gadget-kspconsole/stm32-hal/include/stm32f7xx_hal_flash.h

427 lines
15 KiB
C
Raw Permalink Normal View History

2023-11-27 15:13:55 +01:00
/**
******************************************************************************
* @file stm32f7xx_hal_flash.h
* @author MCD Application Team
* @version V1.2.0
* @date 30-December-2016
* @brief Header file of FLASH HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_HAL_FLASH_H
#define __STM32F7xx_HAL_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal_def.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Types FLASH Exported Types
* @{
*/
/**
* @brief FLASH Procedure structure definition
*/
typedef enum
{
FLASH_PROC_NONE = 0U,
FLASH_PROC_SECTERASE,
FLASH_PROC_MASSERASE,
FLASH_PROC_PROGRAM
} FLASH_ProcedureTypeDef;
/**
* @brief FLASH handle Structure definition
*/
typedef struct
{
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
__IO uint32_t NbSectorsToErase; /* Internal variable to save the remaining sectors to erase in IT context */
__IO uint8_t VoltageForErase; /* Internal variable to provide voltage range selected by user in IT context */
__IO uint32_t Sector; /* Internal variable to define the current sector which is erasing */
__IO uint32_t Address; /* Internal variable to save address selected for program */
HAL_LockTypeDef Lock; /* FLASH locking object */
__IO uint32_t ErrorCode; /* FLASH error code */
}FLASH_ProcessTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASH_Error_Code FLASH Error Code
* @brief FLASH Error Code
* @{
*/
#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
#define HAL_FLASH_ERROR_ERS ((uint32_t)0x00000002U) /*!< Programming Sequence error */
#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004U) /*!< Programming Parallelism error */
#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008U) /*!< Programming Alignment error */
#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010U) /*!< Write protection error */
#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020U) /*!< Operation Error */
#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000040U) /*!< Read Protection Error */
/**
* @}
*/
/** @defgroup FLASH_Type_Program FLASH Type Program
* @{
*/
#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00U) /*!< Program byte (8-bit) at a specified address */
#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01U) /*!< Program a half-word (16-bit) at a specified address */
#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02U) /*!< Program a word (32-bit) at a specified address */
#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03U) /*!< Program a double word (64-bit) at a specified address */
/**
* @}
*/
/** @defgroup FLASH_Flag_definition FLASH Flag definition
* @brief Flag definition
* @{
*/
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH operation Error flag */
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
#define FLASH_FLAG_ERSERR FLASH_SR_ERSERR /*!< FLASH Erasing Sequence error flag */
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
#if defined (FLASH_OPTCR2_PCROP)
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH Read protection error flag */
#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR | FLASH_FLAG_RDERR)
#else
#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR)
#endif /* FLASH_OPTCR2_PCROP */
/**
* @}
*/
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
* @brief FLASH Interrupt definition
* @{
*/
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_ERR ((uint32_t)0x02000000U) /*!< Error Interrupt source */
/**
* @}
*/
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
* @{
*/
#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000U)
#define FLASH_PSIZE_HALF_WORD ((uint32_t)FLASH_CR_PSIZE_0)
#define FLASH_PSIZE_WORD ((uint32_t)FLASH_CR_PSIZE_1)
#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)FLASH_CR_PSIZE)
#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFFU)
/**
* @}
*/
/** @defgroup FLASH_Keys FLASH Keys
* @{
*/
#define FLASH_KEY1 ((uint32_t)0x45670123U)
#define FLASH_KEY2 ((uint32_t)0xCDEF89ABU)
#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3BU)
#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7FU)
/**
* @}
*/
/** @defgroup FLASH_Sectors FLASH Sectors
* @{
*/
#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */
#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
* @{
*/
/**
* @brief Set the FLASH Latency.
* @param __LATENCY__: FLASH Latency
* The value of this parameter depend on device used within the same series
* @retval none
*/
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
/**
* @brief Get the FLASH Latency.
* @retval FLASH Latency
* The value of this parameter depend on device used within the same series
*/
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
/**
* @brief Enable the FLASH prefetch buffer.
* @retval none
*/
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
/**
* @brief Disable the FLASH prefetch buffer.
* @retval none
*/
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
/**
* @brief Enable the FLASH Adaptive Real-Time memory accelerator.
* @note The ART accelerator is available only for flash access on ITCM interface.
* @retval none
*/
#define __HAL_FLASH_ART_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
/**
* @brief Disable the FLASH Adaptive Real-Time memory accelerator.
* @retval none
*/
#define __HAL_FLASH_ART_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
/**
* @brief Resets the FLASH Adaptive Real-Time memory accelerator.
* @note This function must be used only when the Adaptive Real-Time memory accelerator
* is disabled.
* @retval None
*/
#define __HAL_FLASH_ART_RESET() (FLASH->ACR |= FLASH_ACR_ARTRST)
/**
* @brief Enable the specified FLASH interrupt.
* @param __INTERRUPT__ : FLASH interrupt
* This parameter can be any combination of the following values:
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
* @arg FLASH_IT_ERR: Error Interrupt
* @retval none
*/
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
/**
* @brief Disable the specified FLASH interrupt.
* @param __INTERRUPT__ : FLASH interrupt
* This parameter can be any combination of the following values:
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
* @arg FLASH_IT_ERR: Error Interrupt
* @retval none
*/
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
/**
* @brief Get the specified FLASH flag status.
* @param __FLAG__: specifies the FLASH flag to check.
* This parameter can be one of the following values:
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
* @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
* @arg FLASH_FLAG_BSY : FLASH Busy flag
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
/**
* @brief Clear the specified FLASH flag.
* @param __FLAG__: specifies the FLASH flags to clear.
* This parameter can be any combination of the following values:
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
* @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
* @retval none
*/
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
/**
* @}
*/
/* Include FLASH HAL Extension module */
#include "stm32f7xx_hal_flash_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASH_Exported_Functions
* @{
*/
/** @addtogroup FLASH_Exported_Functions_Group1
* @{
*/
/* Program operation functions ***********************************************/
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
/* FLASH IRQ handler method */
void HAL_FLASH_IRQHandler(void);
/* Callbacks in non blocking modes */
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
/**
* @}
*/
/** @addtogroup FLASH_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions **********************************************/
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_Lock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
/* Option bytes control */
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
/**
* @}
*/
/** @addtogroup FLASH_Exported_Functions_Group3
* @{
*/
/* Peripheral State functions ************************************************/
uint32_t HAL_FLASH_GetError(void);
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Variables FLASH Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Constants FLASH Private Constants
* @{
*/
/**
* @brief OPTCR register byte 1 (Bits[15:8]) base address
*/
#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASH_Private_Macros FLASH Private Macros
* @{
*/
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
* @{
*/
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Functions FLASH Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F7xx_HAL_FLASH_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/