/docker/per_hosting/files/vhost.conf +++ /dev/null @@ -1,6 +0,0 @@ - - - ServerAdmin pongrebio@mastodon.help - DocumentRoot "/var/www/localhost/htdocs" - - diff --git a/docker/prova/Dockerfile b/docker/prova/Dockerfile deleted file mode 100644 index 8fe366b..0000000 --- a/docker/prova/Dockerfile +++ /dev/null @@ -1,13 +0,0 @@ -FROM alpine:3 -RUN apk add --no-cache apache2 php7 php7-apache2 php7-mysqli php7-mbstring php7-pcntl php7-intl php7-json php7-session mariadb mariadb-client git rsync msmtp -COPY files/my.cnf /etc/my.cnf -COPY files/httpd.conf /etc/apache2/ -COPY files/php.ini /etc/php7/ -COPY files/msmtprc /etc/php7/ -COPY files/binit.sh /usr/local/bin/ -COPY files/update.sh /root/ -COPY files/mastostart_popolato.sql.gz /root/ -COPY files/create_user.sql /root/ -COPY files/install.sh /root/ -RUN /root/install.sh -CMD /usr/local/bin/binit.sh diff --git a/docker/prova/README.md b/docker/prova/README.md deleted file mode 100644 index aa0de4a..0000000 --- a/docker/prova/README.md +++ /dev/null @@ -1,25 +0,0 @@ -Questa cartella contiene il Dockerfile e quel che serve per generare un'immagine docker di mastostart su cui è possibile fare prove. L'immagine è basata su alpine linux e contiene apache, php, mariadb già configurati. Al momento pesa circa 450 mb. - -### Come generare l'immagine docker - -`git clone https://git.lattuga.net/pongrebio/MastodonStartpage.git` per clonare questo repo in locale. - -Dalla directory `docker/prova` del repo clonato: `docker build -t mastostart[:versione] .` (":versione" è facoltativo, il "." alla fine del comando no ;-) ). - -`docker run -d mastostart[:versione]` per creare e lanciare un container. - -A questo punto, per vedere in locale la Mastodon Startpage, aprire un browser su [http://172.17.0.2](http://172.17.0.2). - -Se si vuole provare anche Mustard, il "lato admin" del motore di ricerca istanze mastodon che stiamo accrocchiando (e il cui "lato utente" è ancora da fare), aprire il browser su [http://172.17.0.2/mustard](http://172.17.0.2/mustard); email `pongrebio@insicuri.net` e password `password` per entrare come admin; email `mastodon@bida.im` e password `password` per entrare come "admin di un'istanza invitata". La possibilità di invitare admin di altre istanze non è attiva, al momento. - -Per determinare il nome e l'id del container che sta girando: `docker ps`. - -Per provare il crawler che aggiorna il db delle istanze: `docker exec -it /var/www/localhost/htdocs/mustard/crawler/crawl.sh` (sulla mia sgrausissima adsl ci mette taaaanto tempo a finire, circa 10 ore: pigiare il buon vecchio `ctrl+c` se si vuole fermare il crawler prima che abbia finito ;-) ). - -Per aggiornare all'ultimo commit pubblicato su lattuga il mastostart del container attivo: `docker exec -it /root/update.sh`. - -Per aprire una shell sul container attivo: `docker exec -it /bin/sh -l`; per uscirne, il buon vecchio `exit`. - -Per "spegnere" il container attivo: `docker stop `. - -Per riavviarlo: `docker start `. diff --git a/docker/prova/files/binit.sh b/docker/prova/files/binit.sh deleted file mode 100755 index e3b596c..0000000 --- a/docker/prova/files/binit.sh +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh - -predown() { - echo -e "\nStoppo tutto..." - echo "Stoppo apache..." - httpd -k stop - echo "Stoppo mysqld (pid: $mysqld_pid)..." - kill $mysqld_pid - exit 0 -} - -trap 'predown' HUP INT QUIT TERM - -echo "Lancio mysqld..." -/usr/bin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mariadb/plugin --user=mysql --log-error=/var/lib/mysql/mysql.err --pid-file=mysql.pid &> /dev/null & -mysqld_pid=$! -echo "Lancio apache..." -httpd -k start - -wait $! diff --git a/docker/prova/files/create_user.sql b/docker/prova/files/create_user.sql deleted file mode 100644 index f5b02a6..0000000 --- a/docker/prova/files/create_user.sql +++ /dev/null @@ -1,4 +0,0 @@ -DELETE FROM mysql.user WHERE User='' OR USER='mysql'; -CREATE USER 'MastoStartAdmin'@'%' IDENTIFIED BY 'MastoStartAdmin'; -GRANT SELECT, INSERT, UPDATE, DELETE, LOCK TABLES ON `mastostart`.* TO 'MastoStartAdmin'@'%'; -FLUSH PRIVILEGES; diff --git a/docker/prova/files/httpd.conf b/docker/prova/files/httpd.conf deleted file mode 100644 index ac45565..0000000 --- a/docker/prova/files/httpd.conf +++ /dev/null @@ -1,486 +0,0 @@ -# -# This is the main Apache HTTP server configuration file. It contains the -# configuration directives that give the server its instructions. -# See for detailed information. -# In particular, see -# -# for a discussion of each configuration directive. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so "logs/access_log" -# with ServerRoot set to "/usr/local/apache2" will be interpreted by the -# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" -# will be interpreted as '/logs/access_log'. - -# -# ServerTokens -# This directive configures what you return as the Server HTTP response -# Header. The default is 'Full' which sends information about the OS-Type -# and compiled in modules. -# Set to one of: Full | OS | Minor | Minimal | Major | Prod -# where Full conveys the most information, and Prod the least. -# -ServerTokens Prod - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# Do not add a slash at the end of the directory path. If you point -# ServerRoot at a non-local disk, be sure to specify a local disk on the -# Mutex directive, if file-based mutexes are used. If you wish to share the -# same ServerRoot for multiple httpd daemons, you will need to change at -# least PidFile. -# -ServerRoot /var/www - -# -# Mutex: Allows you to set the mutex mechanism and mutex file directory -# for individual mutexes, or change the global defaults -# -# Uncomment and change the directory if mutexes are file-based and the default -# mutex file directory is not on a local disk or is not appropriate for some -# other reason. -# -# Mutex default:/run/apache2 - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the -# directive. -# -# Change this to Listen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses. -# -#Listen 12.34.56.78:80 -Listen 80 - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Statically compiled modules (those listed by `httpd -l') do not need -# to be loaded here. -# -# Example: -# LoadModule foo_module modules/mod_foo.so -# -#LoadModule mpm_event_module modules/mod_mpm_event.so -LoadModule mpm_prefork_module modules/mod_mpm_prefork.so -#LoadModule mpm_worker_module modules/mod_mpm_worker.so -LoadModule authn_file_module modules/mod_authn_file.so -#LoadModule authn_dbm_module modules/mod_authn_dbm.so -#LoadModule authn_anon_module modules/mod_authn_anon.so -#LoadModule authn_dbd_module modules/mod_authn_dbd.so -#LoadModule authn_socache_module modules/mod_authn_socache.so -LoadModule authn_core_module modules/mod_authn_core.so -LoadModule authz_host_module modules/mod_authz_host.so -LoadModule authz_groupfile_module modules/mod_authz_groupfile.so -LoadModule authz_user_module modules/mod_authz_user.so -#LoadModule authz_dbm_module modules/mod_authz_dbm.so -#LoadModule authz_owner_module modules/mod_authz_owner.so -#LoadModule authz_dbd_module modules/mod_authz_dbd.so -LoadModule authz_core_module modules/mod_authz_core.so -LoadModule access_compat_module modules/mod_access_compat.so -LoadModule auth_basic_module modules/mod_auth_basic.so -#LoadModule auth_form_module modules/mod_auth_form.so -#LoadModule auth_digest_module modules/mod_auth_digest.so -#LoadModule allowmethods_module modules/mod_allowmethods.so -#LoadModule file_cache_module modules/mod_file_cache.so -#LoadModule cache_module modules/mod_cache.so -#LoadModule cache_disk_module modules/mod_cache_disk.so -#LoadModule cache_socache_module modules/mod_cache_socache.so -#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so -#LoadModule socache_dbm_module modules/mod_socache_dbm.so -#LoadModule socache_memcache_module modules/mod_socache_memcache.so -#LoadModule socache_redis_module modules/mod_socache_redis.so -#LoadModule watchdog_module modules/mod_watchdog.so -#LoadModule macro_module modules/mod_macro.so -#LoadModule dbd_module modules/mod_dbd.so -#LoadModule dumpio_module modules/mod_dumpio.so -#LoadModule echo_module modules/mod_echo.so -#LoadModule buffer_module modules/mod_buffer.so -#LoadModule data_module modules/mod_data.so -#LoadModule ratelimit_module modules/mod_ratelimit.so -LoadModule reqtimeout_module modules/mod_reqtimeout.so -#LoadModule ext_filter_module modules/mod_ext_filter.so -#LoadModule request_module modules/mod_request.so -#LoadModule include_module modules/mod_include.so -LoadModule filter_module modules/mod_filter.so -#LoadModule reflector_module modules/mod_reflector.so -#LoadModule substitute_module modules/mod_substitute.so -#LoadModule sed_module modules/mod_sed.so -#LoadModule charset_lite_module modules/mod_charset_lite.so -#LoadModule deflate_module modules/mod_deflate.so -LoadModule mime_module modules/mod_mime.so -LoadModule log_config_module modules/mod_log_config.so -#LoadModule log_debug_module modules/mod_log_debug.so -#LoadModule log_forensic_module modules/mod_log_forensic.so -#LoadModule logio_module modules/mod_logio.so -LoadModule env_module modules/mod_env.so -#LoadModule mime_magic_module modules/mod_mime_magic.so -#LoadModule expires_module modules/mod_expires.so -LoadModule headers_module modules/mod_headers.so -#LoadModule usertrack_module modules/mod_usertrack.so -#LoadModule unique_id_module modules/mod_unique_id.so -LoadModule setenvif_module modules/mod_setenvif.so -LoadModule version_module modules/mod_version.so -#LoadModule remoteip_module modules/mod_remoteip.so -#LoadModule session_module modules/mod_session.so -#LoadModule session_cookie_module modules/mod_session_cookie.so -#LoadModule session_crypto_module modules/mod_session_crypto.so -#LoadModule session_dbd_module modules/mod_session_dbd.so -#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so -#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so -#LoadModule dialup_module modules/mod_dialup.so -#LoadModule http2_module modules/mod_http2.so -LoadModule unixd_module modules/mod_unixd.so -#LoadModule heartbeat_module modules/mod_heartbeat.so -#LoadModule heartmonitor_module modules/mod_heartmonitor.so -LoadModule status_module modules/mod_status.so -LoadModule autoindex_module modules/mod_autoindex.so -#LoadModule asis_module modules/mod_asis.so -#LoadModule info_module modules/mod_info.so -#LoadModule suexec_module modules/mod_suexec.so - - #LoadModule cgid_module modules/mod_cgid.so - - - #LoadModule cgi_module modules/mod_cgi.so - -#LoadModule vhost_alias_module modules/mod_vhost_alias.so -#LoadModule negotiation_module modules/mod_negotiation.so -LoadModule dir_module modules/mod_dir.so -#LoadModule actions_module modules/mod_actions.so -#LoadModule speling_module modules/mod_speling.so -#LoadModule userdir_module modules/mod_userdir.so -LoadModule alias_module modules/mod_alias.so -LoadModule rewrite_module modules/mod_rewrite.so - -LoadModule negotiation_module modules/mod_negotiation.so - - -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# It is usually good practice to create a dedicated user and group for -# running httpd, as with most system services. -# -User apache -Group apache - - - -# 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# definition. These values also provide defaults for -# any containers you may define later in the file. -# -# All of these directives may appear inside containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. e.g. admin@your-domain.com -# -ServerAdmin pongrebio@mastodon.help - -# -# Optionally add a line containing the server version and virtual host -# name to server-generated pages (internal error documents, FTP directory -# listings, mod_status and mod_info output etc., but not CGI generated -# documents or custom error documents). -# Set to "EMail" to also include a mailto: link to the ServerAdmin. -# Set to one of: On | Off | EMail -# -ServerSignature On - -# -# ServerName gives the name and port that the server uses to identify itself. -# This can often be determined automatically, but we recommend you specify -# it explicitly to prevent problems during startup. -# -# If your host doesn't have a registered DNS name, enter its IP address here. -# -ServerName 172.17.0.2:80 - -# -# Deny access to the entirety of your server's filesystem. You must -# explicitly permit access to web content directories in other -# blocks below. -# - - AllowOverride none - Require all denied - - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/var/www/localhost/htdocs" - - # - # Possible values for the Options directive are "None", "All", - # or any combination of: - # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews - # - # Note that "MultiViews" must be named *explicitly* --- "Options All" - # doesn't give it to you. - # - # The Options directive is both complicated and important. Please see - # http://httpd.apache.org/docs/2.4/mod/core.html#options - # for more information. - # - Options Indexes FollowSymLinks - - # - # AllowOverride controls what directives may be placed in .htaccess files. - # It can be "All", "None", or any combination of the keywords: - # AllowOverride FileInfo AuthConfig Limit - # - AllowOverride All - - # - # Controls who can get stuff from this server. - # - Require all granted - - -# -# DirectoryIndex: sets the file that Apache will serve if a directory -# is requested. -# - - DirectoryIndex index.html - - -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# - - Require all denied - - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a -# container, that host's errors will be logged there and not here. -# -ErrorLog logs/error.log - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - - - # - # The following directives define some format nicknames for use with - # a CustomLog directive (see below). - # - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined - LogFormat "%h %l %u %t \"%r\" %>s %b" common - - - # You need to enable mod_logio.c to use %I and %O - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio - - - # - # The location and format of the access logfile (Common Logfile Format). - # If you do not define any access logfiles within a - # container, they will be logged here. Contrariwise, if you *do* - # define per- access logfiles, transactions will be - # logged therein and *not* in this file. - # - #CustomLog logs/access.log common - - # - # If you prefer a logfile with access, agent, and referer information - # (Combined Logfile Format) you can use the following directive. - # - CustomLog logs/access.log combined - - - - # - # Redirect: Allows you to tell clients about documents that used to - # exist in your server's namespace, but do not anymore. The client - # will make a new request for the document at its new location. - # Example: - # Redirect permanent /foo http://www.example.com/bar - - # - # Alias: Maps web paths into filesystem paths and is used to - # access content that does not live under the DocumentRoot. - # Example: - # Alias /webpath /full/filesystem/path - # - # If you include a trailing / on /webpath then the server will - # require it to be present in the URL. You will also likely - # need to provide a section to allow access to - # the filesystem path. - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the target directory are treated as applications and - # run by the server when requested rather than as documents sent to the - # client. The same rules about trailing "/" apply to ScriptAlias - # directives as to Alias. - # - ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/" - - - - - # - # ScriptSock: On threaded servers, designate the path to the UNIX - # socket used to communicate with the CGI daemon of mod_cgid. - # - #Scriptsock cgisock - - -# -# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# - - AllowOverride None - Options None - Require all granted - - - - # - # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied - # backend servers which have lingering "httpoxy" defects. - # 'Proxy' request header is undefined by the IETF, not listed by IANA - # - RequestHeader unset Proxy early - - - - # - # TypesConfig points to the file containing the list of mappings from - # filename extension to MIME-type. - # - TypesConfig /etc/apache2/mime.types - - # - # AddType allows you to add to or override the MIME configuration - # file specified in TypesConfig for specific file types. - # - #AddType application/x-gzip .tgz - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # - #AddEncoding x-compress .Z - #AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - AddType application/x-compress .Z - AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers": - # actions unrelated to filetype. These can be either built into the server - # or added with the Action directive (see below) - # - # To use CGI scripts outside of ScriptAliased directories: - # (You will also need to add "ExecCGI" to the "Options" directive.) - # - #AddHandler cgi-script .cgi - - # For type maps (negotiated resources): - #AddHandler type-map var - - # - # Filters allow you to process content before it is sent to the client. - # - # To parse .shtml files for server-side includes (SSI): - # (You will also need to add "Includes" to the "Options" directive.) - # - #AddType text/html .shtml - #AddOutputFilter INCLUDES .shtml - - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# - - MIMEMagicFile /etc/apache2/magic - - -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# MaxRanges: Maximum number of Ranges in a request before -# returning the entire resource, or one of the special -# values 'default', 'none' or 'unlimited'. -# Default setting is to accept 200 Ranges. -#MaxRanges unlimited - -# -# EnableMMAP and EnableSendfile: On systems that support it, -# memory-mapping or the sendfile syscall may be used to deliver -# files. This usually improves server performance, but must -# be turned off when serving from networked-mounted -# filesystems or if support for these functions is otherwise -# broken on your system. -# Defaults: EnableMMAP On, EnableSendfile Off -# -#EnableMMAP off -#EnableSendfile on - -# Load config files from the config directory "/etc/apache2/conf.d". -# -#IncludeOptional /etc/apache2/conf.d/*.conf - -Include /etc/apache2/conf.d/default.conf -Include /etc/apache2/conf.d/languages.conf -Include /etc/apache2/conf.d/mpm.conf -Include /etc/apache2/conf.d/php7-module.conf diff --git a/docker/prova/files/install.sh b/docker/prova/files/install.sh deleted file mode 100755 index 3088713..0000000 --- a/docker/prova/files/install.sh +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/sh - -cd /root - -mariadb-install-db --user=mysql --basedir=/usr --datadir=/var/lib/mysql - -mysqld_safe & - -sleep 5 - -gzip -d mastostart_popolato.sql.gz - -mysql -e 'source mastostart_popolato.sql' - -mysql -e 'source create_user.sql' - -rm /var/www/localhost/htdocs/index.html - -git clone https://git.lattuga.net/pongrebio/MastodonStartpage.git - -rsync -av MastodonStartpage/web/ /var/www/localhost/htdocs/ - -cp /var/www/localhost/htdocs/mustard/sec/mustard.ini.sample /var/www/localhost/htdocs/mustard/sec/mustard.ini - -chown apache /etc/php7/msmtprc - -chmod go-r /etc/php7/msmtprc - -chown apache /var/log/apache2/ - -exit 0 diff --git a/docker/prova/files/mastostart_popolato.sql.gz b/docker/prova/files/mastostart_popolato.sql.gz deleted file mode 100644 index e2ed0b0..0000000 Binary files a/docker/prova/files/mastostart_popolato.sql.gz and /dev/null differ diff --git a/docker/prova/files/msmtprc b/docker/prova/files/msmtprc deleted file mode 100644 index 8c06a99..0000000 --- a/docker/prova/files/msmtprc +++ /dev/null @@ -1,12 +0,0 @@ -account phpmail -host x.x.x -port 587 -tls on -auth on -user x@x.x -password xxx -from x@x.x -logfile /var/log/apache2/msmtp.log -syslog off - -account default : phpmail diff --git a/docker/prova/files/my.cnf b/docker/prova/files/my.cnf deleted file mode 100644 index ab328cd..0000000 --- a/docker/prova/files/my.cnf +++ /dev/null @@ -1,21 +0,0 @@ -# This group is read both both by the client and the server -# use it for options that affect everything -[client-server] - -[client] -default-character-set = utf8mb4 - -[mysql] -default-character-set = utf8mb4 -auto-rehash - -# This group is read by the server -[mysqld] -collation_server = utf8mb4_unicode_ci -character_set_server = utf8mb4 - -# Disabling symbolic-links is recommended to prevent assorted security risks -symbolic-links=0 - -# include all files from the config directory -!includedir /etc/my.cnf.d diff --git a/docker/prova/files/php.ini b/docker/prova/files/php.ini deleted file mode 100644 index c68aaba..0000000 --- a/docker/prova/files/php.ini +++ /dev/null @@ -1,1940 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (usually C:\windows) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it is -; much more verbose when it comes to errors. We recommend using the -; development version only in development environments, as errors shown to -; application users can inadvertently leak otherwise secure information. - -; This is the php.ini-production INI file. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT - -; html_errors -; Default Value: On -; Development Value: On -; Production value: On - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.sid_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to an empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It is -; generally recommended that should be used and that this feature -; should be disabled, as enabling it may result in issues when generating XML -; documents, however this remains supported for backward compatibility reasons. -; Note that this directive does not control the would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; Note: if open_basedir is set, the cache is disabled -; http://php.net/realpath-cache-size -;realpath_cache_size = 4096k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -; If enabled, scripts may be written in encodings that are incompatible with -; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such -; encodings. To use this feature, mbstring extension must be enabled. -; Default: Off -;zend.multibyte = Off - -; Allows to set the default encoding for the scripts. This value will be used -; unless "declare(encoding=...)" directive appears at the top of the script. -; Only affects if zend.multibyte is set. -; Default: "" -;zend.script_encoding = - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = On - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 30 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -;max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 2G - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it is automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL (Show all errors, warnings and notices including coding standards.) -; E_ALL & ~E_NOTICE (Show all errors, except for notices) -; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT -; http://php.net/error-reporting -error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; For production environments, we recommend logging errors rather than -; sending them to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = Off - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. We strongly recommend you -; set this to 'off' for production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = Off - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; This directive is DEPRECATED. -; Default Value: Off -; Development Value: Off -; Production Value: Off -; http://php.net/track-errors -;track_errors = Off - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of formatting the -; error message as HTML for easier reading. This directive controls whether -; the error message is formatted as HTML or not. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: On -; http://php.net/html-errors -html_errors = On - -; If html_errors is set to On *and* docref_root is not empty, then PHP -; produces clickable error messages that direct to a page describing the error -; or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty, in which -; case no links to documentation are generated. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on Windows). -;error_log = syslog - -; The syslog ident is a string which is prepended to every message logged -; to syslog. Only used when error_log is set to syslog. -;syslog.ident = php - -; The syslog facility is used to specify what type of program is logging -; the message. Only used when error_log is set to syslog. -;syslog.facility = user - -; Set this to disable filtering control characters (the default). -; Some loggers only accept NVT-ASCII, others accept anything that's not -; control characters. If your logger accepts everything, then no filtering -; is needed at all. -; Allowed values are: -; ascii (all printable ASCII characters and NL) -; no-ctrl (all characters except control characters) -; all (all characters) -; raw (like "all", but messages are not split at newlines) -; http://php.net/syslog.filter -;syslog.filter = ascii - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. G,P,C,E & S are abbreviations for the following respective super -; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty -; paid for the registration of these arrays and because ENV is not as commonly -; used as the others, ENV is not recommended on productions servers. You -; can still get access to the environment variables through getenv() should you -; need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P & C) should be -; registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive -; are specified in the same manner as the variables_order directive, -; EXCEPT one. Leaving this value empty will cause PHP to use the value set -; in the variables_order directive. It does not mean it will leave the super -; globals array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the ENV, REQUEST and SERVER variables are created when they're -; first used (Just In Time) instead of when the script starts. If these -; variables are not used within a script, having this directive on will result -; in a performance gain. The PHP directive register_argc_argv must be disabled -; for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Whether PHP will read the POST data. -; This option is enabled by default. -; Most likely, you won't want to disable this option globally. It causes $_POST -; and $_FILES to always be empty; the only way you will be able to read the -; POST data will be through the php://input stream wrapper. This can be useful -; to proxy requests or to process the POST data in a memory efficient fashion. -; http://php.net/enable-post-data-reading -;enable_post_data_reading = Off - -; Maximum size of POST data that PHP will accept. -; Its value may be 0 to disable the limit. It is ignored if POST data reading -; is disabled through enable_post_data_reading. -; http://php.net/post-max-size -post_max_size = 8M - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a media type using the Content-Type header. To -; disable this, simply set it to be empty. -; -; PHP's built-in default media type is set to text/html. -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to UTF-8. -; http://php.net/default-charset -default_charset = "UTF-8" - -; PHP internal character encoding is set to empty. -; If empty, default_charset is used. -; http://php.net/internal-encoding -;internal_encoding = - -; PHP input character encoding is set to empty. -; If empty, default_charset is used. -; http://php.net/input-encoding -;input_encoding = - -; PHP output character encoding is set to empty. -; If empty, default_charset is used. -; See also output_buffer. -; http://php.net/output-encoding -;output_encoding = - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = ".:/usr/share/php7" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -;extension_dir = "./" -; On windows: -;extension_dir = "ext" - -; Directory where the temporary files should be placed. -; Defaults to the system default (see sys_get_temp_dir) -;sys_temp_dir = "/tmp" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside -; of the web tree and people will not be able to circumvent .htaccess security. -;cgi.discard_path=1 - -; FastCGI under IIS supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If set to 0, PHP sends Status: header that -; is supported by Apache. When this option is set to 1, PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #! -; (shebang) at the top of the running script. This line might be needed if the -; script support running both as stand-alone script and via PHP CGI<. PHP in CGI -; mode skips this line and ignores its content if this directive is turned on. -; http://php.net/cgi.check-shebang-line -;cgi.check_shebang_line=1 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 2M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename -; -; For example: -; -; extension=mysqli -; -; When the extension library to load is not located in the default extension -; directory, You may specify an absolute path to the library file: -; -; extension=/path/to/extension/mysqli.so -; -; Note : The syntax used in previous PHP versions ('extension=.so' and -; 'extension='php_.dll') is supported for legacy reasons and may be -; deprecated in a future PHP major version. So, when it is possible, please -; move to the new ('extension=) syntax. -; -; Notes for Windows environments : -; -; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+) -; extension folders as well as the separate PECL DLL download (PHP 5+). -; Be sure to appropriately set the extension_dir directive. -; -;extension=bz2 -;extension=curl -;extension=fileinfo -;extension=gd2 -;extension=gettext -;extension=gmp -;extension=intl -;extension=imap -;extension=interbase -;extension=ldap -;extension=mbstring -;extension=exif ; Must be after mbstring as it depends on it -;extension=mysqli -;extension=oci8_12c ; Use with Oracle Database 12c Instant Client -;extension=odbc -;extension=openssl -;extension=pdo_firebird -;extension=pdo_mysql -;extension=pdo_oci -;extension=pdo_odbc -;extension=pdo_pgsql -;extension=pdo_sqlite -;extension=pgsql -;extension=shmop - -; The MIBS data available in the PHP distribution must be installed. -; See http://www.php.net/manual/en/snmp.installation.php -;extension=snmp - -;extension=soap -;extension=sockets -;extension=sodium -;extension=sqlite3 -;extension=tidy -;extension=xmlrpc -;extension=xsl - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[CLI Server] -; Whether the CLI web server uses ANSI color coding in its terminal output. -cli_server.color = On - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -;date.timezone = - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -; Use of this INI entry is deprecated, use global input_encoding instead. -; If empty, default_charset or input_encoding or iconv.input_encoding is used. -; The precedence is: default_charset < input_encoding < iconv.input_encoding -;iconv.input_encoding = - -; Use of this INI entry is deprecated, use global internal_encoding instead. -; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. -; The precedence is: default_charset < internal_encoding < iconv.internal_encoding -;iconv.internal_encoding = - -; Use of this INI entry is deprecated, use global output_encoding instead. -; If empty, default_charset or output_encoding or iconv.output_encoding is used. -; The precedence is: default_charset < output_encoding < iconv.output_encoding -; To use an output encoding conversion, iconv's output handler must be set -; otherwise output encoding conversion cannot be performed. -;iconv.output_encoding = - -[imap] -; rsh/ssh logins are disabled by default. Use this INI entry if you want to -; enable them. Note that the IMAP library does not filter mailbox names before -; passing them to rsh/ssh command, thus passing untrusted data to this function -; with rsh/ssh enabled is insecure. -;imap.enable_insecure_rsh=0 - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING -;intl.use_exceptions = 0 - -[sqlite3] -; Directory pointing to SQLite3 extensions -; http://php.net/sqlite3.extension-dir -;sqlite3.extension_dir = - -; SQLite defensive mode flag (only available from SQLite 3.26+) -; When the defensive flag is enabled, language features that allow ordinary -; SQL to deliberately corrupt the database file are disabled. This forbids -; writing directly to the schema, shadow tables (eg. FTS data tables), or -; the sqlite_dbpage virtual table. -; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html -; (for older SQLite versions, this flag has no use) -;sqlite3.defensive = 1 - -[Pcre] -; PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -; PCRE library recursion limit. -; Please note that if you set this value to a high number you may consume all -; the available process stack and eventually crash PHP (due to reaching the -; stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -; Enables or disables JIT compilation of patterns. This requires the PCRE -; library to be compiled with JIT support. -;pcre.jit=1 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = -sendmail_path = "/usr/bin/msmtp -C /etc/php7/msmtprc -t" - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(). -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = Off - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = -; Log mail to syslog (Event Log on Windows). -;mail.log = syslog - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -mysqlnd.collect_memory_statistics = Off - -; Records communication from all extensions using mysqlnd to the specified log -; file. -; http://php.net/mysqlnd.debug -;mysqlnd.debug = - -; Defines which queries will be logged. -;mysqlnd.log_mask = 0 - -; Default size of the mysqlnd memory pool, which is used by result sets. -;mysqlnd.mempool_default_size = 16000 - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -;mysqlnd.net_read_buffer_size = 32768 - -; Timeout for network requests in seconds. -;mysqlnd.net_read_timeout = 31536000 - -; SHA-256 Authentication Plugin related. File with the MySQL server public RSA -; key. -;mysqlnd.sha256_server_public_key = - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if -; your OS has problems with many files in one directory, and is -; a more efficient layout for servers that handle many sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -;session.save_path = "/tmp" - -; Whether to use strict session mode. -; Strict session mode does not accept an uninitialized session ID, and -; regenerates the session ID if the browser sends an uninitialized session ID. -; Strict mode protects applications from session fixation via a session adoption -; vulnerability. It is disabled by default for maximum compatibility, but -; enabling it is encouraged. -; https://wiki.php.net/rfc/strict_sessions -session.use_strict_mode = 0 - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the be-all and end-all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it -; inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF) -; Current valid values are "Strict", "Lax" or "None". When using "None", -; make sure to include the quotes, as `none` is interpreted like `false` in ini files. -; https://tools.ietf.org/html/draft-west-first-party-cookies-07 -session.cookie_samesite = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts on each request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 1 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts on each request. -; For high volume production servers, using a value of 1000 is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script is the equivalent of setting -; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 -type f | xargs rm - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users' security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Set session ID character length. This value could be between 22 to 256. -; Shorter length than default is supported only for compatibility reason. -; Users should use 32 or more chars. -; http://php.net/session.sid-length -; Default Value: 32 -; Development Value: 26 -; Production Value: 26 -session.sid_length = 26 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; is special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. tag's action attribute URL will not be modified -; unless it is specified. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=" -; Development Value: "a=href,area=href,frame=src,form=" -; Production Value: "a=href,area=href,frame=src,form=" -; http://php.net/url-rewriter.tags -session.trans_sid_tags = "a=href,area=href,frame=src,form=" - -; URL rewriter does not rewrite absolute URLs by default. -; To enable rewrites for absolute paths, target hosts must be specified -; at RUNTIME. i.e. use ini_set() -; tags is special. PHP will check action attribute's URL regardless -; of session.trans_sid_tags setting. -; If no host is defined, HTTP_HOST will be used for allowed host. -; Example value: php.net,www.php.net,wiki.php.net -; Use "," for multiple hosts. No spaces are allowed. -; Default Value: "" -; Development Value: "" -; Production Value: "" -;session.trans_sid_hosts="" - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.sid_bits_per_character = 5 - -; Enable upload progress tracking in $_SESSION -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.enabled -;session.upload_progress.enabled = On - -; Cleanup the progress information as soon as all POST data has been read -; (i.e. upload completed). -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.cleanup -;session.upload_progress.cleanup = On - -; A prefix used for the upload progress key in $_SESSION -; Default Value: "upload_progress_" -; Development Value: "upload_progress_" -; Production Value: "upload_progress_" -; http://php.net/session.upload-progress.prefix -;session.upload_progress.prefix = "upload_progress_" - -; The index name (concatenated with the prefix) in $_SESSION -; containing the upload progress information -; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" -; http://php.net/session.upload-progress.name -;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" - -; How frequently the upload progress should be updated. -; Given either in percentages (per-file), or in bytes -; Default Value: "1%" -; Development Value: "1%" -; Production Value: "1%" -; http://php.net/session.upload-progress.freq -;session.upload_progress.freq = "1%" - -; The minimum delay between updates, in seconds -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.upload-progress.min-freq -;session.upload_progress.min_freq = "1" - -; Only write session data when session data is changed. Enabled by default. -; http://php.net/session.lazy-write -;session.lazy_write = On - -[Assertion] -; Switch whether to compile assertions at all (to have no overhead at run-time) -; -1: Do not compile at all -; 0: Jump over assertion at run-time -; 1: Execute assertions -; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1) -; Default Value: 1 -; Development Value: 1 -; Production Value: -1 -; http://php.net/zend.assertions -zend.assertions = -1 - -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Throw an AssertionError on failed assertions -; http://php.net/assert.exception -;assert.exception = On - -; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active) -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a component's typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; This affects mb_send_mail() and mbstring.detect_order. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; Use of this INI entry is deprecated, use global internal_encoding instead. -; internal/script encoding. -; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*) -; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. -; The precedence is: default_charset < internal_encoding < iconv.internal_encoding -;mbstring.internal_encoding = - -; Use of this INI entry is deprecated, use global input_encoding instead. -; http input encoding. -; mbstring.encoding_translation = On is needed to use this setting. -; If empty, default_charset or input_encoding or mbstring.input is used. -; The precedence is: default_charset < input_encoding < mbsting.http_input -; http://php.net/mbstring.http-input -;mbstring.http_input = - -; Use of this INI entry is deprecated, use global output_encoding instead. -; http output encoding. -; mb_output_handler must be registered as output buffer to function. -; If empty, default_charset or output_encoding or mbstring.http_output is used. -; The precedence is: default_charset < output_encoding < mbstring.http_output -; To use an output encoding conversion, mbstring's output handler must be set -; otherwise output encoding conversion cannot be performed. -; http://php.net/mbstring.http-output -;mbstring.http_output = - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; "auto" detect order is changed according to mbstring.language -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -; Default: Off -;mbstring.strict_detection = On - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -; This directive specifies maximum stack depth for mbstring regular expressions. It is similar -; to the pcre.recursion_limit for PCRE. -; Default: 100000 -;mbstring.regex_stack_limit=100000 - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 1 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[dba] -;dba.default_handler= - -[opcache] -; Determines if Zend OPCache is enabled -;opcache.enable=1 - -; Determines if Zend OPCache is enabled for the CLI version of PHP -;opcache.enable_cli=0 - -; The OPcache shared memory storage size. -;opcache.memory_consumption=128 - -; The amount of memory for interned strings in Mbytes. -;opcache.interned_strings_buffer=8 - -; The maximum number of keys (scripts) in the OPcache hash table. -; Only numbers between 200 and 1000000 are allowed. -;opcache.max_accelerated_files=10000 - -; The maximum percentage of "wasted" memory until a restart is scheduled. -;opcache.max_wasted_percentage=5 - -; When this directive is enabled, the OPcache appends the current working -; directory to the script key, thus eliminating possible collisions between -; files with the same name (basename). Disabling the directive improves -; performance, but may break existing applications. -;opcache.use_cwd=1 - -; When disabled, you must reset the OPcache manually or restart the -; webserver for changes to the filesystem to take effect. -;opcache.validate_timestamps=1 - -; How often (in seconds) to check file timestamps for changes to the shared -; memory storage allocation. ("1" means validate once per second, but only -; once per request. "0" means always validate) -;opcache.revalidate_freq=2 - -; Enables or disables file search in include_path optimization -;opcache.revalidate_path=0 - -; If disabled, all PHPDoc comments are dropped from the code to reduce the -; size of the optimized code. -;opcache.save_comments=1 - -; Allow file existence override (file_exists, etc.) performance feature. -;opcache.enable_file_override=0 - -; A bitmask, where each bit enables or disables the appropriate OPcache -; passes -;opcache.optimization_level=0x7FFFBFFF - -;opcache.dups_fix=0 - -; The location of the OPcache blacklist file (wildcards allowed). -; Each OPcache blacklist file is a text file that holds the names of files -; that should not be accelerated. The file format is to add each filename -; to a new line. The filename may be a full path or just a file prefix -; (i.e., /var/www/x blacklists all the files and directories in /var/www -; that start with 'x'). Line starting with a ; are ignored (comments). -;opcache.blacklist_filename= - -; Allows exclusion of large files from being cached. By default all files -; are cached. -;opcache.max_file_size=0 - -; Check the cache checksum each N requests. -; The default value of "0" means that the checks are disabled. -;opcache.consistency_checks=0 - -; How long to wait (in seconds) for a scheduled restart to begin if the cache -; is not being accessed. -;opcache.force_restart_timeout=180 - -; OPcache error_log file name. Empty string assumes "stderr". -;opcache.error_log= - -; All OPcache errors go to the Web server log. -; By default, only fatal errors (level 0) or errors (level 1) are logged. -; You can also enable warnings (level 2), info messages (level 3) or -; debug messages (level 4). -;opcache.log_verbosity_level=1 - -; Preferred Shared Memory back-end. Leave empty and let the system decide. -;opcache.preferred_memory_model= - -; Protect the shared memory from unexpected writing during script execution. -; Useful for internal debugging only. -;opcache.protect_memory=0 - -; Allows calling OPcache API functions only from PHP scripts which path is -; started from specified string. The default "" means no restriction -;opcache.restrict_api= - -; Mapping base of shared memory segments (for Windows only). All the PHP -; processes have to map shared memory into the same address space. This -; directive allows to manually fix the "Unable to reattach to base address" -; errors. -;opcache.mmap_base= - -; Enables and sets the second level cache directory. -; It should improve performance when SHM memory is full, at server restart or -; SHM reset. The default "" disables file based caching. -;opcache.file_cache= - -; Enables or disables opcode caching in shared memory. -;opcache.file_cache_only=0 - -; Enables or disables checksum validation when script loaded from file cache. -;opcache.file_cache_consistency_checks=1 - -; Implies opcache.file_cache_only=1 for a certain process that failed to -; reattach to the shared memory (for Windows only). Explicitly enabled file -; cache is required. -;opcache.file_cache_fallback=1 - -; Enables or disables copying of PHP code (text segment) into HUGE PAGES. -; This should improve performance, but requires appropriate OS configuration. -;opcache.huge_code_pages=1 - -; Validate cached file permissions. -;opcache.validate_permission=0 - -; Prevent name collisions in chroot'ed environment. -;opcache.validate_root=0 - -; If specified, it produces opcode dumps for debugging different stages of -; optimizations. -;opcache.opt_debug_level=0 - -[curl] -; A default value for the CURLOPT_CAINFO option. This is required to be an -; absolute path. -;curl.cainfo = - -[openssl] -; The location of a Certificate Authority (CA) file on the local filesystem -; to use when verifying the identity of SSL/TLS peers. Most users should -; not specify a value for this directive as PHP will attempt to use the -; OS-managed cert stores in its absence. If specified, this value may still -; be overridden on a per-stream basis via the "cafile" SSL stream context -; option. -;openssl.cafile= - -; If openssl.cafile is not specified or if the CA file is not found, the -; directory pointed to by openssl.capath is searched for a suitable -; certificate. This value must be a correctly hashed certificate directory. -; Most users should not specify a value for this directive as PHP will -; attempt to use the OS-managed cert stores in its absence. If specified, -; this value may still be overridden on a per-stream basis via the "capath" -; SSL stream context option. -;openssl.capath= - -; Local Variables: -; tab-width: 4 -; End: diff --git a/docker/prova/files/update.sh b/docker/prova/files/update.sh deleted file mode 100755 index e4ee40c..0000000 --- a/docker/prova/files/update.sh +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/sh -BASEDIR=$(dirname "$0") -cd "$BASEDIR/MastodonStartpage" -git pull -cd .. -rsync -av --filter "protect mustard/crawler/peers" --filter "protect mustard/sec/mustard.ini" --delete-after MastodonStartpage/web/ /var/www/localhost/htdocs/ diff --git a/mastblocksdump/blacklist_bida.txt b/mastblocksdump/blacklist_bida.txt deleted file mode 100644 index c57eb5e..0000000 --- a/mastblocksdump/blacklist_bida.txt +++ /dev/null @@ -1,36 +0,0 @@ -anitwitter.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -anitwitter.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -babymetal.party 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -baraag.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -bsd.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f https://mastodon.bida.im/@Ca_Gi/101270762003908554 -ediot.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -freespeechextremist.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -freespeech.firedragonstudios.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f https://mastodon.bida.im/@Ca_Gi/101344114624456297 -freezepeach.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -gorf.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -gs.smuglo.li 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -humblr.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 0 f f https://mastodon.bida.im/@cirku17/101399587014096355 -ika.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -mastodon.starrevolution.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f https://a.nom.pl/notice/450131 -mobile.co 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f https://mastodon.bida.im/@Ca_Gi/101355947506820592 -neckbeard.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f Instance "suspended": neckbeard.xyz - anime nazi shit, irony bro admin -newjack.city 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -noagendasocial.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 0 f f -pawoo.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -pl.smuglo.li 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -porntoot.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 0 f f -preteengirls.biz 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -quodverum.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f https://mastodon.bida.im/@Ca_Gi/101514801964087604 -sealion.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 0 f f -shitposter.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 0 f f -shitposter.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f https://mastodon.bida.im/@Ca_Gi/101270762003908554 -social.au2pb.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -social.heldscal.la 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -social.imirhil.fr 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -social.quodverum.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f Razz"isti -social.targaryen.house 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 0 f f -switter.at 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 0 f f https://mastodon.bida.im/@jops/101404791975700441 -toot.love 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 0 f f -unsafe.space 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -woofer.alfter.us 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f -wrongthink.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f diff --git a/mastblocksdump/blacklist_cagi.txt b/mastblocksdump/blacklist_cagi.txt deleted file mode 100644 index e5f87a0..0000000 --- a/mastblocksdump/blacklist_cagi.txt +++ /dev/null @@ -1,158 +0,0 @@ -2.distsn.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Spam -2hu.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -anitwitter.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -anitwitter.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -ap.torlipen.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -ap.uwu.st 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Harassment or abuse -babymetal.party 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -baraag.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -beehub.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -blob.cat 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -bodybuilding.im 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -bofa.lol 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -bsd.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -carnal-gabhub.protohype.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -civiq.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -cofe.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -comm.network 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -community.halle-leaks.de 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -community.highlandarrow.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -counter.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -cryzed.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -cyzed.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -daffodil-11.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f "Malicious" 'site' -dev.civiq.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -develop.gab.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -dickshow.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -djitter.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -ediot.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f Fascism – Hatespeech -ediot.socialsilence 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -ekrem.develop.gab.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -exited.eu 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -explosion.party 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Conspiracy theories -fedichive.tk 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -feminism.lgbt 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -freefedifollowers.ga 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -freehold.earth 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -freespeechextremist.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -freespeech.firedragonstudios.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -freespeech.host 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -freevoice.space 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f Fascism – Hatespeech -freezepeach.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gab.ai 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gabble.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gab.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gabfed.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gab.io 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gab.polaris-1.work 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gab.protohype.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gab.sleek.eu 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gameliberty.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -gasthe.lgbt 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gnusocial.no 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -goldandblack.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gorf.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f Fascism – Hatespeech -gorf.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -gs.archae.me 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gs.kawa-kun.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gs.mon5t3r.info 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -gs.smuglo.li 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -hakui.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -homura.space 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Harassment or abuse -ika.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -impeccable.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -inditoot.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -jabb.in 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Conspiracy theories -juche.town 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -karolat.press 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -kawaiistu.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -kawen.space 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -kazvam.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -kipper.im 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -kiwifarms.cc 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -kneegrows.top 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -kowai.youkai.town 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -kyot.me 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -liberdon.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -libertarianism.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -libre.tube 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -loli.estate 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -lolis.world 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -manx.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -mastodon.loliandstuff.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -mastodon.starrevolution.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -mast.wholemars.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -melalandia.tk 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -me.nooruul.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -mobile.co 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -neckbeard.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -neenster.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -newjack.city 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Spam -niu.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -noagendasocial.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f Fascism – Hatespeech -not-develop.gab.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -not.phrack.fyi 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Conspiracy theories -npf.mlpol.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -pawoo.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -pleroma.cucked.me 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -pleroma.rareome.ga 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Malicious site -pleroma.soykaf.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -pleroma.wolfie.pw 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -pleroma.yorha.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Harassment or abuse -pleville.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -pl.smuglo.li 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -porntoot.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -preteen.biz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -preteengirls.bi 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -preteengirls.biz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -pridelands.io 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -qoto.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -quey.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -quitter.pw 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -quodverum.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -rainbowdash.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -rapefeminists.network 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -sealion.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -shitasstits.life 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -shitposter.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -social.allthefallen.ninja 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -social.au2pb.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -social.guizzyordi.info 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -social.heldscal.la 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -social.hidamari.blue 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -social.homunyan.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -social.i2p.rocks 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -social.imirhil.fr 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -social.louisoft01.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Conspiracy theories -social.lucci.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Conspiracy theories -social.quodverum.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -social.raptorengineering.io 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Advertisement -social.sunshinegardens.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Harassment or abuse -social.super-niche.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -social.targaryen.house 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f Fascism – Hatespeech -social.wiuwiu.de 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -socnet.supes.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -spinster.dev 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -spinster.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -sunshinegardens.org 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Harassment or abuse -thechad.zone 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -the.hedgehoghunter.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -toot.love 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Bad Moderation -unsafe.space 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f Fascism – Hatespeech -vampire.estate 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -video.halle-leaks.de 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f -vipgirlfriend.xxx 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Unflagged porn -voluntaryism.club 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -wagesofsinisdeath.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -waifu.social 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -warc.space 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -weeaboo.space 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -weedis.life 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f -wogan.im 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -woofer.alfter.us 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -wrongthink.net 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 0 f f Fascism – Hatespeech -wxw.moe 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -yiff.rocks 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Harassment or abuse -youkai.town 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Pedo – Loli -zerohack.xyz 2019-12-11 18:44:05.111111 2019-12-11 18:44:06.710862 1 f f Fascism – Hatespeech -social.quodverum.com 2019-12-11 18:44:05.111111 2019-12-11 18:44:05.111111 1 f f Razz"isti diff --git a/mastblocksdump/blacklists b/mastblocksdump/blacklists deleted file mode 100644 index a6fe1e5..0000000 --- a/mastblocksdump/blacklists +++ /dev/null @@ -1,2 +0,0 @@ -blacklist_bida.txt -blacklist_cagi.txt diff --git a/mastblocksdump/istanzesorelle b/mastblocksdump/istanzesorelle deleted file mode 100644 index bd30b8d..0000000 --- a/mastblocksdump/istanzesorelle +++ /dev/null @@ -1,5 +0,0 @@ -mastodon.bida.im -mastodon.cisti.org -nebbia.fail -stereodon.social -snapj.saja.freemyip.com diff --git a/mastblocksdump/mastblocksdump.sh b/mastblocksdump/mastblocksdump.sh deleted file mode 100755 index a29093e..0000000 --- a/mastblocksdump/mastblocksdump.sh +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/sh - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -MASTHOME='/var/lib/mastodon' -MASTENVFP="$MASTHOME/live/.env.production" -DOMBLOCKSFP="$MASTHOME/live/public/domain_blocks.txt" - -HELP="SINTASSI - mastblocksdump.sh [opzioni] -DESCRIZIONE - Questo script rimedia all'attuale mancanza, in mastodon, di un endpoint - dell'API che ritorni una lista dei domini bloccati da un'istanza in un - formato univoco e parsabile. Legge i dati necessari alla connessione al - db di mastodon dal file di configurazione di mastodon, per default - \"$MASTENVFP\" - poi esegue tramite psql una query sulla tabella domain_blocks - e ne salva i risultati in un file di testo, per default - \"$DOMBLOCKSFP\" - che sarà accessibile da \"https://[dominio]/domain_blocks.txt\". - È pensato per essere eseguito periodicamente da un cron job, come - utente mastodon oppure root oppure altro utente che abbia accesso in - lettura al file di configurazione di mastodon e in scrittura a quello - in cui scrivere la lista delle istanze bloccate. -OPZIONI - -H, --home - Definisce la home di mastodon (per default \"$MASTHOME\") - e di conseguenza il percorso del suo file di configurazione - (per default \"$MASTENVFP\") e del file - in cui scrivere la lista delle istanze bloccate (per default - \"$DOMBLOCKSFP\"). - È comunque possibile specificare individualmente il percorso - del file di configurazione di mastodon e di quello in cui scrivere - la lista delle istanze bloccate con le due opzioni che seguono. - -e, --envfp - Definisce il percorso del file di configurazione di mastodon in uso. - -b, --blocksfp - Definisce il percorso del file in cui scrivere la lista delle istanze - bloccate. - -h, --help - Mostra questo aiuto ed esce." - -args=("$@") -i=0 -while [ $i -lt ${#args[@]} ]; do - if [ "${args[$i]:0:1}" == "-" ]; then - case "${args[$i]}" in - "-H" | "--home" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - MASTHOME=$(echo "${args[$i]}" | sed -e 's/\/$//') - MASTENVFP="$MASTHOME/live/.env.production" - DOMBLOCKSFP="$MASTHOME/live/public/domain_blocks.txt" - fi - ;; - "-e" | "--envfp" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - MASTENVFP="${args[$i]}" - fi - ;; - "-b" | "--blocksfp" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - DOMBLOCKSFP="${args[$i]}" - fi - ;; - "-h" | "--help" ) - echo "$HELP" - exit 0 - ;; - *) - echo "\"${args[$i]}\": opzione sconosciuta (usa \"-h\" per l'aiuto)." - exit 1 - ;; - esac - else - echo "\"${args[$i]}\": opzione sconosciuta (usa \"-h\" per l'aiuto)." - exit 1 - fi - ((i++)) -done - -[ ! -e "$MASTENVFP" ] && echo "\"$MASTENVFP\" non esiste, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -f "$MASTENVFP" ] && echo "\"$MASTENVFP\" non è un file, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -r "$MASTENVFP" ] && echo "\"$MASTENVFP\" non è leggibile, muoio (usa \"-h\" per l'aiuto)." && exit 1 - -DB_HOST=`grep 'DB_HOST' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_PORT=`grep 'DB_PORT' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_NAME=`grep 'DB_NAME' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_USER=`grep 'DB_USER' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_PASS=`grep 'DB_PASS' "$MASTENVFP"|sed -e 's/[^=]*=//'` - -touch "$DOMBLOCKSFP" 2>/dev/null -[ ! $? -eq 0 ] && echo "Non posso creare/modificare il file \"$DOMBLOCKSFP\", muoio (usa \"-h\" per l'aiuto)." && exit 1 - -echo "# generato $(date -u)" > "$DOMBLOCKSFP" -echo "# formato di output: dominio bloccato[tab]data creazione blocco[tab]data ultima modifica blocco[tab]tipo blocco[tab]rifiuto media[tab]rifiuto reports[tab]commento pubblico" >> "$DOMBLOCKSFP" -echo "# \"tipo blocco\" può essere 0=silenziato, 1=sospeso, 2=nessuno (solo, eventualmente, rifiuto media e reports)" >> "$DOMBLOCKSFP" - -PGPASSWORD="$DB_PASS" psql -h "$DB_HOST" -p "$DB_PORT" -d "$DB_NAME" -U "$DB_USER" -c 'SELECT domain, created_at, updated_at, severity, reject_media, reject_reports, public_comment FROM domain_blocks' -A -t -F $'\t' >> "$DOMBLOCKSFP" diff --git a/mastblocksdump/mastblocksmerge.sh b/mastblocksdump/mastblocksmerge.sh deleted file mode 100755 index 3fcfc66..0000000 --- a/mastblocksdump/mastblocksmerge.sh +++ /dev/null @@ -1,168 +0,0 @@ -#!/bin/bash - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -MASTHOME='/var/lib/mastodon' -MASTENVFP="$MASTHOME/live/.env.production" -SISTERSFP="istanzesorelle" -INTERACTIVE=0 - -HELP="SINTASSI - mastblocksmerge.sh [opzioni] -DESCRIZIONE - Questo script integra i dati di una o più blocklist esterne nella - tabella domain_blocks di mastodon. - Legge i domini delle istanze di cui recuperare la blocklist da un file, - per default \"$SISTERSP\" (formato del file: un dominio per riga), - prova a recuperare ciascuna blocklist da - https://[dominio]/domain_blocks.txt, costruisce dalle liste recuperate - un\'unica lista senza duplicati, si collega al db di mastodon e scrive - nella tabella domain_blocks i dati relativi alle istanze bloccate che - non sono già presenti nella tabella stessa. - Per la connessione al db di mastodon legge i dati necessari dal file - di configurazione di mastodon, per default - \"$MASTENVFP\" - È pensato per essere eseguito periodicamente da un cron job, come - utente mastodon oppure root oppure altro utente che abbia accesso in - lettura al file di configurazione di mastodon. -OPZIONI - -H, --home - Definisce la home di mastodon (per default \"$MASTHOME\") - e di conseguenza il percorso del suo file di configurazione - (per default \"$MASTENVFP\"). - È comunque possibile specificare individualmente il percorso - del file di configurazione di mastodon con l\'opzione che segue. - -e, --envfp - Definisce il percorso del file di configurazione di mastodon in uso. - -s, --sistersfp - Definisce il percorso del file da cui leggere la lista delle istanze - sorelle. - -i, --interactive - Modalità interattiva: se vengono nelle blocklist vengono trovate - istanze ancora non presenti nel database di mastodon, viene chiesto - per ciascuna se aggiungerla o meno. - -h, --help - Mostra questo aiuto ed esce." - -args=("$@") -i=0 -while [ $i -lt ${#args[@]} ]; do - if [ "${args[$i]:0:1}" == "-" ]; then - case "${args[$i]}" in - "-H" | "--home" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - MASTHOME=$(echo "${args[$i]}" | sed -e 's/\/$//') - MASTENVFP="$MASTHOME/live/.env.production" - fi - ;; - "-e" | "--envfp" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - MASTENVFP="${args[$i]}" - fi - ;; - "-s" | "--sistersfp" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - SISTERSFP="${args[$i]}" - fi - ;; - "-i" | "--interactive" ) - INTERACTIVE=1 - ;; - "-h" | "--help" ) - echo "$HELP" - exit 0 - ;; - *) - echo "\"${args[$i]}\": opzione sconosciuta (usa \"-h\" per l'aiuto)." - exit 1 - ;; - esac - else - echo "\"${args[$i]}\": opzione sconosciuta (usa \"-h\" per l'aiuto)." - exit 1 - fi - ((i++)) -done - -[ ! -e "$MASTENVFP" ] && echo "\"$MASTENVFP\" non esiste, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -f "$MASTENVFP" ] && echo "\"$MASTENVFP\" non è un file, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -r "$MASTENVFP" ] && echo "\"$MASTENVFP\" non è leggibile, muoio (usa \"-h\" per l'aiuto)." && exit 1 - -[ ! -e "$SISTERSFP" ] && echo "\"$SISTERSFP\" non esiste, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -f "$SISTERSFP" ] && echo "\"$SISTERSFP\" non è un file, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -r "$SISTERSFP" ] && echo "\"$SISTERSFP\" non è leggibile, muoio (usa \"-h\" per l'aiuto)." && exit 1 - -DB_HOST=`grep 'DB_HOST' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_PORT=`grep 'DB_PORT' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_NAME=`grep 'DB_NAME' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_USER=`grep 'DB_USER' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_PASS=`grep 'DB_PASS' "$MASTENVFP"|sed -e 's/[^=]*=//'` - -IFS=$'\n' - -for sisdom in $(grep -P '^[^#]+[^\s]+' "$SISTERSFP"); do - blocks="$(curl -s "https://$sisdom/domain_blocks.txt" | grep -P '^[^#]+[^\s]+')" -# blocks=$(cat "$sisdom" | grep -P '^[^#]+[^\s]+') - for line in $blocks; do - echo "$allblocks"|grep -F "$line" &>/dev/null - if [ $? -ne 0 ]; then - dom=$(echo "$line" | sed -e 's/\t.*//' -e 's/\./\\./g') - echo "$allblocks" | grep -P "^$dom\t" &>/dev/null - [ $? -ne 0 ] && allblocks+="$line$IFS" - fi - done -done -allblocks=$(echo "$allblocks" | head -n -1 | sort) - -blocks=$(PGPASSWORD="$DB_PASS" psql -h "$DB_HOST" -p "$DB_PORT" -d "$DB_NAME" -U "$DB_USER" -c 'SELECT domain, updated_at, severity, public_comment FROM domain_blocks' -A -t -F $'\t') - -i=0 -for line in $allblocks; do - dom=$(echo "$line" | sed -e 's/\t.*//' -e 's/\./\\./g') - echo "$blocks" | grep -P "^$dom\t" &>/dev/null - [ $? -ne 0 ] && newblocks+="$line$IFS" && ((i++)) -done -newblocks=$(echo "$newblocks" | head -n -1 | sort) - -[ $i -eq 0 ] && echo "Non ho trovato nessuna nuova istanza bloccata." && exit 0 - -echo "Ho trovato $i istanza/e bloccata da aggiungere." - -if [ $INTERACTIVE -eq 1 ]; then - for line in $newblocks; do - echo "$line" - ask=1 - while [ $ask -eq 1 ]; do - read -p "Vuoi aggiungere questa istanza alla tabella delle istanze bloccate? [S/n] " inp - echo "$inp" | grep -P '^[sSnN]{0,1}$' &>/dev/null - [ $? -eq 0 ] && ask=0 - done - if [ "$inp" == "" ] || [ "$inp" == "s" ] || [ "$inp" == "S" ]; then - buf+="$line$IFS" - fi - done - newblocks=$(echo "$buf" | head -n -1) -fi - -echo "$newblocks" | PGPASSWORD="$DB_PASS" psql -h "$DB_HOST" -p "$DB_PORT" -d "$DB_NAME" -U "$DB_USER" -A -t -c "COPY domain_blocks ( domain, created_at, updated_at, severity, reject_media, reject_reports, public_comment ) FROM STDIN WITH ( FORMAT text, DELIMITER ' ' )" diff --git a/mastblocksdump/mastblocksmerge.wip.sh b/mastblocksdump/mastblocksmerge.wip.sh deleted file mode 100755 index f1bbbac..0000000 --- a/mastblocksdump/mastblocksmerge.wip.sh +++ /dev/null @@ -1,237 +0,0 @@ -#!/bin/bash - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -MASTHOME='/var/lib/mastodon' -MASTENVFP="$MASTHOME/live/.env.production" -SISTERSFP="istanzesorelle" -LOCAL=0 -INTERACTIVE=0 - -HELP="SINTASSI - mastblocksmerge.sh [opzioni] -DESCRIZIONE - Questo script integra i dati di una o più blocklist esterne nella - tabella domain_blocks di mastodon. - Legge i domini delle istanze di cui recuperare la blocklist da un file - di inizializzazione, per default \"$SISTERSP\" (formato del file: - un dominio per riga), prova a recuperare ciascuna blocklist da - https://[dominio]/domain_blocks.txt, costruisce dalle liste recuperate - un\'unica lista senza duplicati, si collega al db di mastodon e scrive - nella tabella domain_blocks i dati relativi alle istanze bloccate che - non sono già presenti nella tabella stessa. - Per la connessione al db di mastodon legge i dati necessari dal file - di configurazione di mastodon, per default - \"$MASTENVFP\" - È pensato per essere eseguito periodicamente da un cron job, come - utente mastodon oppure root oppure altro utente che abbia accesso in - lettura al file di configurazione di mastodon. -OPZIONI - -H, --home - Definisce la home di mastodon (per default \"$MASTHOME\") - e di conseguenza il percorso del suo file di configurazione - (per default \"$MASTENVFP\"). - È comunque possibile specificare individualmente il percorso - del file di configurazione di mastodon con l\'opzione che segue. - -e, --envfp - Definisce il percorso del file di configurazione di mastodon in uso. - -s, --sistersfp - Definisce il percorso del file di inizializzazione da cui leggere - la lista dei domini delle istanze sorelle. - -l, --local - Interpreta il file di inizializzazione come lista di file locali - contenenti blacklist (formato: un file per riga). - -i, --interactive - Modalità interattiva: se vengono nelle blocklist vengono trovate - istanze ancora non presenti nel database di mastodon, viene chiesto - per ciascuna se aggiungerla o meno. - -h, --help - Mostra questo aiuto ed esce." - -args=("$@") -i=0 -while [ $i -lt ${#args[@]} ]; do - if [ "${args[$i]:0:1}" == "-" ]; then - case "${args[$i]}" in - "-H" | "--home" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - MASTHOME=$(echo "${args[$i]}" | sed -e 's/\/$//') - MASTENVFP="$MASTHOME/live/.env.production" - fi - ;; - "-e" | "--envfp" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - MASTENVFP="${args[$i]}" - fi - ;; - "-s" | "--sistersfp" ) - if [ -z "${args[$i+1]}" ]; then - echo "L'opzione \"${args[$i]}\" richiede un parametro (usa \"-h\" per l'aiuto)." - exit 1 - else - ((i++)) - SISTERSFP="${args[$i]}" - fi - ;; - "-l" | "--local" ) - LOCAL=1 - ;; - "-i" | "--interactive" ) - INTERACTIVE=1 - ;; - "-h" | "--help" ) - echo "$HELP" - exit 0 - ;; - *) - echo "\"${args[$i]}\": opzione sconosciuta (usa \"-h\" per l'aiuto)." - exit 1 - ;; - esac - else - echo "\"${args[$i]}\": opzione sconosciuta (usa \"-h\" per l'aiuto)." - exit 1 - fi - ((i++)) -done - -[ ! -e "$MASTENVFP" ] && echo "\"$MASTENVFP\" non esiste, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -f "$MASTENVFP" ] && echo "\"$MASTENVFP\" non è un file, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -r "$MASTENVFP" ] && echo "\"$MASTENVFP\" non è leggibile, muoio (usa \"-h\" per l'aiuto)." && exit 1 - -[ ! -e "$SISTERSFP" ] && echo "\"$SISTERSFP\" non esiste, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -f "$SISTERSFP" ] && echo "\"$SISTERSFP\" non è un file, muoio (usa \"-h\" per l'aiuto)." && exit 1 -[ ! -r "$SISTERSFP" ] && echo "\"$SISTERSFP\" non è leggibile, muoio (usa \"-h\" per l'aiuto)." && exit 1 - -DB_HOST=`grep 'DB_HOST' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_PORT=`grep 'DB_PORT' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_NAME=`grep 'DB_NAME' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_USER=`grep 'DB_USER' "$MASTENVFP"|sed -e 's/[^=]*=//'` -DB_PASS=`grep 'DB_PASS' "$MASTENVFP"|sed -e 's/[^=]*=//'` - -IFS=$'\n' - -function decode { - #dominio - record[0]=$(echo "$1" | sed -e 's/\t.*//') - #data creazione - record[1]=$(echo "$1" | sed -e 's/^[^\t]*\t\([^\t]*\).*/\1/') - #data ultima modifica - record[2]=$(echo "$1" | sed -e 's/^[^\t]*\t[^\t]*\t\([^\t]*\).*/\1/') - #tipo di blocco - record[3]=$(echo "$1" | sed -e 's/^[^\t]*\t[^\t]*\t[^\t]*\t\([^\t]*\).*/\1/') - #rifiuto media - record[4]=$(echo "$1" | sed -e 's/^[^\t]*\t[^\t]*\t[^\t]*\t[^\t]*\t\([^\t]*\).*/\1/') - #rifiuto reports - record[5]=$(echo "$1" | sed -e 's/^[^\t]*\t[^\t]*\t[^\t]*\t[^\t]*\t[^\t]*\t\([^\t]*\).*/\1/') - #commento pubblico - record[6]=$(echo "$1" | sed -e 's/^[^\t]*\t[^\t]*\t[^\t]*\t[^\t]*\t[^\t]*\t[^\t]*\t\([^\t]*\).*/\1/') - if [ "${record[4]}" == "f" ]; then - record[4]="No" - elif [ "${record[4]}" == "t" ]; then - record[4]="Si" - fi - if [ "${record[5]}" == "f" ]; then - record[5]="No" - elif [ "${record[5]}" == "t" ]; then - record[5]="Si" - fi - if [ "${record[3]}" == "0" ]; then - record[3]="Silenziata" - elif [ "${record[3]}" == "1" ]; then - record[3]="Sospesa" - elif [ "${record[3]}" == "2" ]; then - record[3]="Nessuno" - fi -} - -for sisdom in $(grep -P '^[^#]+[^\s]+' "$SISTERSFP"); do - if [ $LOCAL -eq 0 ]; then - blocks+="$(curl --connect-timeout 3 -s "https://$sisdom/domain_blocks.txt" | grep -P '^[^#]+[^\s]+')$IFS" - else - blocks+="$(cat "$sisdom" | grep -P '^[^#]+[^\s]+')$IFS" - fi -done -blocks=$(echo "$blocks" | head -n -1 | sort -u) -echo "$blocks" -echo "~~~~~~~~~~~~~~~~~~~~" -okblocks='' -for line in $blocks; do - dom=$(echo "$line" | sed -e 's/\t.*//' -e 's/\./\\./g') - echo "$okblocks" | grep -P "^$dom\t" - if [ $? -ne 0 ]; then - entries=$(echo "$blocks" | grep -P "^$dom\t") - howmany=$(echo "$entries" | wc -l) - if [ $howmany -gt 1 ]; then - if [ $INTERACTIVE -eq 1 ]; then - i=0 - for entry in $entries; do - ((i++)) - echo "$i: $entry" - done - read - else - # qui ci vorrebbe codice "intelligente" che sceglie la entry più recente, ma per ora così - okblocks+="$line$IFS" - fi - fi - fi -done -okblocks=$(echo "$okblocks" | head -n -1 | sort) -echo "$okblocks" -echo "~~~~~~~~~~~~~~~~~~~~" - -exit - - - - -blocks=$(PGPASSWORD="$DB_PASS" psql -h "$DB_HOST" -p "$DB_PORT" -d "$DB_NAME" -U "$DB_USER" -c 'SELECT domain, updated_at, severity, public_comment FROM domain_blocks' -A -t -F $'\t') - -i=0 -for line in $allblocks; do - dom=$(echo "$line" | sed -e 's/\t.*//' -e 's/\./\\./g') - echo "$blocks" | grep -P "^$dom\t" &>/dev/null - [ $? -ne 0 ] && newblocks+="$line$IFS" && ((i++)) -done -newblocks=$(echo "$newblocks" | head -n -1 | sort) - -[ $i -eq 0 ] && echo "Non ho trovato nessuna nuova istanza bloccata." && exit 0 - -echo "Ho trovato $i istanza/e bloccata da aggiungere." - -if [ $INTERACTIVE -eq 1 ]; then - for line in $newblocks; do - decode "$line" - echo "Dominio: ${record[0]}; Data creaz.: ${record[1]}; Data ult. mod.: ${record[2]}; Tipo blocco: ${record[3]}; Rifiuto media: ${record[4]}; Rifiuto reports: ${record[5]}; Commento pub.: ${record[6]}" - ask=1 - while [ $ask -eq 1 ]; do - read -p "Vuoi aggiungere questa istanza alla tabella delle istanze bloccate? [S/n] " inp - echo "$inp" | grep -P '^[sSnN]{0,1}$' &>/dev/null - [ $? -eq 0 ] && ask=0 - done - if [ "$inp" == "" ] || [ "$inp" == "s" ] || [ "$inp" == "S" ]; then - buf+="$line$IFS" - fi - done - newblocks=$(echo "$buf" | head -n -1) -fi - -echo "$newblocks" | PGPASSWORD="$DB_PASS" psql -h "$DB_HOST" -p "$DB_PORT" -d "$DB_NAME" -U "$DB_USER" -A -t -c "COPY domain_blocks ( domain, created_at, updated_at, severity, reject_media, reject_reports, public_comment ) FROM STDIN WITH ( FORMAT text, DELIMITER ' ' )" diff --git a/mastblocksdump/php/domblocks.php b/mastblocksdump/php/domblocks.php deleted file mode 100644 index 8fc6311..0000000 --- a/mastblocksdump/php/domblocks.php +++ /dev/null @@ -1,38 +0,0 @@ -null, - 'DB_PORT'=>null, - 'DB_NAME'=>null, - 'DB_USER'=>null, - 'DB_PASS'=>null -); - -$confa=file($conffp,FILE_IGNORE_NEW_LINES|FILE_SKIP_EMPTY_LINES); - -foreach ($confa as $line) { - if (preg_match('/^([A-Z_]+)=(.*)$/',$line,$buf)===1 && array_key_exists($buf[1],$conf)) - $conf[$buf[1]]=$buf[2]; -} - -$dbconn=pg_connect('host='.$conf['DB_HOST'].' port='.$conf['DB_PORT'].' dbname='.$conf['DB_NAME'].' user='.$conf['DB_USER'].' password='.$conf['DB_PASS']) - or die('Connessione fallita: '.pg_last_error()); - -$res=pg_query('SELECT domain, created_at, updated_at, severity, reject_media, reject_reports, public_comment FROM domain_blocks') - or die('Query fallita: '.pg_last_error()); - -while ($row=pg_fetch_assoc($res)) - $domblocks[]=$row; - -pg_free_result($res); -pg_close($dbconn); - -echo(json_encode($domblocks)); - -exit(0); - -?>