syslogd with circular buffer

Blallo 0dc1188701 Ignore build/ 5 years ago
cmd 86d719949e FIX #5 safer default paths for sockets: /tmp/ 5 years ago
data 2e1ab137ea Better tests for data 5 years ago
docs f7caefdae1 Document socket activation. 5 years ago
filtering ec3934501a filtering based on reader-Messages 5 years ago
formatter 55827916bb Add flag to set syslog format. 5 years ago
vendor b0cd779d61 Supports datagram socket activation 5 years ago
.dockerignore 65950687ed Added development dockerfile. 5 years ago
.drone.yml 5b7ddb62a6 drone CI 6 years ago
.gitignore 0dc1188701 Ignore build/ 5 years ago
.gitmodules da813a3fd5 Vendoring go-syslog to accommodate not yet merged PR. 5 years ago
Dockerfile 65950687ed Added development dockerfile. 5 years ago
README.md 4b9e645713 Dockerfile documented in the README. 5 years ago
hub.go ec3934501a filtering based on reader-Messages 5 years ago
hub_test.go c5eee0ea22 Fix hub tests. 5 years ago
release.sh bc2a197192 release.sh makes everything for a release 5 years ago

README.md

A syslog daemon implementing circular buffer, in-memory storage.

This is useful when you want to keep some (heavily detailed) log available, but you don't want to log too many things to disk. Remember: logging is useful, but can be dangerous to your users' privacy!

On your "main" syslog, forward (part of the) messages to this one!

Integration examples

In these examples I'll refer to the usage of UNIX sockets. They are more secure than TCP/UDP sockets because they have file permissions, they can be "masked" using mount namespaces, etc. However, circlogd supports udp/tcp sockets easily, so that should not be an issue.

syslog-ng

To integrate into syslog-ng, put this in /etc/syslog-ng/conf.d/circolog.conf

destination d_circolog {
        unix-dgram("/run/circolog-syslog.sock"
                   flags(syslog-protocol)
                  );
};
log { source(s_src); destination(d_circolog); };

and run circologd -syslogd-socket /run/circolog-syslog.sock -query-socket /run/circolog-query.sock

Client

circolog has its own client: circolog-tail. It is intended to resemble tail -f for the most basic options; however, it will include filtering options that are common when you want to read logs, because that's very easy when you have structured logs available.

However, one design point of circolog is to be usable without having a specific client: so the logs are offered on both HTTP and websocket. This means that you can use curl if you want:

curl --unix-socket /run/circolog-query.sock localhost/

will give you everything that circologd has in memory.

If you want to "follow" (as in tail -f) you need to use the websocket interface. However, I don't know of any websocket client supporting UNIX domain socket, so you have two options:

  1. Use circolog-tail
  2. Use circologd with -query-addr 127.0.0.1:9080, add some iptables rule to prevent non-root to access that port, and run ws ws://localhost:9080/ws. You'll get all the "backlog", and will follow new log messages.

HTTP URLs and parameters

When using HTTP, logs are served on /. Valid parameters are:

  • l. This is the amount of lines to send. This is essentially the same as the -n parameter on tail Using l=-1 (the default) means "give me every log message that you have
  • fmt. This selects the output format. When fmt=json is used, each message is returned as JSON structured data. The format of those JSON messages is still unstable. fmt=syslog, the default, outputs messages using "syslog style" (RFC XXXXXX)

To use websocket, request path /ws. The same parameters of / are recognized.

Control daemon

Circologd can be controlled, on some aspects, at run-time. It has 2 mechanisms for that: the easiest, and more limited, is sending a signal with kill; the second, and more powerful, is a control socket, where you can give commands to it. This control socket is just HTTP, so again curl is your friend. In the future a circolog-ctl client will be developed.

Pause

When circologd is paused, every new message it receives is immediately discarded. No exception. The backlog is, however, preserved. This means that you can trigger the event that you want to investigate, pause circolog, then analyze the logs. Pausing might be the easiest way to make circologd only run "when needed".

When circologd resumes, no previous message is lost.

To pause/unpause:

  • circologctl pause
  • pkill -USR1 circologd
  • POST /pause/toggle to your circologd control socket

Clear

When you clear the circologd's buffer, it will discard every message it has, but will keep collecting new messages.

You can do that with POST /logs/clear

Filter

circologd can drop irrelevant messages using filters. A filter is a sql-like expression (for the exact syntax you can see the doc for the underlying library, qlbridge), but just imitating sql where clauses can be enough!

circologctl filter message NOT LIKE '%usb%' will discard everything related to usb.

The filter will be applied to incoming messages, so messages mentioning usb will not be saved in memory at all.

You can put zero or one filters at a time. That is, you can not stack more filters... but FilterQL syntax supports AND operators, so this is not an issue.

To remove filtering (thus accepting every message) run circologctl filter

NOTE: circolog-tail supports filters with exactly the same syntax, but they are two different kinds of filtering: one is server-side, the other is client-side. When you filter server-side with circologctl filter, circologd will refuse messages not matching the filter. If you only filter with circolog-tail, the message you are filtering out will still consume space in memory (and will be available to other clients).

Filtering brings big dependencies, which will add some 5-6 megabytes to circolog binaries. If you want to avoid it, install with go install -tags nofilter git.lattuga.net/boyska/circolog/... and your binaries will be a bit smaller.

Develop

To tinker with circolog, there is also a Dockerfile. Simply:

$ docker build -t circolog .
$ docker run -t circolog