5170 lines
221 KiB
C
5170 lines
221 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_ll_rcc.h
|
|
* @author MCD Application Team
|
|
* @version V1.2.0
|
|
* @date 30-December-2016
|
|
* @brief Header file of RCC LL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F7xx_LL_RCC_H
|
|
#define __STM32F7xx_LL_RCC_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx.h"
|
|
|
|
/** @addtogroup STM32F7xx_LL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#if defined(RCC)
|
|
|
|
/** @defgroup RCC_LL RCC
|
|
* @{
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/** @defgroup RCC_LL_Private_Variables RCC Private Variables
|
|
* @{
|
|
*/
|
|
|
|
#if defined(RCC_DCKCFGR1_PLLSAIDIVR)
|
|
static const uint8_t aRCC_PLLSAIDIVRPrescTable[4] = {2, 4, 8, 16};
|
|
#endif /* RCC_DCKCFGR1_PLLSAIDIVR */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup RCC_LL_Private_Macros RCC Private Macros
|
|
* @{
|
|
*/
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /*USE_FULL_LL_DRIVER*/
|
|
/* Exported types ------------------------------------------------------------*/
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup RCC_LL_Exported_Types RCC Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief RCC Clocks Frequency Structure
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */
|
|
uint32_t HCLK_Frequency; /*!< HCLK clock frequency */
|
|
uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */
|
|
uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */
|
|
} LL_RCC_ClocksTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation
|
|
* @brief Defines used to adapt values of different oscillators
|
|
* @note These values could be modified in the user environment according to
|
|
* HW set-up.
|
|
* @{
|
|
*/
|
|
#if !defined (HSE_VALUE)
|
|
#define HSE_VALUE 25000000U /*!< Value of the HSE oscillator in Hz */
|
|
#endif /* HSE_VALUE */
|
|
|
|
#if !defined (HSI_VALUE)
|
|
#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */
|
|
#endif /* HSI_VALUE */
|
|
|
|
#if !defined (LSE_VALUE)
|
|
#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */
|
|
#endif /* LSE_VALUE */
|
|
|
|
#if !defined (LSI_VALUE)
|
|
#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */
|
|
#endif /* LSI_VALUE */
|
|
|
|
#if !defined (EXTERNAL_CLOCK_VALUE)
|
|
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */
|
|
#endif /* EXTERNAL_CLOCK_VALUE */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines
|
|
* @brief Flags defines which can be used with LL_RCC_WriteReg function
|
|
* @{
|
|
*/
|
|
#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */
|
|
#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */
|
|
#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */
|
|
#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */
|
|
#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */
|
|
#define LL_RCC_CIR_PLLI2SRDYC RCC_CIR_PLLI2SRDYC /*!< PLLI2S Ready Interrupt Clear */
|
|
#define LL_RCC_CIR_PLLSAIRDYC RCC_CIR_PLLSAIRDYC /*!< PLLSAI Ready Interrupt Clear */
|
|
#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines
|
|
* @brief Flags defines which can be used with LL_RCC_ReadReg function
|
|
* @{
|
|
*/
|
|
#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */
|
|
#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */
|
|
#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */
|
|
#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */
|
|
#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */
|
|
#define LL_RCC_CIR_PLLI2SRDYF RCC_CIR_PLLI2SRDYF /*!< PLLI2S Ready Interrupt flag */
|
|
#define LL_RCC_CIR_PLLSAIRDYF RCC_CIR_PLLSAIRDYF /*!< PLLSAI Ready Interrupt flag */
|
|
#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */
|
|
#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */
|
|
#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */
|
|
#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */
|
|
#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */
|
|
#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */
|
|
#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */
|
|
#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_IT IT Defines
|
|
* @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions
|
|
* @{
|
|
*/
|
|
#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */
|
|
#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */
|
|
#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */
|
|
#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */
|
|
#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */
|
|
#define LL_RCC_CIR_PLLI2SRDYIE RCC_CIR_PLLI2SRDYIE /*!< PLLI2S Ready Interrupt Enable */
|
|
#define LL_RCC_CIR_PLLSAIRDYIE RCC_CIR_PLLSAIRDYIE /*!< PLLSAI Ready Interrupt Enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability
|
|
* @{
|
|
*/
|
|
#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */
|
|
#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */
|
|
#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */
|
|
#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */
|
|
#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */
|
|
#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
|
|
#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
|
|
#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
|
|
#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
|
|
#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
|
|
#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
|
|
#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
|
|
#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
|
|
#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
|
|
#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
|
|
#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
|
|
#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
|
|
#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
|
|
#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
|
|
#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
|
|
/**
|
|
* @}
|
|
*/
|
|
/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */
|
|
#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */
|
|
#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */
|
|
#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */
|
|
#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_MCO1SOURCE_HSI (uint32_t)(RCC_CFGR_MCO1|0x00000000U) /*!< HSI selection as MCO1 source */
|
|
#define LL_RCC_MCO1SOURCE_LSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_0 >> 16U)) /*!< LSE selection as MCO1 source */
|
|
#define LL_RCC_MCO1SOURCE_HSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_1 >> 16U)) /*!< HSE selection as MCO1 source */
|
|
#define LL_RCC_MCO1SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO1|((RCC_CFGR_MCO1_1|RCC_CFGR_MCO1_0) >> 16U)) /*!< PLLCLK selection as MCO1 source */
|
|
#define LL_RCC_MCO2SOURCE_SYSCLK (uint32_t)(RCC_CFGR_MCO2|0x00000000U) /*!< SYSCLK selection as MCO2 source */
|
|
#define LL_RCC_MCO2SOURCE_PLLI2S (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_0 >> 16U)) /*!< PLLI2S selection as MCO2 source */
|
|
#define LL_RCC_MCO2SOURCE_HSE (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_1 >> 16U)) /*!< HSE selection as MCO2 source */
|
|
#define LL_RCC_MCO2SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO2|((RCC_CFGR_MCO2_1|RCC_CFGR_MCO2_0) >> 16U)) /*!< PLLCLK selection as MCO2 source */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler
|
|
* @{
|
|
*/
|
|
#define LL_RCC_MCO1_DIV_1 (uint32_t)(RCC_CFGR_MCO1PRE|0x00000000U) /*!< MCO1 not divided */
|
|
#define LL_RCC_MCO1_DIV_2 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE_2 >> 16U)) /*!< MCO1 divided by 2 */
|
|
#define LL_RCC_MCO1_DIV_3 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_0) >> 16U)) /*!< MCO1 divided by 3 */
|
|
#define LL_RCC_MCO1_DIV_4 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_1) >> 16U)) /*!< MCO1 divided by 4 */
|
|
#define LL_RCC_MCO1_DIV_5 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE >> 16U)) /*!< MCO1 divided by 5 */
|
|
#define LL_RCC_MCO2_DIV_1 (uint32_t)(RCC_CFGR_MCO2PRE|0x00000000U) /*!< MCO2 not divided */
|
|
#define LL_RCC_MCO2_DIV_2 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE_2 >> 16U)) /*!< MCO2 divided by 2 */
|
|
#define LL_RCC_MCO2_DIV_3 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_0) >> 16U)) /*!< MCO2 divided by 3 */
|
|
#define LL_RCC_MCO2_DIV_4 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_1) >> 16U)) /*!< MCO2 divided by 4 */
|
|
#define LL_RCC_MCO2_DIV_5 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE >> 16U)) /*!< MCO2 divided by 5 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock
|
|
* @{
|
|
*/
|
|
#define LL_RCC_RTC_NOCLOCK 0x00000000U /*!< HSE not divided */
|
|
#define LL_RCC_RTC_HSE_DIV_2 RCC_CFGR_RTCPRE_1 /*!< HSE clock divided by 2 */
|
|
#define LL_RCC_RTC_HSE_DIV_3 (RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 3 */
|
|
#define LL_RCC_RTC_HSE_DIV_4 RCC_CFGR_RTCPRE_2 /*!< HSE clock divided by 4 */
|
|
#define LL_RCC_RTC_HSE_DIV_5 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 5 */
|
|
#define LL_RCC_RTC_HSE_DIV_6 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 6 */
|
|
#define LL_RCC_RTC_HSE_DIV_7 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 7 */
|
|
#define LL_RCC_RTC_HSE_DIV_8 RCC_CFGR_RTCPRE_3 /*!< HSE clock divided by 8 */
|
|
#define LL_RCC_RTC_HSE_DIV_9 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 9 */
|
|
#define LL_RCC_RTC_HSE_DIV_10 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 10 */
|
|
#define LL_RCC_RTC_HSE_DIV_11 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 11 */
|
|
#define LL_RCC_RTC_HSE_DIV_12 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 12 */
|
|
#define LL_RCC_RTC_HSE_DIV_13 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 13 */
|
|
#define LL_RCC_RTC_HSE_DIV_14 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 14 */
|
|
#define LL_RCC_RTC_HSE_DIV_15 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 15 */
|
|
#define LL_RCC_RTC_HSE_DIV_16 RCC_CFGR_RTCPRE_4 /*!< HSE clock divided by 16 */
|
|
#define LL_RCC_RTC_HSE_DIV_17 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 17 */
|
|
#define LL_RCC_RTC_HSE_DIV_18 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 18 */
|
|
#define LL_RCC_RTC_HSE_DIV_19 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 19 */
|
|
#define LL_RCC_RTC_HSE_DIV_20 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 20 */
|
|
#define LL_RCC_RTC_HSE_DIV_21 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 21 */
|
|
#define LL_RCC_RTC_HSE_DIV_22 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 22 */
|
|
#define LL_RCC_RTC_HSE_DIV_23 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 23 */
|
|
#define LL_RCC_RTC_HSE_DIV_24 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) /*!< HSE clock divided by 24 */
|
|
#define LL_RCC_RTC_HSE_DIV_25 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 25 */
|
|
#define LL_RCC_RTC_HSE_DIV_26 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 26 */
|
|
#define LL_RCC_RTC_HSE_DIV_27 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 27 */
|
|
#define LL_RCC_RTC_HSE_DIV_28 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 28 */
|
|
#define LL_RCC_RTC_HSE_DIV_29 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 29 */
|
|
#define LL_RCC_RTC_HSE_DIV_30 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 30 */
|
|
#define LL_RCC_RTC_HSE_DIV_31 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 31 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */
|
|
#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_USART1_CLKSOURCE_PCLK2 (uint32_t)((RCC_DCKCFGR2_USART1SEL << 16U) | 0x00000000U) /*!< PCLK2 clock used as USART1 clock source */
|
|
#define LL_RCC_USART1_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_USART1SEL << 16U) | RCC_DCKCFGR2_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */
|
|
#define LL_RCC_USART1_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_USART1SEL << 16U) | RCC_DCKCFGR2_USART1SEL_1) /*!< HSI clock used as USART1 clock source */
|
|
#define LL_RCC_USART1_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_USART1SEL << 16U) | RCC_DCKCFGR2_USART1SEL) /*!< LSE clock used as USART1 clock source */
|
|
#define LL_RCC_USART2_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_USART2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART2 clock source */
|
|
#define LL_RCC_USART2_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_USART2SEL << 16U) | RCC_DCKCFGR2_USART2SEL_0) /*!< SYSCLK clock used as USART2 clock source */
|
|
#define LL_RCC_USART2_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_USART2SEL << 16U) | RCC_DCKCFGR2_USART2SEL_1) /*!< HSI clock used as USART2 clock source */
|
|
#define LL_RCC_USART2_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_USART2SEL << 16U) | RCC_DCKCFGR2_USART2SEL) /*!< LSE clock used as USART2 clock source */
|
|
#define LL_RCC_USART3_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_USART3SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART3 clock source */
|
|
#define LL_RCC_USART3_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_USART3SEL << 16U) | RCC_DCKCFGR2_USART3SEL_0) /*!< SYSCLK clock used as USART3 clock source */
|
|
#define LL_RCC_USART3_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_USART3SEL << 16U) | RCC_DCKCFGR2_USART3SEL_1) /*!< HSI clock used as USART3 clock source */
|
|
#define LL_RCC_USART3_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_USART3SEL << 16U) | RCC_DCKCFGR2_USART3SEL) /*!< LSE clock used as USART3 clock source */
|
|
#define LL_RCC_USART6_CLKSOURCE_PCLK2 (uint32_t)((RCC_DCKCFGR2_USART6SEL << 16U) | 0x00000000U) /*!< PCLK2 clock used as USART6 clock source */
|
|
#define LL_RCC_USART6_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_USART6SEL << 16U) | RCC_DCKCFGR2_USART6SEL_0) /*!< SYSCLK clock used as USART6 clock source */
|
|
#define LL_RCC_USART6_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_USART6SEL << 16U) | RCC_DCKCFGR2_USART6SEL_1) /*!< HSI clock used as USART6 clock source */
|
|
#define LL_RCC_USART6_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_USART6SEL << 16U) | RCC_DCKCFGR2_USART6SEL) /*!< LSE clock used as USART6 clock source */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_UARTx_CLKSOURCE Peripheral UART clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_UART4_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_UART4SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as UART4 clock source */
|
|
#define LL_RCC_UART4_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_UART4SEL << 16U) | RCC_DCKCFGR2_UART4SEL_0) /*!< SYSCLK clock used as UART4 clock source */
|
|
#define LL_RCC_UART4_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_UART4SEL << 16U) | RCC_DCKCFGR2_UART4SEL_1) /*!< HSI clock used as UART4 clock source */
|
|
#define LL_RCC_UART4_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_UART4SEL << 16U) | RCC_DCKCFGR2_UART4SEL) /*!< LSE clock used as UART4 clock source */
|
|
#define LL_RCC_UART5_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_UART5SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as UART5 clock source */
|
|
#define LL_RCC_UART5_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_UART5SEL << 16U) | RCC_DCKCFGR2_UART5SEL_0) /*!< SYSCLK clock used as UART5 clock source */
|
|
#define LL_RCC_UART5_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_UART5SEL << 16U) | RCC_DCKCFGR2_UART5SEL_1) /*!< HSI clock used as UART5 clock source */
|
|
#define LL_RCC_UART5_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_UART5SEL << 16U) | RCC_DCKCFGR2_UART5SEL) /*!< LSE clock used as UART5 clock source */
|
|
#define LL_RCC_UART7_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_UART7SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as UART7 clock source */
|
|
#define LL_RCC_UART7_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_UART7SEL << 16U) | RCC_DCKCFGR2_UART7SEL_0) /*!< SYSCLK clock used as UART7 clock source */
|
|
#define LL_RCC_UART7_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_UART7SEL << 16U) | RCC_DCKCFGR2_UART7SEL_1) /*!< HSI clock used as UART7 clock source */
|
|
#define LL_RCC_UART7_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_UART7SEL << 16U) | RCC_DCKCFGR2_UART7SEL) /*!< LSE clock used as UART7 clock source */
|
|
#define LL_RCC_UART8_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_UART8SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as UART8 clock source */
|
|
#define LL_RCC_UART8_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_UART8SEL << 16U) | RCC_DCKCFGR2_UART8SEL_0) /*!< SYSCLK clock used as UART8 clock source */
|
|
#define LL_RCC_UART8_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_UART8SEL << 16U) | RCC_DCKCFGR2_UART8SEL_1) /*!< HSI clock used as UART8 clock source */
|
|
#define LL_RCC_UART8_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_UART8SEL << 16U) | RCC_DCKCFGR2_UART8SEL) /*!< LSE clock used as UART8 clock source */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE Peripheral I2C clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_I2C1_CLKSOURCE_PCLK1 (uint32_t)(RCC_DCKCFGR2_I2C1SEL|0x00000000U) /*!< PCLK1 clock used as I2C1 clock source */
|
|
#define LL_RCC_I2C1_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_I2C1SEL|(RCC_DCKCFGR2_I2C1SEL_0 >> 16U)) /*!< SYSCLK clock used as I2C1 clock source */
|
|
#define LL_RCC_I2C1_CLKSOURCE_HSI (uint32_t)(RCC_DCKCFGR2_I2C1SEL|(RCC_DCKCFGR2_I2C1SEL_1 >> 16U)) /*!< HSI clock used as I2C1 clock source */
|
|
#define LL_RCC_I2C2_CLKSOURCE_PCLK1 (uint32_t)(RCC_DCKCFGR2_I2C2SEL|0x00000000U) /*!< PCLK1 clock used as I2C2 clock source */
|
|
#define LL_RCC_I2C2_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_I2C2SEL|(RCC_DCKCFGR2_I2C2SEL_0 >> 16U)) /*!< SYSCLK clock used as I2C2 clock source */
|
|
#define LL_RCC_I2C2_CLKSOURCE_HSI (uint32_t)(RCC_DCKCFGR2_I2C2SEL|(RCC_DCKCFGR2_I2C2SEL_1 >> 16U)) /*!< HSI clock used as I2C2 clock source */
|
|
#define LL_RCC_I2C3_CLKSOURCE_PCLK1 (uint32_t)(RCC_DCKCFGR2_I2C3SEL|0x00000000U) /*!< PCLK1 clock used as I2C3 clock source */
|
|
#define LL_RCC_I2C3_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_I2C3SEL|(RCC_DCKCFGR2_I2C3SEL_0 >> 16U)) /*!< SYSCLK clock used as I2C3 clock source */
|
|
#define LL_RCC_I2C3_CLKSOURCE_HSI (uint32_t)(RCC_DCKCFGR2_I2C3SEL|(RCC_DCKCFGR2_I2C3SEL_1 >> 16U)) /*!< HSI clock used as I2C3 clock source */
|
|
#if defined(I2C4)
|
|
#define LL_RCC_I2C4_CLKSOURCE_PCLK1 (uint32_t)(RCC_DCKCFGR2_I2C4SEL|0x00000000U) /*!< PCLK1 clock used as I2C4 clock source */
|
|
#define LL_RCC_I2C4_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_I2C4SEL|(RCC_DCKCFGR2_I2C4SEL_0 >> 16U)) /*!< SYSCLK clock used as I2C4 clock source */
|
|
#define LL_RCC_I2C4_CLKSOURCE_HSI (uint32_t)(RCC_DCKCFGR2_I2C4SEL|(RCC_DCKCFGR2_I2C4SEL_1 >> 16U)) /*!< HSI clock used as I2C4 clock source */
|
|
#endif /* I2C4 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPTIM1 clock */
|
|
#define LL_RCC_LPTIM1_CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_0 /*!< LSI oscillator clock used as LPTIM1 clock */
|
|
#define LL_RCC_LPTIM1_CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_1 /*!< HSI oscillator clock used as LPTIM1 clock */
|
|
#define LL_RCC_LPTIM1_CLKSOURCE_LSE (uint32_t)(RCC_DCKCFGR2_LPTIM1SEL_1 | RCC_DCKCFGR2_LPTIM1SEL_0) /*!< LSE oscillator clock used as LPTIM1 clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SAI1_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR1_SAI1SEL | 0x00000000U) /*!< PLLSAI clock used as SAI1 clock source */
|
|
#define LL_RCC_SAI1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR1_SAI1SEL | (RCC_DCKCFGR1_SAI1SEL_0 >> 16U)) /*!< PLLI2S clock used as SAI1 clock source */
|
|
#define LL_RCC_SAI1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR1_SAI1SEL | (RCC_DCKCFGR1_SAI1SEL_1 >> 16U)) /*!< External pin clock used as SAI1 clock source */
|
|
#if defined(RCC_SAI1SEL_PLLSRC_SUPPORT)
|
|
#define LL_RCC_SAI1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR1_SAI1SEL | (RCC_DCKCFGR1_SAI1SEL >> 16U)) /*!< Main source clock used as SAI1 clock source */
|
|
#endif /* RCC_SAI1SEL_PLLSRC_SUPPORT */
|
|
#define LL_RCC_SAI2_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR1_SAI2SEL | 0x00000000U) /*!< PLLSAI clock used as SAI2 clock source */
|
|
#define LL_RCC_SAI2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR1_SAI2SEL | (RCC_DCKCFGR1_SAI2SEL_0 >> 16U)) /*!< PLLI2S clock used as SAI2 clock source */
|
|
#define LL_RCC_SAI2_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR1_SAI2SEL | (RCC_DCKCFGR1_SAI2SEL_1 >> 16U)) /*!< External pin clock used as SAI2 clock source */
|
|
#if defined(RCC_SAI2SEL_PLLSRC_SUPPORT)
|
|
#define LL_RCC_SAI2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR1_SAI2SEL | (RCC_DCKCFGR1_SAI2SEL >> 16U)) /*!< Main source clock used as SAI2 clock source */
|
|
#endif /* RCC_SAI2SEL_PLLSRC_SUPPORT */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_SDMMCx_CLKSOURCE Peripheral SDMMC clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SDMMC1_CLKSOURCE_PLL48CLK (uint32_t)(RCC_DCKCFGR2_SDMMC1SEL | 0x00000000U) /*!< PLL 48M domain clock used as SDMMC1 clock */
|
|
#define LL_RCC_SDMMC1_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_SDMMC1SEL | (RCC_DCKCFGR2_SDMMC1SEL >> 16U)) /*!< System clock clock used as SDMMC1 clock */
|
|
#if defined(SDMMC2)
|
|
#define LL_RCC_SDMMC2_CLKSOURCE_PLL48CLK (uint32_t)(RCC_DCKCFGR2_SDMMC2SEL | 0x00000000U) /*!< PLL 48M domain clock used as SDMMC2 clock */
|
|
#define LL_RCC_SDMMC2_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_SDMMC2SEL | (RCC_DCKCFGR2_SDMMC2SEL >> 16U)) /*!< System clock clock used as SDMMC2 clock */
|
|
#endif /* SDMMC2 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_RNG_CLKSOURCE_PLL 0x00000000U /*!< PLL clock used as RNG clock source */
|
|
#define LL_RCC_RNG_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI clock used as RNG clock source */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_USB_CLKSOURCE_PLL 0x00000000U /*!< PLL clock used as USB clock source */
|
|
#define LL_RCC_USB_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI1 clock used as USB clock source */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(DSI)
|
|
/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */
|
|
#define LL_RCC_DSI_CLKSOURCE_PLL RCC_DCKCFGR2_DSISEL /*!< PLL clock used as DSI byte lane clock source */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* DSI */
|
|
|
|
#if defined(CEC)
|
|
/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_CEC_CLKSOURCE_LSE 0x00000000U /*!< LSE oscillator clock used as CEC clock */
|
|
#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 RCC_DCKCFGR2_CECSEL /*!< HSI oscillator clock divided by 488 used as CEC clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* CEC */
|
|
|
|
/** @defgroup RCC_LL_EC_I2S1_CLKSOURCE Peripheral I2S clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_I2S1_CLKSOURCE_PLLI2S 0x00000000U /*!< I2S oscillator clock used as I2S1 clock */
|
|
#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CFGR_I2SSRC /*!< External pin clock used as I2S1 clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_CK48M_CLKSOURCE Peripheral 48Mhz domain clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */
|
|
#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(DFSDM1_Channel0)
|
|
/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM Audio clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1 0x00000000U /*!< SAI1 clock used as DFSDM1 Audio clock */
|
|
#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI2 RCC_DCKCFGR1_ADFSDM1SEL /*!< SAI2 clock used as DFSDM1 Audio clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM1 clock */
|
|
#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_DCKCFGR1_DFSDM1SEL /*!< System clock used as DFSDM1 clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* DFSDM1_Channel0 */
|
|
|
|
/** @defgroup RCC_LL_EC_USARTx Peripheral USART get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_USART1_CLKSOURCE RCC_DCKCFGR2_USART1SEL /*!< USART1 Clock source selection */
|
|
#define LL_RCC_USART2_CLKSOURCE RCC_DCKCFGR2_USART2SEL /*!< USART2 Clock source selection */
|
|
#define LL_RCC_USART3_CLKSOURCE RCC_DCKCFGR2_USART3SEL /*!< USART3 Clock source selection */
|
|
#define LL_RCC_USART6_CLKSOURCE RCC_DCKCFGR2_USART6SEL /*!< USART6 Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_UARTx Peripheral UART get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_UART4_CLKSOURCE RCC_DCKCFGR2_UART4SEL /*!< UART4 Clock source selection */
|
|
#define LL_RCC_UART5_CLKSOURCE RCC_DCKCFGR2_UART5SEL /*!< UART5 Clock source selection */
|
|
#define LL_RCC_UART7_CLKSOURCE RCC_DCKCFGR2_UART7SEL /*!< UART7 Clock source selection */
|
|
#define LL_RCC_UART8_CLKSOURCE RCC_DCKCFGR2_UART8SEL /*!< UART8 Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_I2Cx Peripheral I2C get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_I2C1_CLKSOURCE RCC_DCKCFGR2_I2C1SEL /*!< I2C1 Clock source selection */
|
|
#define LL_RCC_I2C2_CLKSOURCE RCC_DCKCFGR2_I2C2SEL /*!< I2C2 Clock source selection */
|
|
#define LL_RCC_I2C3_CLKSOURCE RCC_DCKCFGR2_I2C3SEL /*!< I2C3 Clock source selection */
|
|
#if defined(I2C4)
|
|
#define LL_RCC_I2C4_CLKSOURCE RCC_DCKCFGR2_I2C4SEL /*!< I2C4 Clock source selection */
|
|
#endif /* I2C4 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_LPTIM1_CLKSOURCE RCC_DCKCFGR2_LPTIM1SEL /*!< LPTIM1 Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_SAIx Peripheral SAI get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SAI1_CLKSOURCE RCC_DCKCFGR1_SAI1SEL /*!< SAI1 Clock source selection */
|
|
#define LL_RCC_SAI2_CLKSOURCE RCC_DCKCFGR1_SAI2SEL /*!< SAI2 Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_SDMMCx Peripheral SDMMC get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SDMMC1_CLKSOURCE RCC_DCKCFGR2_SDMMC1SEL /*!< SDMMC1 Clock source selection */
|
|
#if defined(SDMMC2)
|
|
#define LL_RCC_SDMMC2_CLKSOURCE RCC_DCKCFGR2_SDMMC2SEL /*!< SDMMC2 Clock source selection */
|
|
#endif /* SDMMC2 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_CK48M Peripheral CK48M get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< CK48M Domain clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_RNG_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< RNG Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_USB_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< USB Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(CEC)
|
|
/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_CEC_CLKSOURCE RCC_DCKCFGR2_CECSEL /*!< CEC Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* CEC */
|
|
|
|
/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_I2S1_CLKSOURCE RCC_CFGR_I2SSRC /*!< I2S Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
#if defined(DFSDM1_Channel0)
|
|
/** @defgroup RCC_LL_EC_DFSDM_AUDIO Peripheral DFSDM Audio get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_DCKCFGR1_ADFSDM1SEL /*!< DFSDM Audio Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_DFSDM Peripheral DFSDM get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_DFSDM1_CLKSOURCE RCC_DCKCFGR1_DFSDM1SEL /*!< DFSDM Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* DFSDM1_Channel0 */
|
|
|
|
#if defined(DSI)
|
|
/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_DSI_CLKSOURCE RCC_DCKCFGR2_DSISEL /*!< DSI Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* DSI */
|
|
|
|
#if defined(LTDC)
|
|
/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_LTDC_CLKSOURCE RCC_DCKCFGR1_PLLSAIDIVR /*!< LTDC Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* LTDC */
|
|
|
|
#if defined(SPDIFRX)
|
|
/** @defgroup RCC_LL_EC_SPDIFRX Peripheral SPDIFRX get clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SPDIFRX1_CLKSOURCE RCC_PLLI2SCFGR_PLLI2SP /*!< SPDIFRX Clock source selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* SPDIFRX */
|
|
|
|
/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */
|
|
#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */
|
|
#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */
|
|
#define LL_RCC_RTC_CLKSOURCE_HSE RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by HSE prescaler used as RTC clock */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_TIM_PRESCALER_TWICE 0x00000000U /*!< Timers clock to twice PCLK */
|
|
#define LL_RCC_TIM_PRESCALER_FOUR_TIMES RCC_DCKCFGR1_TIMPRE /*!< Timers clock to four time PCLK */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLI2S and PLLSAI entry clock source
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */
|
|
#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_PLLM_DIV PLL, PLLI2S and PLLSAI division factor
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 2 */
|
|
#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 3 */
|
|
#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 4 */
|
|
#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 5 */
|
|
#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 6 */
|
|
#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 7 */
|
|
#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 8 */
|
|
#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 9 */
|
|
#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 10 */
|
|
#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 11 */
|
|
#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 12 */
|
|
#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 13 */
|
|
#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 14 */
|
|
#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 15 */
|
|
#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 16 */
|
|
#define LL_RCC_PLLM_DIV_17 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 17 */
|
|
#define LL_RCC_PLLM_DIV_18 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 18 */
|
|
#define LL_RCC_PLLM_DIV_19 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 19 */
|
|
#define LL_RCC_PLLM_DIV_20 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 20 */
|
|
#define LL_RCC_PLLM_DIV_21 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 21 */
|
|
#define LL_RCC_PLLM_DIV_22 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 22 */
|
|
#define LL_RCC_PLLM_DIV_23 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 23 */
|
|
#define LL_RCC_PLLM_DIV_24 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 24 */
|
|
#define LL_RCC_PLLM_DIV_25 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 25 */
|
|
#define LL_RCC_PLLM_DIV_26 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 26 */
|
|
#define LL_RCC_PLLM_DIV_27 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 27 */
|
|
#define LL_RCC_PLLM_DIV_28 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 28 */
|
|
#define LL_RCC_PLLM_DIV_29 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 29 */
|
|
#define LL_RCC_PLLM_DIV_30 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 30 */
|
|
#define LL_RCC_PLLM_DIV_31 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 31 */
|
|
#define LL_RCC_PLLM_DIV_32 (RCC_PLLCFGR_PLLM_5) /*!< PLL, PLLI2S and PLLSAI division factor by 32 */
|
|
#define LL_RCC_PLLM_DIV_33 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 33 */
|
|
#define LL_RCC_PLLM_DIV_34 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 34 */
|
|
#define LL_RCC_PLLM_DIV_35 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 35 */
|
|
#define LL_RCC_PLLM_DIV_36 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 36 */
|
|
#define LL_RCC_PLLM_DIV_37 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 37 */
|
|
#define LL_RCC_PLLM_DIV_38 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 38 */
|
|
#define LL_RCC_PLLM_DIV_39 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 39 */
|
|
#define LL_RCC_PLLM_DIV_40 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 40 */
|
|
#define LL_RCC_PLLM_DIV_41 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 41 */
|
|
#define LL_RCC_PLLM_DIV_42 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 42 */
|
|
#define LL_RCC_PLLM_DIV_43 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 43 */
|
|
#define LL_RCC_PLLM_DIV_44 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 44 */
|
|
#define LL_RCC_PLLM_DIV_45 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 45 */
|
|
#define LL_RCC_PLLM_DIV_46 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 46 */
|
|
#define LL_RCC_PLLM_DIV_47 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 47 */
|
|
#define LL_RCC_PLLM_DIV_48 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 48 */
|
|
#define LL_RCC_PLLM_DIV_49 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 49 */
|
|
#define LL_RCC_PLLM_DIV_50 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 50 */
|
|
#define LL_RCC_PLLM_DIV_51 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 51 */
|
|
#define LL_RCC_PLLM_DIV_52 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 52 */
|
|
#define LL_RCC_PLLM_DIV_53 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 53 */
|
|
#define LL_RCC_PLLM_DIV_54 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 54 */
|
|
#define LL_RCC_PLLM_DIV_55 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 55 */
|
|
#define LL_RCC_PLLM_DIV_56 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 56 */
|
|
#define LL_RCC_PLLM_DIV_57 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 57 */
|
|
#define LL_RCC_PLLM_DIV_58 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 58 */
|
|
#define LL_RCC_PLLM_DIV_59 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 59 */
|
|
#define LL_RCC_PLLM_DIV_60 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 60 */
|
|
#define LL_RCC_PLLM_DIV_61 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 61 */
|
|
#define LL_RCC_PLLM_DIV_62 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 62 */
|
|
#define LL_RCC_PLLM_DIV_63 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 63 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(RCC_PLLCFGR_PLLR)
|
|
/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */
|
|
#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */
|
|
#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */
|
|
#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */
|
|
#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */
|
|
#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* RCC_PLLCFGR_PLLR */
|
|
|
|
/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLP_DIV_2 0x00000000U /*!< Main PLL division factor for PLLP output by 2 */
|
|
#define LL_RCC_PLLP_DIV_4 RCC_PLLCFGR_PLLP_0 /*!< Main PLL division factor for PLLP output by 4 */
|
|
#define LL_RCC_PLLP_DIV_6 RCC_PLLCFGR_PLLP_1 /*!< Main PLL division factor for PLLP output by 6 */
|
|
#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 8 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLQ_DIV_2 RCC_PLLCFGR_PLLQ_1 /*!< Main PLL division factor for PLLQ output by 2 */
|
|
#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 3 */
|
|
#define LL_RCC_PLLQ_DIV_4 RCC_PLLCFGR_PLLQ_2 /*!< Main PLL division factor for PLLQ output by 4 */
|
|
#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 5 */
|
|
#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */
|
|
#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 7 */
|
|
#define LL_RCC_PLLQ_DIV_8 RCC_PLLCFGR_PLLQ_3 /*!< Main PLL division factor for PLLQ output by 8 */
|
|
#define LL_RCC_PLLQ_DIV_9 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 9 */
|
|
#define LL_RCC_PLLQ_DIV_10 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 10 */
|
|
#define LL_RCC_PLLQ_DIV_11 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 11 */
|
|
#define LL_RCC_PLLQ_DIV_12 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 12 */
|
|
#define LL_RCC_PLLQ_DIV_13 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 13 */
|
|
#define LL_RCC_PLLQ_DIV_14 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 14 */
|
|
#define LL_RCC_PLLQ_DIV_15 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 15 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_PLL_SPRE_SEL PLL Spread Spectrum Selection
|
|
* @{
|
|
*/
|
|
#define LL_RCC_SPREAD_SELECT_CENTER 0x00000000U /*!< PLL center spread spectrum selection */
|
|
#define LL_RCC_SPREAD_SELECT_DOWN RCC_SSCGR_SPREADSEL /*!< PLL down spread spectrum selection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_PLLI2SQ PLLI2SQ division factor (PLLI2SQ)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLI2SQ_DIV_2 RCC_PLLI2SCFGR_PLLI2SQ_1 /*!< PLLI2S division factor for PLLI2SQ output by 2 */
|
|
#define LL_RCC_PLLI2SQ_DIV_3 (RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 3 */
|
|
#define LL_RCC_PLLI2SQ_DIV_4 RCC_PLLI2SCFGR_PLLI2SQ_2 /*!< PLLI2S division factor for PLLI2SQ output by 4 */
|
|
#define LL_RCC_PLLI2SQ_DIV_5 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 5 */
|
|
#define LL_RCC_PLLI2SQ_DIV_6 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 6 */
|
|
#define LL_RCC_PLLI2SQ_DIV_7 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 7 */
|
|
#define LL_RCC_PLLI2SQ_DIV_8 RCC_PLLI2SCFGR_PLLI2SQ_3 /*!< PLLI2S division factor for PLLI2SQ output by 8 */
|
|
#define LL_RCC_PLLI2SQ_DIV_9 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 9 */
|
|
#define LL_RCC_PLLI2SQ_DIV_10 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 10 */
|
|
#define LL_RCC_PLLI2SQ_DIV_11 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 11 */
|
|
#define LL_RCC_PLLI2SQ_DIV_12 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2) /*!< PLLI2S division factor for PLLI2SQ output by 12 */
|
|
#define LL_RCC_PLLI2SQ_DIV_13 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 13 */
|
|
#define LL_RCC_PLLI2SQ_DIV_14 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 14 */
|
|
#define LL_RCC_PLLI2SQ_DIV_15 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 15 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_PLLI2SDIVQ PLLI2SDIVQ division factor (PLLI2SDIVQ)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_1 0x00000000U /*!< PLLI2S division factor for PLLI2SDIVQ output by 1 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_2 RCC_DCKCFGR1_PLLI2SDIVQ_0 /*!< PLLI2S division factor for PLLI2SDIVQ output by 2 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_3 RCC_DCKCFGR1_PLLI2SDIVQ_1 /*!< PLLI2S division factor for PLLI2SDIVQ output by 3 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_4 (RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 4 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_5 RCC_DCKCFGR1_PLLI2SDIVQ_2 /*!< PLLI2S division factor for PLLI2SDIVQ output by 5 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_6 (RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 6 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_7 (RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 7 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_8 (RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 8 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_9 RCC_DCKCFGR1_PLLI2SDIVQ_3 /*!< PLLI2S division factor for PLLI2SDIVQ output by 9 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_10 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 10 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_11 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 11 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_12 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 12 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_13 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 13 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_14 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 14 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_15 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 15 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_16 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 16 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_17 RCC_DCKCFGR1_PLLI2SDIVQ_4 /*!< PLLI2S division factor for PLLI2SDIVQ output by 17 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_18 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 18 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_19 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 19 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_20 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 20 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_21 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 21 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_22 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 22 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_23 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 23 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_24 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 24 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_25 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3) /*!< PLLI2S division factor for PLLI2SDIVQ output by 25 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_26 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 26 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_27 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 27 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_28 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 28 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_29 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 29 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_30 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 30 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_31 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 31 */
|
|
#define LL_RCC_PLLI2SDIVQ_DIV_32 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 32 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_PLLI2SR PLLI2SR division factor (PLLI2SR)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLI2SR_DIV_2 RCC_PLLI2SCFGR_PLLI2SR_1 /*!< PLLI2S division factor for PLLI2SR output by 2 */
|
|
#define LL_RCC_PLLI2SR_DIV_3 (RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 3 */
|
|
#define LL_RCC_PLLI2SR_DIV_4 RCC_PLLI2SCFGR_PLLI2SR_2 /*!< PLLI2S division factor for PLLI2SR output by 4 */
|
|
#define LL_RCC_PLLI2SR_DIV_5 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 5 */
|
|
#define LL_RCC_PLLI2SR_DIV_6 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1) /*!< PLLI2S division factor for PLLI2SR output by 6 */
|
|
#define LL_RCC_PLLI2SR_DIV_7 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 7 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(RCC_PLLI2SCFGR_PLLI2SP)
|
|
/** @defgroup RCC_LL_EC_PLLI2SP PLLI2SP division factor (PLLI2SP)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLI2SP_DIV_2 0x00000000U /*!< PLLI2S division factor for PLLI2SP output by 2 */
|
|
#define LL_RCC_PLLI2SP_DIV_4 RCC_PLLI2SCFGR_PLLI2SP_0 /*!< PLLI2S division factor for PLLI2SP output by 4 */
|
|
#define LL_RCC_PLLI2SP_DIV_6 RCC_PLLI2SCFGR_PLLI2SP_1 /*!< PLLI2S division factor for PLLI2SP output by 6 */
|
|
#define LL_RCC_PLLI2SP_DIV_8 (RCC_PLLI2SCFGR_PLLI2SP_1 | RCC_PLLI2SCFGR_PLLI2SP_0) /*!< PLLI2S division factor for PLLI2SP output by 8 */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* RCC_PLLI2SCFGR_PLLI2SP */
|
|
|
|
/** @defgroup RCC_LL_EC_PLLSAIQ PLLSAIQ division factor (PLLSAIQ)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLSAIQ_DIV_2 RCC_PLLSAICFGR_PLLSAIQ_1 /*!< PLLSAI division factor for PLLSAIQ output by 2 */
|
|
#define LL_RCC_PLLSAIQ_DIV_3 (RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 3 */
|
|
#define LL_RCC_PLLSAIQ_DIV_4 RCC_PLLSAICFGR_PLLSAIQ_2 /*!< PLLSAI division factor for PLLSAIQ output by 4 */
|
|
#define LL_RCC_PLLSAIQ_DIV_5 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 5 */
|
|
#define LL_RCC_PLLSAIQ_DIV_6 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 6 */
|
|
#define LL_RCC_PLLSAIQ_DIV_7 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 7 */
|
|
#define LL_RCC_PLLSAIQ_DIV_8 RCC_PLLSAICFGR_PLLSAIQ_3 /*!< PLLSAI division factor for PLLSAIQ output by 8 */
|
|
#define LL_RCC_PLLSAIQ_DIV_9 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 9 */
|
|
#define LL_RCC_PLLSAIQ_DIV_10 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 10 */
|
|
#define LL_RCC_PLLSAIQ_DIV_11 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 11 */
|
|
#define LL_RCC_PLLSAIQ_DIV_12 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2) /*!< PLLSAI division factor for PLLSAIQ output by 12 */
|
|
#define LL_RCC_PLLSAIQ_DIV_13 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 13 */
|
|
#define LL_RCC_PLLSAIQ_DIV_14 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 14 */
|
|
#define LL_RCC_PLLSAIQ_DIV_15 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 15 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EC_PLLSAIDIVQ PLLSAIDIVQ division factor (PLLSAIDIVQ)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_1 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVQ output by 1 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_2 RCC_DCKCFGR1_PLLSAIDIVQ_0 /*!< PLLSAI division factor for PLLSAIDIVQ output by 2 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_3 RCC_DCKCFGR1_PLLSAIDIVQ_1 /*!< PLLSAI division factor for PLLSAIDIVQ output by 3 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_4 (RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 4 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_5 RCC_DCKCFGR1_PLLSAIDIVQ_2 /*!< PLLSAI division factor for PLLSAIDIVQ output by 5 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_6 (RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 6 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_7 (RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 7 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_8 (RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 8 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_9 RCC_DCKCFGR1_PLLSAIDIVQ_3 /*!< PLLSAI division factor for PLLSAIDIVQ output by 9 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_10 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 10 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_11 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 11 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_12 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 12 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_13 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 13 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_14 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 14 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_15 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 15 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_16 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 16 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_17 RCC_DCKCFGR1_PLLSAIDIVQ_4 /*!< PLLSAI division factor for PLLSAIDIVQ output by 17 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_18 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 18 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_19 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 19 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_20 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 20 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_21 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 21 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_22 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 22 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_23 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 23 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_24 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 24 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_25 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3) /*!< PLLSAI division factor for PLLSAIDIVQ output by 25 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_26 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 26 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_27 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 27 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_28 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 28 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_29 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 29 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_30 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 30 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_31 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 31 */
|
|
#define LL_RCC_PLLSAIDIVQ_DIV_32 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 32 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(RCC_PLLSAICFGR_PLLSAIR)
|
|
/** @defgroup RCC_LL_EC_PLLSAIR PLLSAIR division factor (PLLSAIR)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLSAIR_DIV_2 RCC_PLLSAICFGR_PLLSAIR_1 /*!< PLLSAI division factor for PLLSAIR output by 2 */
|
|
#define LL_RCC_PLLSAIR_DIV_3 (RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 3 */
|
|
#define LL_RCC_PLLSAIR_DIV_4 RCC_PLLSAICFGR_PLLSAIR_2 /*!< PLLSAI division factor for PLLSAIR output by 4 */
|
|
#define LL_RCC_PLLSAIR_DIV_5 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 5 */
|
|
#define LL_RCC_PLLSAIR_DIV_6 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1) /*!< PLLSAI division factor for PLLSAIR output by 6 */
|
|
#define LL_RCC_PLLSAIR_DIV_7 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 7 */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* RCC_PLLSAICFGR_PLLSAIR */
|
|
|
|
#if defined(RCC_DCKCFGR1_PLLSAIDIVR)
|
|
/** @defgroup RCC_LL_EC_PLLSAIDIVR PLLSAIDIVR division factor (PLLSAIDIVR)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLSAIDIVR_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVR output by 2 */
|
|
#define LL_RCC_PLLSAIDIVR_DIV_4 RCC_DCKCFGR1_PLLSAIDIVR_0 /*!< PLLSAI division factor for PLLSAIDIVR output by 4 */
|
|
#define LL_RCC_PLLSAIDIVR_DIV_8 RCC_DCKCFGR1_PLLSAIDIVR_1 /*!< PLLSAI division factor for PLLSAIDIVR output by 8 */
|
|
#define LL_RCC_PLLSAIDIVR_DIV_16 (RCC_DCKCFGR1_PLLSAIDIVR_1 | RCC_DCKCFGR1_PLLSAIDIVR_0) /*!< PLLSAI division factor for PLLSAIDIVR output by 16 */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* RCC_DCKCFGR1_PLLSAIDIVR */
|
|
|
|
/** @defgroup RCC_LL_EC_PLLSAIP PLLSAIP division factor (PLLSAIP)
|
|
* @{
|
|
*/
|
|
#define LL_RCC_PLLSAIP_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIP output by 2 */
|
|
#define LL_RCC_PLLSAIP_DIV_4 RCC_PLLSAICFGR_PLLSAIP_0 /*!< PLLSAI division factor for PLLSAIP output by 4 */
|
|
#define LL_RCC_PLLSAIP_DIV_6 RCC_PLLSAICFGR_PLLSAIP_1 /*!< PLLSAI division factor for PLLSAIP output by 6 */
|
|
#define LL_RCC_PLLSAIP_DIV_8 (RCC_PLLSAICFGR_PLLSAIP_1 | RCC_PLLSAICFGR_PLLSAIP_0) /*!< PLLSAI division factor for PLLSAIP output by 8 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Write a value in RCC register
|
|
* @param __REG__ Register to be written
|
|
* @param __VALUE__ Value to be written in the register
|
|
* @retval None
|
|
*/
|
|
#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__))
|
|
|
|
/**
|
|
* @brief Read a value in RCC register
|
|
* @param __REG__ Register to be read
|
|
* @retval Register value
|
|
*/
|
|
#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the PLLCLK frequency on system domain
|
|
* @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLN__ Between 50 and 432
|
|
* @param __PLLP__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLP_DIV_2
|
|
* @arg @ref LL_RCC_PLLP_DIV_4
|
|
* @arg @ref LL_RCC_PLLP_DIV_6
|
|
* @arg @ref LL_RCC_PLLP_DIV_8
|
|
* @retval PLL clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \
|
|
((((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos ) + 1U) * 2U))
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the PLLCLK frequency used on 48M domain
|
|
* @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLN__ Between 50 and 432
|
|
* @param __PLLQ__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLQ_DIV_15
|
|
* @retval PLL clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \
|
|
((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos ))
|
|
|
|
#if defined(DSI)
|
|
/**
|
|
* @brief Helper macro to calculate the PLLCLK frequency used on DSI
|
|
* @note ex: @ref __LL_RCC_CALC_PLLCLK_DSI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLN__ Between 50 and 432
|
|
* @param __PLLR__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLR_DIV_2
|
|
* @arg @ref LL_RCC_PLLR_DIV_3
|
|
* @arg @ref LL_RCC_PLLR_DIV_4
|
|
* @arg @ref LL_RCC_PLLR_DIV_5
|
|
* @arg @ref LL_RCC_PLLR_DIV_6
|
|
* @arg @ref LL_RCC_PLLR_DIV_7
|
|
* @retval PLL clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLCLK_DSI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \
|
|
((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos ))
|
|
#endif /* DSI */
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the PLLSAI frequency used for SAI1 and SAI2 domains
|
|
* @note ex: @ref __LL_RCC_CALC_PLLSAI_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetQ (), @ref LL_RCC_PLLSAI_GetDIVQ ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLSAIN__ Between 50 and 432
|
|
* @param __PLLSAIQ__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_15
|
|
* @param __PLLSAIDIVQ__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32
|
|
* @retval PLLSAI clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLSAI_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIQ__, __PLLSAIDIVQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \
|
|
(((__PLLSAIQ__) >> RCC_PLLSAICFGR_PLLSAIQ_Pos) * (((__PLLSAIDIVQ__) >> RCC_DCKCFGR1_PLLSAIDIVQ_Pos) + 1U)))
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the PLLSAI frequency used on 48Mhz domain
|
|
* @note ex: @ref __LL_RCC_CALC_PLLSAI_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetP ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLSAIN__ Between 50 and 432
|
|
* @param __PLLSAIP__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_8
|
|
* @retval PLLSAI clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLSAI_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \
|
|
((((__PLLSAIP__) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U ) * 2U))
|
|
|
|
#if defined(LTDC)
|
|
/**
|
|
* @brief Helper macro to calculate the PLLSAI frequency used for LTDC domain
|
|
* @note ex: @ref __LL_RCC_CALC_PLLSAI_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetR (), @ref LL_RCC_PLLSAI_GetDIVR ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLSAIN__ Between 50 and 432
|
|
* @param __PLLSAIR__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_7
|
|
* @param __PLLSAIDIVR__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_16
|
|
* @retval PLLSAI clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLSAI_LTDC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIR__, __PLLSAIDIVR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \
|
|
(((__PLLSAIR__) >> RCC_PLLSAICFGR_PLLSAIR_Pos) * (aRCC_PLLSAIDIVRPrescTable[(__PLLSAIDIVR__) >> RCC_DCKCFGR1_PLLSAIDIVR_Pos])))
|
|
#endif /* LTDC */
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the PLLI2S frequency used for SAI1 and SAI2 domains
|
|
* @note ex: @ref __LL_RCC_CALC_PLLI2S_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ (), @ref LL_RCC_PLLI2S_GetDIVQ ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLI2SN__ Between 50 and 432
|
|
* @param __PLLI2SQ__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_15
|
|
* @param __PLLI2SDIVQ__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32
|
|
* @retval PLLI2S clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SDIVQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \
|
|
(((__PLLI2SQ__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos) * (((__PLLI2SDIVQ__) >> RCC_DCKCFGR1_PLLI2SDIVQ_Pos) + 1U)))
|
|
|
|
#if defined(SPDIFRX)
|
|
/**
|
|
* @brief Helper macro to calculate the PLLI2S frequency used on SPDIFRX domain
|
|
* @note ex: @ref __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetP ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLI2SN__ Between 50 and 432
|
|
* @param __PLLI2SP__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_8
|
|
* @retval PLLI2S clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \
|
|
((((__PLLI2SP__) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) * 2U))
|
|
#endif /* SPDIFRX */
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the PLLI2S frequency used for I2S domain
|
|
* @note ex: @ref __LL_RCC_CALC_PLLI2S_I2S_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
|
|
* @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetR ());
|
|
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
|
|
* @param __PLLM__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param __PLLI2SN__ Between 50 and 432
|
|
* @param __PLLI2SR__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_7
|
|
* @retval PLLI2S clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PLLI2S_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \
|
|
((__PLLI2SR__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos))
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the HCLK frequency
|
|
* @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK)
|
|
* @param __AHBPRESCALER__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_1
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_2
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_4
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_8
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_16
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_64
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_128
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_256
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_512
|
|
* @retval HCLK clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos])
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the PCLK1 frequency (ABP1)
|
|
* @param __HCLKFREQ__ HCLK frequency
|
|
* @param __APB1PRESCALER__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_APB1_DIV_1
|
|
* @arg @ref LL_RCC_APB1_DIV_2
|
|
* @arg @ref LL_RCC_APB1_DIV_4
|
|
* @arg @ref LL_RCC_APB1_DIV_8
|
|
* @arg @ref LL_RCC_APB1_DIV_16
|
|
* @retval PCLK1 clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos])
|
|
|
|
/**
|
|
* @brief Helper macro to calculate the PCLK2 frequency (ABP2)
|
|
* @param __HCLKFREQ__ HCLK frequency
|
|
* @param __APB2PRESCALER__ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_APB2_DIV_1
|
|
* @arg @ref LL_RCC_APB2_DIV_2
|
|
* @arg @ref LL_RCC_APB2_DIV_4
|
|
* @arg @ref LL_RCC_APB2_DIV_8
|
|
* @arg @ref LL_RCC_APB2_DIV_16
|
|
* @retval PCLK2 clock frequency (in Hz)
|
|
*/
|
|
#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos])
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_HSE HSE
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the Clock Security System.
|
|
* @rmtoll CR CSSON LL_RCC_HSE_EnableCSS
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void)
|
|
{
|
|
SET_BIT(RCC->CR, RCC_CR_CSSON);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable HSE external oscillator (HSE Bypass)
|
|
* @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void)
|
|
{
|
|
SET_BIT(RCC->CR, RCC_CR_HSEBYP);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable HSE external oscillator (HSE Bypass)
|
|
* @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void)
|
|
{
|
|
CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable HSE crystal oscillator (HSE ON)
|
|
* @rmtoll CR HSEON LL_RCC_HSE_Enable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_HSE_Enable(void)
|
|
{
|
|
SET_BIT(RCC->CR, RCC_CR_HSEON);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable HSE crystal oscillator (HSE ON)
|
|
* @rmtoll CR HSEON LL_RCC_HSE_Disable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_HSE_Disable(void)
|
|
{
|
|
CLEAR_BIT(RCC->CR, RCC_CR_HSEON);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if HSE oscillator Ready
|
|
* @rmtoll CR HSERDY LL_RCC_HSE_IsReady
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void)
|
|
{
|
|
return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_HSI HSI
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable HSI oscillator
|
|
* @rmtoll CR HSION LL_RCC_HSI_Enable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_HSI_Enable(void)
|
|
{
|
|
SET_BIT(RCC->CR, RCC_CR_HSION);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable HSI oscillator
|
|
* @rmtoll CR HSION LL_RCC_HSI_Disable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_HSI_Disable(void)
|
|
{
|
|
CLEAR_BIT(RCC->CR, RCC_CR_HSION);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if HSI clock is ready
|
|
* @rmtoll CR HSIRDY LL_RCC_HSI_IsReady
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void)
|
|
{
|
|
return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY));
|
|
}
|
|
|
|
/**
|
|
* @brief Get HSI Calibration value
|
|
* @note When HSITRIM is written, HSICAL is updated with the sum of
|
|
* HSITRIM and the factory trim value
|
|
* @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration
|
|
* @retval Between Min_Data = 0x00 and Max_Data = 0xFF
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos);
|
|
}
|
|
|
|
/**
|
|
* @brief Set HSI Calibration trimming
|
|
* @note user-programmable trimming value that is added to the HSICAL
|
|
* @note Default value is 16, which, when added to the HSICAL value,
|
|
* should trim the HSI to 16 MHz +/- 1 %
|
|
* @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming
|
|
* @param Value Between Min_Data = 0 and Max_Data = 31
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value)
|
|
{
|
|
MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos);
|
|
}
|
|
|
|
/**
|
|
* @brief Get HSI Calibration trimming
|
|
* @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming
|
|
* @retval Between Min_Data = 0 and Max_Data = 31
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_LSE LSE
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable Low Speed External (LSE) crystal.
|
|
* @rmtoll BDCR LSEON LL_RCC_LSE_Enable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_LSE_Enable(void)
|
|
{
|
|
SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Low Speed External (LSE) crystal.
|
|
* @rmtoll BDCR LSEON LL_RCC_LSE_Disable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_LSE_Disable(void)
|
|
{
|
|
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable external clock source (LSE bypass).
|
|
* @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void)
|
|
{
|
|
SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable external clock source (LSE bypass).
|
|
* @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void)
|
|
{
|
|
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
|
|
}
|
|
|
|
/**
|
|
* @brief Set LSE oscillator drive capability
|
|
* @note The oscillator is in Xtal mode when it is not in bypass mode.
|
|
* @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability
|
|
* @param LSEDrive This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_LSEDRIVE_LOW
|
|
* @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
|
|
* @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
|
|
* @arg @ref LL_RCC_LSEDRIVE_HIGH
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive)
|
|
{
|
|
MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive);
|
|
}
|
|
|
|
/**
|
|
* @brief Get LSE oscillator drive capability
|
|
* @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_LSEDRIVE_LOW
|
|
* @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
|
|
* @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
|
|
* @arg @ref LL_RCC_LSEDRIVE_HIGH
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if LSE oscillator Ready
|
|
* @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void)
|
|
{
|
|
return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_LSI LSI
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable LSI Oscillator
|
|
* @rmtoll CSR LSION LL_RCC_LSI_Enable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_LSI_Enable(void)
|
|
{
|
|
SET_BIT(RCC->CSR, RCC_CSR_LSION);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable LSI Oscillator
|
|
* @rmtoll CSR LSION LL_RCC_LSI_Disable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_LSI_Disable(void)
|
|
{
|
|
CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if LSI is Ready
|
|
* @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void)
|
|
{
|
|
return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_System System
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Configure the system clock source
|
|
* @rmtoll CFGR SW LL_RCC_SetSysClkSource
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_SYS_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_SYS_CLKSOURCE_HSE
|
|
* @arg @ref LL_RCC_SYS_CLKSOURCE_PLL
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source)
|
|
{
|
|
MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source);
|
|
}
|
|
|
|
/**
|
|
* @brief Get the system clock source
|
|
* @rmtoll CFGR SWS LL_RCC_GetSysClkSource
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI
|
|
* @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE
|
|
* @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS));
|
|
}
|
|
|
|
/**
|
|
* @brief Set AHB prescaler
|
|
* @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler
|
|
* @param Prescaler This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_1
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_2
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_4
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_8
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_16
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_64
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_128
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_256
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_512
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler)
|
|
{
|
|
MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler);
|
|
}
|
|
|
|
/**
|
|
* @brief Set APB1 prescaler
|
|
* @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler
|
|
* @param Prescaler This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_APB1_DIV_1
|
|
* @arg @ref LL_RCC_APB1_DIV_2
|
|
* @arg @ref LL_RCC_APB1_DIV_4
|
|
* @arg @ref LL_RCC_APB1_DIV_8
|
|
* @arg @ref LL_RCC_APB1_DIV_16
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler)
|
|
{
|
|
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler);
|
|
}
|
|
|
|
/**
|
|
* @brief Set APB2 prescaler
|
|
* @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler
|
|
* @param Prescaler This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_APB2_DIV_1
|
|
* @arg @ref LL_RCC_APB2_DIV_2
|
|
* @arg @ref LL_RCC_APB2_DIV_4
|
|
* @arg @ref LL_RCC_APB2_DIV_8
|
|
* @arg @ref LL_RCC_APB2_DIV_16
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler)
|
|
{
|
|
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler);
|
|
}
|
|
|
|
/**
|
|
* @brief Get AHB prescaler
|
|
* @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_1
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_2
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_4
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_8
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_16
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_64
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_128
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_256
|
|
* @arg @ref LL_RCC_SYSCLK_DIV_512
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE));
|
|
}
|
|
|
|
/**
|
|
* @brief Get APB1 prescaler
|
|
* @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_APB1_DIV_1
|
|
* @arg @ref LL_RCC_APB1_DIV_2
|
|
* @arg @ref LL_RCC_APB1_DIV_4
|
|
* @arg @ref LL_RCC_APB1_DIV_8
|
|
* @arg @ref LL_RCC_APB1_DIV_16
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1));
|
|
}
|
|
|
|
/**
|
|
* @brief Get APB2 prescaler
|
|
* @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_APB2_DIV_1
|
|
* @arg @ref LL_RCC_APB2_DIV_2
|
|
* @arg @ref LL_RCC_APB2_DIV_4
|
|
* @arg @ref LL_RCC_APB2_DIV_8
|
|
* @arg @ref LL_RCC_APB2_DIV_16
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_MCO MCO
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Configure MCOx
|
|
* @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n
|
|
* CFGR MCO1PRE LL_RCC_ConfigMCO\n
|
|
* CFGR MCO2 LL_RCC_ConfigMCO\n
|
|
* CFGR MCO2PRE LL_RCC_ConfigMCO
|
|
* @param MCOxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_MCO1SOURCE_HSI
|
|
* @arg @ref LL_RCC_MCO1SOURCE_LSE
|
|
* @arg @ref LL_RCC_MCO1SOURCE_HSE
|
|
* @arg @ref LL_RCC_MCO1SOURCE_PLLCLK
|
|
* @arg @ref LL_RCC_MCO2SOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_MCO2SOURCE_PLLI2S
|
|
* @arg @ref LL_RCC_MCO2SOURCE_HSE
|
|
* @arg @ref LL_RCC_MCO2SOURCE_PLLCLK
|
|
* @param MCOxPrescaler This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_MCO1_DIV_1
|
|
* @arg @ref LL_RCC_MCO1_DIV_2
|
|
* @arg @ref LL_RCC_MCO1_DIV_3
|
|
* @arg @ref LL_RCC_MCO1_DIV_4
|
|
* @arg @ref LL_RCC_MCO1_DIV_5
|
|
* @arg @ref LL_RCC_MCO2_DIV_1
|
|
* @arg @ref LL_RCC_MCO2_DIV_2
|
|
* @arg @ref LL_RCC_MCO2_DIV_3
|
|
* @arg @ref LL_RCC_MCO2_DIV_4
|
|
* @arg @ref LL_RCC_MCO2_DIV_5
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler)
|
|
{
|
|
MODIFY_REG(RCC->CFGR, (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U), (MCOxSource << 16U) | (MCOxPrescaler << 16U));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Configure USARTx clock source
|
|
* @rmtoll DCKCFGR2 USART1SEL LL_RCC_SetUSARTClockSource\n
|
|
* DCKCFGR2 USART2SEL LL_RCC_SetUSARTClockSource\n
|
|
* DCKCFGR2 USART3SEL LL_RCC_SetUSARTClockSource\n
|
|
* DCKCFGR2 USART6SEL LL_RCC_SetUSARTClockSource
|
|
* @param USARTxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE_PCLK2
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE_LSE
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, (USARTxSource >> 16U), (USARTxSource & 0x0000FFFFU));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure UARTx clock source
|
|
* @rmtoll DCKCFGR2 UART4SEL LL_RCC_SetUARTClockSource\n
|
|
* DCKCFGR2 UART5SEL LL_RCC_SetUARTClockSource\n
|
|
* DCKCFGR2 UART7SEL LL_RCC_SetUARTClockSource\n
|
|
* DCKCFGR2 UART8SEL LL_RCC_SetUARTClockSource
|
|
* @param UARTxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE_LSE
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetUARTClockSource(uint32_t UARTxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, (UARTxSource >> 16U), (UARTxSource & 0x0000FFFFU));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure I2Cx clock source
|
|
* @rmtoll DCKCFGR2 I2C1SEL LL_RCC_SetI2CClockSource\n
|
|
* DCKCFGR2 I2C2SEL LL_RCC_SetI2CClockSource\n
|
|
* DCKCFGR2 I2C3SEL LL_RCC_SetI2CClockSource\n
|
|
* DCKCFGR2 I2C4SEL LL_RCC_SetI2CClockSource
|
|
* @param I2CxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*)
|
|
* @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*)
|
|
* @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*)
|
|
*
|
|
* (*) value not defined in all devices.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, (I2CxSource & 0xFFFF0000U), (I2CxSource << 16U));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure LPTIMx clock source
|
|
* @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_SetLPTIMClockSource
|
|
* @param LPTIMxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, LPTIMxSource);
|
|
}
|
|
|
|
/**
|
|
* @brief Configure SAIx clock source
|
|
* @rmtoll DCKCFGR1 SAI1SEL LL_RCC_SetSAIClockSource\n
|
|
* DCKCFGR1 SAI2SEL LL_RCC_SetSAIClockSource
|
|
* @param SAIxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSRC (*)
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*)
|
|
*
|
|
* (*) value not defined in all devices.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR1, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure SDMMC clock source
|
|
* @rmtoll DCKCFGR2 SDMMC1SEL LL_RCC_SetSDMMCClockSource\n
|
|
* DCKCFGR2 SDMMC2SEL LL_RCC_SetSDMMCClockSource
|
|
* @param SDMMCxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL48CLK
|
|
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_SDMMC2_CLKSOURCE_PLL48CLK (*)
|
|
* @arg @ref LL_RCC_SDMMC2_CLKSOURCE_SYSCLK (*)
|
|
*
|
|
* (*) value not defined in all devices.
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t SDMMCxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, (SDMMCxSource & 0xFFFF0000U), (SDMMCxSource << 16U));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure 48Mhz domain clock source
|
|
* @rmtoll DCKCFGR2 CK48MSEL LL_RCC_SetCK48MClockSource
|
|
* @param CK48MxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL
|
|
* @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetCK48MClockSource(uint32_t CK48MxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, CK48MxSource);
|
|
}
|
|
|
|
/**
|
|
* @brief Configure RNG clock source
|
|
* @rmtoll DCKCFGR2 CK48MSEL LL_RCC_SetRNGClockSource
|
|
* @param RNGxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_RNG_CLKSOURCE_PLL
|
|
* @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, RNGxSource);
|
|
}
|
|
|
|
/**
|
|
* @brief Configure USB clock source
|
|
* @rmtoll DCKCFGR2 CK48MSEL LL_RCC_SetUSBClockSource
|
|
* @param USBxSource This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_USB_CLKSOURCE_PLL
|
|
* @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, USBxSource);
|
|
}
|
|
|
|
#if defined(CEC)
|
|
/**
|
|
* @brief Configure CEC clock source
|
|
* @rmtoll DCKCFGR2 CECSEL LL_RCC_SetCECClockSource
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_CEC_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t Source)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, Source);
|
|
}
|
|
#endif /* CEC */
|
|
|
|
/**
|
|
* @brief Configure I2S clock source
|
|
* @rmtoll CFGR I2SSRC LL_RCC_SetI2SClockSource
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S
|
|
* @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t Source)
|
|
{
|
|
MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, Source);
|
|
}
|
|
|
|
#if defined(DSI)
|
|
/**
|
|
* @brief Configure DSI clock source
|
|
* @rmtoll DCKCFGR2 DSISEL LL_RCC_SetDSIClockSource
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
|
|
* @arg @ref LL_RCC_DSI_CLKSOURCE_PLL
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_DSISEL, Source);
|
|
}
|
|
#endif /* DSI */
|
|
|
|
#if defined(DFSDM1_Channel0)
|
|
/**
|
|
* @brief Configure DFSDM Audio clock source
|
|
* @rmtoll DCKCFGR1 ADFSDM1SEL LL_RCC_SetDFSDMAudioClockSource
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1
|
|
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI2
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_ADFSDM1SEL, Source);
|
|
}
|
|
|
|
/**
|
|
* @brief Configure DFSDM Kernel clock source
|
|
* @rmtoll DCKCFGR1 DFSDM1SEL LL_RCC_SetDFSDMClockSource
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2
|
|
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t Source)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_DFSDM1SEL, Source);
|
|
}
|
|
#endif /* DFSDM1_Channel0 */
|
|
|
|
/**
|
|
* @brief Get USARTx clock source
|
|
* @rmtoll DCKCFGR2 USART1SEL LL_RCC_GetUSARTClockSource\n
|
|
* DCKCFGR2 USART2SEL LL_RCC_GetUSARTClockSource\n
|
|
* DCKCFGR2 USART3SEL LL_RCC_GetUSARTClockSource\n
|
|
* DCKCFGR2 USART6SEL LL_RCC_GetUSARTClockSource
|
|
* @param USARTx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_USART2_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_USART3_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE_PCLK2
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_USART6_CLKSOURCE_LSE
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, USARTx) | (USARTx << 16U));
|
|
}
|
|
|
|
/**
|
|
* @brief Get UARTx clock source
|
|
* @rmtoll DCKCFGR2 UART4SEL LL_RCC_GetUARTClockSource\n
|
|
* DCKCFGR2 UART5SEL LL_RCC_GetUARTClockSource\n
|
|
* DCKCFGR2 UART7SEL LL_RCC_GetUARTClockSource\n
|
|
* DCKCFGR2 UART8SEL LL_RCC_GetUARTClockSource
|
|
* @param UARTx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_UART7_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_UART8_CLKSOURCE_LSE
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetUARTClockSource(uint32_t UARTx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, UARTx) | (UARTx << 16U));
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2Cx clock source
|
|
* @rmtoll DCKCFGR2 I2C1SEL LL_RCC_GetI2CClockSource\n
|
|
* DCKCFGR2 I2C2SEL LL_RCC_GetI2CClockSource\n
|
|
* DCKCFGR2 I2C3SEL LL_RCC_GetI2CClockSource\n
|
|
* DCKCFGR2 I2C4SEL LL_RCC_GetI2CClockSource
|
|
* @param I2Cx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_I2C1_CLKSOURCE
|
|
* @arg @ref LL_RCC_I2C2_CLKSOURCE
|
|
* @arg @ref LL_RCC_I2C3_CLKSOURCE
|
|
* @arg @ref LL_RCC_I2C4_CLKSOURCE (*)
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*)
|
|
* @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*)
|
|
* @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*)
|
|
*
|
|
* (*) value not defined in all devices.
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx)
|
|
{
|
|
return (uint32_t)((READ_BIT(RCC->DCKCFGR2, I2Cx) >> 16U) | I2Cx);
|
|
}
|
|
|
|
/**
|
|
* @brief Get LPTIMx clock source
|
|
* @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_GetLPTIMClockSource
|
|
* @param LPTIMx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
|
|
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL));
|
|
}
|
|
|
|
/**
|
|
* @brief Get SAIx clock source
|
|
* @rmtoll DCKCFGR1 SAI1SEL LL_RCC_GetSAIClockSource\n
|
|
* DCKCFGR1 SAI2SEL LL_RCC_GetSAIClockSource
|
|
* @param SAIx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
|
|
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSRC (*)
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN
|
|
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*)
|
|
*
|
|
* (*) value not defined in all devices.
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR1, SAIx) >> 16U | SAIx);
|
|
}
|
|
|
|
/**
|
|
* @brief Get SDMMCx clock source
|
|
* @rmtoll DCKCFGR2 SDMMC1SEL LL_RCC_GetSDMMCClockSource\n
|
|
* DCKCFGR2 SDMMC2SEL LL_RCC_GetSDMMCClockSource
|
|
* @param SDMMCx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE
|
|
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE (*)
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL48CLK
|
|
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_SYSCLK
|
|
* @arg @ref LL_RCC_SDMMC2_CLKSOURCE_PLL48CLK (*)
|
|
* @arg @ref LL_RCC_SDMMC2_CLKSOURCE_SYSCLK (*)
|
|
*
|
|
* (*) value not defined in all devices.
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t SDMMCx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SDMMCx) >> 16U | SDMMCx);
|
|
}
|
|
|
|
/**
|
|
* @brief Get 48Mhz domain clock source
|
|
* @rmtoll DCKCFGR2 CK48MSEL LL_RCC_GetCK48MClockSource
|
|
* @param CK48Mx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_CK48M_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL
|
|
* @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetCK48MClockSource(uint32_t CK48Mx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CK48Mx));
|
|
}
|
|
|
|
/**
|
|
* @brief Get RNGx clock source
|
|
* @rmtoll DCKCFGR2 CK48MSEL LL_RCC_GetRNGClockSource
|
|
* @param RNGx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_RNG_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_RNG_CLKSOURCE_PLL
|
|
* @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RNGx));
|
|
}
|
|
|
|
/**
|
|
* @brief Get USBx clock source
|
|
* @rmtoll DCKCFGR2 CK48MSEL LL_RCC_GetUSBClockSource
|
|
* @param USBx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_USB_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_USB_CLKSOURCE_PLL
|
|
* @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, USBx));
|
|
}
|
|
|
|
#if defined(CEC)
|
|
/**
|
|
* @brief Get CEC Clock Source
|
|
* @rmtoll DCKCFGR2 CECSEL LL_RCC_GetCECClockSource
|
|
* @param CECx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_CEC_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_CEC_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CECx));
|
|
}
|
|
#endif /* CEC */
|
|
|
|
/**
|
|
* @brief Get I2S Clock Source
|
|
* @rmtoll CFGR I2SSRC LL_RCC_GetI2SClockSource
|
|
* @param I2Sx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_I2S1_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S
|
|
* @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->CFGR, I2Sx));
|
|
}
|
|
|
|
#if defined(DFSDM1_Channel0)
|
|
/**
|
|
* @brief Get DFSDM Audio Clock Source
|
|
* @rmtoll DCKCFGR1 ADFSDM1SEL LL_RCC_GetDFSDMAudioClockSource
|
|
* @param DFSDMx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1
|
|
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI2
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR1, DFSDMx));
|
|
}
|
|
|
|
/**
|
|
* @brief Get DFSDM Audio Clock Source
|
|
* @rmtoll DCKCFGR1 DFSDM1SEL LL_RCC_GetDFSDMClockSource
|
|
* @param DFSDMx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2
|
|
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR1, DFSDMx));
|
|
}
|
|
#endif /* DFSDM1_Channel0 */
|
|
|
|
#if defined(DSI)
|
|
/**
|
|
* @brief Get DSI Clock Source
|
|
* @rmtoll DCKCFGR2 DSISEL LL_RCC_GetDSIClockSource
|
|
* @param DSIx This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_DSI_CLKSOURCE
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
|
|
* @arg @ref LL_RCC_DSI_CLKSOURCE_PLL
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR2, DSIx));
|
|
}
|
|
#endif /* DSI */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_RTC RTC
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Set RTC Clock Source
|
|
* @note Once the RTC clock source has been selected, it cannot be changed anymore unless
|
|
* the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is
|
|
* set). The BDRST bit can be used to reset them.
|
|
* @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
|
|
* @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
|
|
* @arg @ref LL_RCC_RTC_CLKSOURCE_HSE
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source)
|
|
{
|
|
MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source);
|
|
}
|
|
|
|
/**
|
|
* @brief Get RTC Clock Source
|
|
* @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
|
|
* @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
|
|
* @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
|
|
* @arg @ref LL_RCC_RTC_CLKSOURCE_HSE
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL));
|
|
}
|
|
|
|
/**
|
|
* @brief Enable RTC
|
|
* @rmtoll BDCR RTCEN LL_RCC_EnableRTC
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_EnableRTC(void)
|
|
{
|
|
SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable RTC
|
|
* @rmtoll BDCR RTCEN LL_RCC_DisableRTC
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_DisableRTC(void)
|
|
{
|
|
CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RTC has been enabled or not
|
|
* @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void)
|
|
{
|
|
return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN));
|
|
}
|
|
|
|
/**
|
|
* @brief Force the Backup domain reset
|
|
* @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void)
|
|
{
|
|
SET_BIT(RCC->BDCR, RCC_BDCR_BDRST);
|
|
}
|
|
|
|
/**
|
|
* @brief Release the Backup domain reset
|
|
* @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void)
|
|
{
|
|
CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST);
|
|
}
|
|
|
|
/**
|
|
* @brief Set HSE Prescalers for RTC Clock
|
|
* @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler
|
|
* @param Prescaler This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_RTC_NOCLOCK
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_2
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_3
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_4
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_5
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_6
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_7
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_8
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_9
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_10
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_11
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_12
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_13
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_14
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_15
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_16
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_17
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_18
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_19
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_20
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_21
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_22
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_23
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_24
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_25
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_26
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_27
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_28
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_29
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_30
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_31
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler)
|
|
{
|
|
MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler);
|
|
}
|
|
|
|
/**
|
|
* @brief Get HSE Prescalers for RTC Clock
|
|
* @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_RTC_NOCLOCK
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_2
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_3
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_4
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_5
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_6
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_7
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_8
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_9
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_10
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_11
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_12
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_13
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_14
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_15
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_16
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_17
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_18
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_19
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_20
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_21
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_22
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_23
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_24
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_25
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_26
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_27
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_28
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_29
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_30
|
|
* @arg @ref LL_RCC_RTC_HSE_DIV_31
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Set Timers Clock Prescalers
|
|
* @rmtoll DCKCFGR1 TIMPRE LL_RCC_SetTIMPrescaler
|
|
* @param Prescaler This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_TIM_PRESCALER_TWICE
|
|
* @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler)
|
|
{
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_TIMPRE, Prescaler);
|
|
}
|
|
|
|
/**
|
|
* @brief Get Timers Clock Prescalers
|
|
* @rmtoll DCKCFGR1 TIMPRE LL_RCC_GetTIMPrescaler
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_TIM_PRESCALER_TWICE
|
|
* @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_TIMPRE));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_PLL PLL
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable PLL
|
|
* @rmtoll CR PLLON LL_RCC_PLL_Enable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLL_Enable(void)
|
|
{
|
|
SET_BIT(RCC->CR, RCC_CR_PLLON);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable PLL
|
|
* @note Cannot be disabled if the PLL clock is used as the system clock
|
|
* @rmtoll CR PLLON LL_RCC_PLL_Disable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLL_Disable(void)
|
|
{
|
|
CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if PLL Ready
|
|
* @rmtoll CR PLLRDY LL_RCC_PLL_IsReady
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void)
|
|
{
|
|
return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure PLL used for SYSCLK Domain
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLP can be written only when PLL is disabled
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n
|
|
* PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n
|
|
* PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n
|
|
* PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SYS
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLP This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLP_DIV_2
|
|
* @arg @ref LL_RCC_PLLP_DIV_4
|
|
* @arg @ref LL_RCC_PLLP_DIV_6
|
|
* @arg @ref LL_RCC_PLLP_DIV_8
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP,
|
|
Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLP);
|
|
}
|
|
|
|
/**
|
|
* @brief Configure PLL used for 48Mhz domain clock
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLQ can be written only when PLL is disabled
|
|
* @note This can be selected for USB, RNG, SDMMC1
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n
|
|
* PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n
|
|
* PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n
|
|
* PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLQ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLQ_DIV_15
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ,
|
|
Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLQ);
|
|
}
|
|
|
|
#if defined(DSI)
|
|
/**
|
|
* @brief Configure PLL used for DSI clock
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLR can be written only when PLL is disabled
|
|
* @note This can be selected for DSI
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_DSI\n
|
|
* PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_DSI\n
|
|
* PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_DSI\n
|
|
* PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_DSI
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLR This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLR_DIV_2
|
|
* @arg @ref LL_RCC_PLLR_DIV_3
|
|
* @arg @ref LL_RCC_PLLR_DIV_4
|
|
* @arg @ref LL_RCC_PLLR_DIV_5
|
|
* @arg @ref LL_RCC_PLLR_DIV_6
|
|
* @arg @ref LL_RCC_PLLR_DIV_7
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR,
|
|
Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR);
|
|
}
|
|
#endif /* DSI */
|
|
|
|
/**
|
|
* @brief Get Main PLL multiplication factor for VCO
|
|
* @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN
|
|
* @retval Between 50 and 432
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
|
|
}
|
|
|
|
/**
|
|
* @brief Get Main PLL division factor for PLLP
|
|
* @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLP_DIV_2
|
|
* @arg @ref LL_RCC_PLLP_DIV_4
|
|
* @arg @ref LL_RCC_PLLP_DIV_6
|
|
* @arg @ref LL_RCC_PLLP_DIV_8
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP));
|
|
}
|
|
|
|
/**
|
|
* @brief Get Main PLL division factor for PLLQ
|
|
* @note used for PLL48MCLK selected for USB, RNG, SDMMC (48 MHz clock)
|
|
* @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLQ_DIV_15
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ));
|
|
}
|
|
|
|
#if defined(RCC_PLLCFGR_PLLR)
|
|
/**
|
|
* @brief Get Main PLL division factor for PLLR
|
|
* @note used for PLLCLK (system clock)
|
|
* @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLR_DIV_2
|
|
* @arg @ref LL_RCC_PLLR_DIV_3
|
|
* @arg @ref LL_RCC_PLLR_DIV_4
|
|
* @arg @ref LL_RCC_PLLR_DIV_5
|
|
* @arg @ref LL_RCC_PLLR_DIV_6
|
|
* @arg @ref LL_RCC_PLLR_DIV_7
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR));
|
|
}
|
|
#endif /* RCC_PLLCFGR_PLLR */
|
|
|
|
/**
|
|
* @brief Get the oscillator used as PLL clock source.
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC));
|
|
}
|
|
|
|
/**
|
|
* @brief Get Division factor for the main PLL and other PLL
|
|
* @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure Spread Spectrum used for PLL
|
|
* @note These bits must be written before enabling PLL
|
|
* @rmtoll SSCGR MODPER LL_RCC_PLL_ConfigSpreadSpectrum\n
|
|
* SSCGR INCSTEP LL_RCC_PLL_ConfigSpreadSpectrum\n
|
|
* SSCGR SPREADSEL LL_RCC_PLL_ConfigSpreadSpectrum
|
|
* @param Mod Between Min_Data=0 and Max_Data=8191
|
|
* @param Inc Between Min_Data=0 and Max_Data=32767
|
|
* @param Sel This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_SPREAD_SELECT_CENTER
|
|
* @arg @ref LL_RCC_SPREAD_SELECT_DOWN
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLL_ConfigSpreadSpectrum(uint32_t Mod, uint32_t Inc, uint32_t Sel)
|
|
{
|
|
MODIFY_REG(RCC->SSCGR, RCC_SSCGR_MODPER | RCC_SSCGR_INCSTEP | RCC_SSCGR_SPREADSEL, Mod | (Inc << RCC_SSCGR_INCSTEP_Pos) | Sel);
|
|
}
|
|
|
|
/**
|
|
* @brief Get Spread Spectrum Modulation Period for PLL
|
|
* @rmtoll SSCGR MODPER LL_RCC_PLL_GetPeriodModulation
|
|
* @retval Between Min_Data=0 and Max_Data=8191
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetPeriodModulation(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_MODPER));
|
|
}
|
|
|
|
/**
|
|
* @brief Get Spread Spectrum Incrementation Step for PLL
|
|
* @note Must be written before enabling PLL
|
|
* @rmtoll SSCGR INCSTEP LL_RCC_PLL_GetStepIncrementation
|
|
* @retval Between Min_Data=0 and Max_Data=32767
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetStepIncrementation(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_INCSTEP) >> RCC_SSCGR_INCSTEP_Pos);
|
|
}
|
|
|
|
/**
|
|
* @brief Get Spread Spectrum Selection for PLL
|
|
* @note Must be written before enabling PLL
|
|
* @rmtoll SSCGR SPREADSEL LL_RCC_PLL_GetSpreadSelection
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_SPREAD_SELECT_CENTER
|
|
* @arg @ref LL_RCC_SPREAD_SELECT_DOWN
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLL_GetSpreadSelection(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_SPREADSEL));
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Spread Spectrum for PLL.
|
|
* @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Enable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Enable(void)
|
|
{
|
|
SET_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Spread Spectrum for PLL.
|
|
* @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Disable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Disable(void)
|
|
{
|
|
CLEAR_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_PLLI2S PLLI2S
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable PLLI2S
|
|
* @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Enable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLI2S_Enable(void)
|
|
{
|
|
SET_BIT(RCC->CR, RCC_CR_PLLI2SON);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable PLLI2S
|
|
* @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Disable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLI2S_Disable(void)
|
|
{
|
|
CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if PLLI2S Ready
|
|
* @rmtoll CR PLLI2SRDY LL_RCC_PLLI2S_IsReady
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLI2S_IsReady(void)
|
|
{
|
|
return (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) == (RCC_CR_PLLI2SRDY));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure PLLI2S used for SAI1 and SAI2 domain clock
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLQ can be written only when PLLI2S is disabled
|
|
* @note This can be selected for SAI1 and SAI2
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n
|
|
* PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SAI\n
|
|
* PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SAI\n
|
|
* PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_SAI\n
|
|
* DCKCFGR1 PLLI2SDIVQ LL_RCC_PLLI2S_ConfigDomain_SAI
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLQ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_15
|
|
* @param PLLDIVQ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ, uint32_t PLLDIVQ)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
|
|
MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SQ, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLQ);
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ, PLLDIVQ);
|
|
}
|
|
|
|
#if defined(SPDIFRX)
|
|
/**
|
|
* @brief Configure PLLI2S used for SPDIFRX domain clock
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLP can be written only when PLLI2S is disabled
|
|
* @note This can be selected for SPDIFRX
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n
|
|
* PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n
|
|
* PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n
|
|
* PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_ConfigDomain_SPDIFRX
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLP This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_8
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
|
|
MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SP, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLP);
|
|
}
|
|
#endif /* SPDIFRX */
|
|
|
|
/**
|
|
* @brief Configure PLLI2S used for I2S1 domain clock
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLR can be written only when PLLI2S is disabled
|
|
* @note This can be selected for I2S
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n
|
|
* PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_I2S\n
|
|
* PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_I2S\n
|
|
* PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_I2S
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLR This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_7
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
|
|
MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SR, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLR);
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2SPLL multiplication factor for VCO
|
|
* @rmtoll PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_GetN
|
|
* @retval Between 50 and 432
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetN(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos);
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2SPLL division factor for PLLI2SQ
|
|
* @rmtoll PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_GetQ
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLI2SQ_DIV_15
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetQ(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ));
|
|
}
|
|
|
|
/**
|
|
* @brief Get I2SPLL division factor for PLLI2SR
|
|
* @note used for PLLI2SCLK (I2S clock)
|
|
* @rmtoll PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_GetR
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SR_DIV_7
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetR(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR));
|
|
}
|
|
|
|
#if defined(RCC_PLLI2SCFGR_PLLI2SP)
|
|
/**
|
|
* @brief Get I2SPLL division factor for PLLI2SP
|
|
* @note used for PLLSPDIFRXCLK (SPDIFRX clock)
|
|
* @rmtoll PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_GetP
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SP_DIV_8
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetP(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SP));
|
|
}
|
|
#endif /* RCC_PLLI2SCFGR_PLLI2SP */
|
|
|
|
/**
|
|
* @brief Get I2SPLL division factor for PLLI2SDIVQ
|
|
* @note used PLLSAI1CLK, PLLSAI2CLK selected (SAI1 and SAI2 clock)
|
|
* @rmtoll DCKCFGR1 PLLI2SDIVQ LL_RCC_PLLI2S_GetDIVQ
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31
|
|
* @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVQ(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_PLLSAI PLLSAI
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable PLLSAI
|
|
* @rmtoll CR PLLSAION LL_RCC_PLLSAI_Enable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLSAI_Enable(void)
|
|
{
|
|
SET_BIT(RCC->CR, RCC_CR_PLLSAION);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable PLLSAI
|
|
* @rmtoll CR PLLSAION LL_RCC_PLLSAI_Disable
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLSAI_Disable(void)
|
|
{
|
|
CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if PLLSAI Ready
|
|
* @rmtoll CR PLLSAIRDY LL_RCC_PLLSAI_IsReady
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLSAI_IsReady(void)
|
|
{
|
|
return (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) == (RCC_CR_PLLSAIRDY));
|
|
}
|
|
|
|
/**
|
|
* @brief Configure PLLSAI used for SAI1 and SAI2 domain clock
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLQ can be written only when PLLSAI is disabled
|
|
* @note This can be selected for SAI1 and SAI2
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_SAI\n
|
|
* PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_SAI\n
|
|
* PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_SAI\n
|
|
* PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_ConfigDomain_SAI\n
|
|
* DCKCFGR1 PLLSAIDIVQ LL_RCC_PLLSAI_ConfigDomain_SAI
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLQ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_15
|
|
* @param PLLDIVQ This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ, uint32_t PLLDIVQ)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
|
|
MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIQ, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLQ);
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ, PLLDIVQ);
|
|
}
|
|
|
|
/**
|
|
* @brief Configure PLLSAI used for 48Mhz domain clock
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLP can be written only when PLLSAI is disabled
|
|
* @note This can be selected for USB, RNG, SDMMC1
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_48M\n
|
|
* PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_48M\n
|
|
* PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_48M\n
|
|
* PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_ConfigDomain_48M
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLP This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_8
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
|
|
MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIP, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLP);
|
|
}
|
|
|
|
#if defined(LTDC)
|
|
/**
|
|
* @brief Configure PLLSAI used for LTDC domain clock
|
|
* @note PLL Source and PLLM Divider can be written only when PLL,
|
|
* PLLI2S and PLLSAI are disabled
|
|
* @note PLLN/PLLR can be written only when PLLSAI is disabled
|
|
* @note This can be selected for LTDC
|
|
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_LTDC\n
|
|
* PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_LTDC\n
|
|
* PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_LTDC\n
|
|
* PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_ConfigDomain_LTDC\n
|
|
* DCKCFGR1 PLLSAIDIVR LL_RCC_PLLSAI_ConfigDomain_LTDC
|
|
* @param Source This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSI
|
|
* @arg @ref LL_RCC_PLLSOURCE_HSE
|
|
* @param PLLM This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLM_DIV_2
|
|
* @arg @ref LL_RCC_PLLM_DIV_3
|
|
* @arg @ref LL_RCC_PLLM_DIV_4
|
|
* @arg @ref LL_RCC_PLLM_DIV_5
|
|
* @arg @ref LL_RCC_PLLM_DIV_6
|
|
* @arg @ref LL_RCC_PLLM_DIV_7
|
|
* @arg @ref LL_RCC_PLLM_DIV_8
|
|
* @arg @ref LL_RCC_PLLM_DIV_9
|
|
* @arg @ref LL_RCC_PLLM_DIV_10
|
|
* @arg @ref LL_RCC_PLLM_DIV_11
|
|
* @arg @ref LL_RCC_PLLM_DIV_12
|
|
* @arg @ref LL_RCC_PLLM_DIV_13
|
|
* @arg @ref LL_RCC_PLLM_DIV_14
|
|
* @arg @ref LL_RCC_PLLM_DIV_15
|
|
* @arg @ref LL_RCC_PLLM_DIV_16
|
|
* @arg @ref LL_RCC_PLLM_DIV_17
|
|
* @arg @ref LL_RCC_PLLM_DIV_18
|
|
* @arg @ref LL_RCC_PLLM_DIV_19
|
|
* @arg @ref LL_RCC_PLLM_DIV_20
|
|
* @arg @ref LL_RCC_PLLM_DIV_21
|
|
* @arg @ref LL_RCC_PLLM_DIV_22
|
|
* @arg @ref LL_RCC_PLLM_DIV_23
|
|
* @arg @ref LL_RCC_PLLM_DIV_24
|
|
* @arg @ref LL_RCC_PLLM_DIV_25
|
|
* @arg @ref LL_RCC_PLLM_DIV_26
|
|
* @arg @ref LL_RCC_PLLM_DIV_27
|
|
* @arg @ref LL_RCC_PLLM_DIV_28
|
|
* @arg @ref LL_RCC_PLLM_DIV_29
|
|
* @arg @ref LL_RCC_PLLM_DIV_30
|
|
* @arg @ref LL_RCC_PLLM_DIV_31
|
|
* @arg @ref LL_RCC_PLLM_DIV_32
|
|
* @arg @ref LL_RCC_PLLM_DIV_33
|
|
* @arg @ref LL_RCC_PLLM_DIV_34
|
|
* @arg @ref LL_RCC_PLLM_DIV_35
|
|
* @arg @ref LL_RCC_PLLM_DIV_36
|
|
* @arg @ref LL_RCC_PLLM_DIV_37
|
|
* @arg @ref LL_RCC_PLLM_DIV_38
|
|
* @arg @ref LL_RCC_PLLM_DIV_39
|
|
* @arg @ref LL_RCC_PLLM_DIV_40
|
|
* @arg @ref LL_RCC_PLLM_DIV_41
|
|
* @arg @ref LL_RCC_PLLM_DIV_42
|
|
* @arg @ref LL_RCC_PLLM_DIV_43
|
|
* @arg @ref LL_RCC_PLLM_DIV_44
|
|
* @arg @ref LL_RCC_PLLM_DIV_45
|
|
* @arg @ref LL_RCC_PLLM_DIV_46
|
|
* @arg @ref LL_RCC_PLLM_DIV_47
|
|
* @arg @ref LL_RCC_PLLM_DIV_48
|
|
* @arg @ref LL_RCC_PLLM_DIV_49
|
|
* @arg @ref LL_RCC_PLLM_DIV_50
|
|
* @arg @ref LL_RCC_PLLM_DIV_51
|
|
* @arg @ref LL_RCC_PLLM_DIV_52
|
|
* @arg @ref LL_RCC_PLLM_DIV_53
|
|
* @arg @ref LL_RCC_PLLM_DIV_54
|
|
* @arg @ref LL_RCC_PLLM_DIV_55
|
|
* @arg @ref LL_RCC_PLLM_DIV_56
|
|
* @arg @ref LL_RCC_PLLM_DIV_57
|
|
* @arg @ref LL_RCC_PLLM_DIV_58
|
|
* @arg @ref LL_RCC_PLLM_DIV_59
|
|
* @arg @ref LL_RCC_PLLM_DIV_60
|
|
* @arg @ref LL_RCC_PLLM_DIV_61
|
|
* @arg @ref LL_RCC_PLLM_DIV_62
|
|
* @arg @ref LL_RCC_PLLM_DIV_63
|
|
* @param PLLN Between 50 and 432
|
|
* @param PLLR This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_7
|
|
* @param PLLDIVR This parameter can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_16
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR)
|
|
{
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
|
|
MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIR, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLR);
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR, PLLDIVR);
|
|
}
|
|
#endif /* LTDC */
|
|
|
|
/**
|
|
* @brief Get SAIPLL multiplication factor for VCO
|
|
* @rmtoll PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_GetN
|
|
* @retval Between 50 and 432
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetN(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos);
|
|
}
|
|
|
|
/**
|
|
* @brief Get SAIPLL division factor for PLLSAIQ
|
|
* @rmtoll PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_GetQ
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLSAIQ_DIV_15
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetQ(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIQ));
|
|
}
|
|
|
|
#if defined(RCC_PLLSAICFGR_PLLSAIR)
|
|
/**
|
|
* @brief Get SAIPLL division factor for PLLSAIR
|
|
* @note used for PLLSAICLK (SAI clock)
|
|
* @rmtoll PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_GetR
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIR_DIV_7
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetR(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIR));
|
|
}
|
|
#endif /* RCC_PLLSAICFGR_PLLSAIR */
|
|
|
|
/**
|
|
* @brief Get SAIPLL division factor for PLLSAIP
|
|
* @note used for PLL48MCLK (48M domain clock)
|
|
* @rmtoll PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_GetP
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIP_DIV_8
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetP(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIP));
|
|
}
|
|
|
|
/**
|
|
* @brief Get SAIPLL division factor for PLLSAIDIVQ
|
|
* @note used PLLSAI1CLK, PLLSAI2CLK selected (SAI1 and SAI2 clock)
|
|
* @rmtoll DCKCFGR1 PLLSAIDIVQ LL_RCC_PLLSAI_GetDIVQ
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31
|
|
* @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVQ(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ));
|
|
}
|
|
|
|
#if defined(RCC_DCKCFGR1_PLLSAIDIVR)
|
|
/**
|
|
* @brief Get SAIPLL division factor for PLLSAIDIVR
|
|
* @note used for LTDC domain clock
|
|
* @rmtoll DCKCFGR1 PLLSAIDIVR LL_RCC_PLLSAI_GetDIVR
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_2
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_4
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_8
|
|
* @arg @ref LL_RCC_PLLSAIDIVR_DIV_16
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVR(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR));
|
|
}
|
|
#endif /* RCC_DCKCFGR1_PLLSAIDIVR */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Clear LSI ready interrupt flag
|
|
* @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear LSE ready interrupt flag
|
|
* @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_LSERDYC);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear HSI ready interrupt flag
|
|
* @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear HSE ready interrupt flag
|
|
* @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_HSERDYC);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear PLL ready interrupt flag
|
|
* @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear PLLI2S ready interrupt flag
|
|
* @rmtoll CIR PLLI2SRDYC LL_RCC_ClearFlag_PLLI2SRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearFlag_PLLI2SRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear PLLSAI ready interrupt flag
|
|
* @rmtoll CIR PLLSAIRDYC LL_RCC_ClearFlag_PLLSAIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAIRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear Clock security system interrupt flag
|
|
* @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_CSSC);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if LSI ready interrupt occurred or not
|
|
* @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if LSE ready interrupt occurred or not
|
|
* @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if HSI ready interrupt occurred or not
|
|
* @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if HSE ready interrupt occurred or not
|
|
* @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if PLL ready interrupt occurred or not
|
|
* @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if PLLI2S ready interrupt occurred or not
|
|
* @rmtoll CIR PLLI2SRDYF LL_RCC_IsActiveFlag_PLLI2SRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLI2SRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYF) == (RCC_CIR_PLLI2SRDYF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if PLLSAI ready interrupt occurred or not
|
|
* @rmtoll CIR PLLSAIRDYF LL_RCC_IsActiveFlag_PLLSAIRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAIRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYF) == (RCC_CIR_PLLSAIRDYF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if Clock security system interrupt occurred or not
|
|
* @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RCC flag Independent Watchdog reset is set or not.
|
|
* @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void)
|
|
{
|
|
return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RCC flag Low Power reset is set or not.
|
|
* @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void)
|
|
{
|
|
return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RCC flag Pin reset is set or not.
|
|
* @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void)
|
|
{
|
|
return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RCC flag POR/PDR reset is set or not.
|
|
* @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void)
|
|
{
|
|
return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RCC flag Software reset is set or not.
|
|
* @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void)
|
|
{
|
|
return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RCC flag Window Watchdog reset is set or not.
|
|
* @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void)
|
|
{
|
|
return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF));
|
|
}
|
|
|
|
/**
|
|
* @brief Check if RCC flag BOR reset is set or not.
|
|
* @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void)
|
|
{
|
|
return (READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == (RCC_CSR_BORRSTF));
|
|
}
|
|
|
|
/**
|
|
* @brief Set RMVF bit to clear the reset flags.
|
|
* @rmtoll CSR RMVF LL_RCC_ClearResetFlags
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_ClearResetFlags(void)
|
|
{
|
|
SET_BIT(RCC->CSR, RCC_CSR_RMVF);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_IT_Management IT Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable LSI ready interrupt
|
|
* @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable LSE ready interrupt
|
|
* @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable HSI ready interrupt
|
|
* @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable HSE ready interrupt
|
|
* @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable PLL ready interrupt
|
|
* @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable PLLI2S ready interrupt
|
|
* @rmtoll CIR PLLI2SRDYIE LL_RCC_EnableIT_PLLI2SRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_EnableIT_PLLI2SRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable PLLSAI ready interrupt
|
|
* @rmtoll CIR PLLSAIRDYIE LL_RCC_EnableIT_PLLSAIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_EnableIT_PLLSAIRDY(void)
|
|
{
|
|
SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable LSI ready interrupt
|
|
* @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void)
|
|
{
|
|
CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable LSE ready interrupt
|
|
* @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void)
|
|
{
|
|
CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable HSI ready interrupt
|
|
* @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void)
|
|
{
|
|
CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable HSE ready interrupt
|
|
* @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void)
|
|
{
|
|
CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable PLL ready interrupt
|
|
* @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void)
|
|
{
|
|
CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable PLLI2S ready interrupt
|
|
* @rmtoll CIR PLLI2SRDYIE LL_RCC_DisableIT_PLLI2SRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_DisableIT_PLLI2SRDY(void)
|
|
{
|
|
CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable PLLSAI ready interrupt
|
|
* @rmtoll CIR PLLSAIRDYIE LL_RCC_DisableIT_PLLSAIRDY
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_RCC_DisableIT_PLLSAIRDY(void)
|
|
{
|
|
CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE);
|
|
}
|
|
|
|
/**
|
|
* @brief Checks if LSI ready interrupt source is enabled or disabled.
|
|
* @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE));
|
|
}
|
|
|
|
/**
|
|
* @brief Checks if LSE ready interrupt source is enabled or disabled.
|
|
* @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE));
|
|
}
|
|
|
|
/**
|
|
* @brief Checks if HSI ready interrupt source is enabled or disabled.
|
|
* @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE));
|
|
}
|
|
|
|
/**
|
|
* @brief Checks if HSE ready interrupt source is enabled or disabled.
|
|
* @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE));
|
|
}
|
|
|
|
/**
|
|
* @brief Checks if PLL ready interrupt source is enabled or disabled.
|
|
* @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE));
|
|
}
|
|
|
|
/**
|
|
* @brief Checks if PLLI2S ready interrupt source is enabled or disabled.
|
|
* @rmtoll CIR PLLI2SRDYIE LL_RCC_IsEnabledIT_PLLI2SRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLI2SRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE) == (RCC_CIR_PLLI2SRDYIE));
|
|
}
|
|
|
|
/**
|
|
* @brief Checks if PLLSAI ready interrupt source is enabled or disabled.
|
|
* @rmtoll CIR PLLSAIRDYIE LL_RCC_IsEnabledIT_PLLSAIRDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAIRDY(void)
|
|
{
|
|
return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE) == (RCC_CIR_PLLSAIRDYIE));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup RCC_LL_EF_Init De-initialization function
|
|
* @{
|
|
*/
|
|
ErrorStatus LL_RCC_DeInit(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions
|
|
* @{
|
|
*/
|
|
void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks);
|
|
uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource);
|
|
uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource);
|
|
uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource);
|
|
uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource);
|
|
uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource);
|
|
uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource);
|
|
uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource);
|
|
uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource);
|
|
#if defined(DFSDM1_Channel0)
|
|
uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource);
|
|
uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource);
|
|
#endif /* DFSDM1_Channel0 */
|
|
uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource);
|
|
#if defined(CEC)
|
|
uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource);
|
|
#endif /* CEC */
|
|
#if defined(LTDC)
|
|
uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource);
|
|
#endif /* LTDC */
|
|
#if defined(SPDIFRX)
|
|
uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource);
|
|
#endif /* SPDIFRX */
|
|
#if defined(DSI)
|
|
uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource);
|
|
#endif /* DSI */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* defined(RCC) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F7xx_LL_RCC_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|