1
0
Fork 0
gadget-tester/system.h
2019-11-22 11:12:54 +01:00

503 Zeilen
19 KiB
C

#ifndef SYSTEM_H_INCLUDED
#define SYSTEM_H_INCLUDED
#include <stdint.h>
/* System specific: PLL with 8 MHz external oscillator, CPU at 168MHz */
#define PLL_FULL_MASK (0x7F037FFF)
extern uint32_t cpu_freq;
void panic(void);
void printbin(const uint8_t *buf, int len); /* Defined in uart.c */
extern int _mutex_lock(void *); /* defined in mutex.S */
extern int _mutex_unlock(void *);
/* PIN CONFIG TARGET */
#define LED 5 // PA5
#define SPI_FLASH_PIN 4 /* Flash CS connected to GPIOA4 */
#define SPI1_PIN_AF 5
#define SPI1_CLOCK_PIN 5
#define SPI1_MISO_PIN 6
#define SPI1_MOSI_PIN 7
#define SPI2_PIN_AF 5
#define SPI2_CLOCK_PIN 13
#define SPI2_MISO_PIN 14
#define SPI2_MOSI_PIN 15
#define I2C1_PIN_AF 4
#define I2C1_SDA 9 /* GPIOB P9 */
#define I2C1_SCL 8 /* GPIOB P8 */
#define GPIO_MODE_AF (2)
/* STM32 specific defines */
#define APB1_CLOCK_ER (*(volatile uint32_t *)(0x40023840))
#define APB1_CLOCK_RST (*(volatile uint32_t *)(0x40023820))
#define TIM2_APB1_CLOCK_ER_VAL (1 << 0)
#define TIM4_APB1_CLOCK_ER_VAL (1 << 2)
#define PWR_APB1_CLOCK_ER_VAL (1 << 28)
#define SPI2_APB1_CLOCK_ER_VAL (1 << 14)
#define APB2_CLOCK_ER (*(volatile uint32_t *)(0x40023844))
#define APB2_CLOCK_RST (*(volatile uint32_t *)(0x40023824))
#define SYSCFG_APB2_CLOCK_ER (1 << 14)
#define SPI1_APB2_CLOCK_ER_VAL (1 << 12)
#define SDIO_APB2_CLOCK_ER_VAL (1 << 11)
#define ADC1_APB2_CLOCK_ER_VAL (1 << 8)
#define RCC_BACKUP (*(volatile uint32_t *)(0x40023870))
#define RCC_BACKUP_RESET (1 << 16)
#define RCC_BACKUP_RTCEN (1 << 15)
#define RCC_BACKUP_RTCSEL_SHIFT 8
#define RCC_BACKUP_RTCSEL_MASK 0x3
#define RCC_BACKUP_RTCSEL_NONE 0
#define RCC_BACKUP_RTCSEL_LSE 1
#define RCC_BACKUP_RTCSEL_LSI 2
#define RCC_BACKUP_RTCSEL_HSE 3
#define RCC_BACKUP_LSEMOD (1 << 3)
#define RCC_BACKUP_LSEBYP (1 << 2)
#define RCC_BACKUP_LSERDY (1 << 1)
#define RCC_BACKUP_LSEON (1 << 0)
#define RCC_CSR_LSION (1 << 0)
#define RCC_CSR_LSIRDY (1 << 1)
/* EXTI */
#define EXTI_CR_BASE (0x40013808)
#define EXTI_CR0 (*(volatile uint32_t *)(EXTI_CR_BASE + 0x00))
#define EXTI_CR_EXTI0_MASK (0xFFFF)
#define EXTI_IMR (*(volatile uint32_t *)(EXTI_BASE + 0x00))
#define EXTI_EMR (*(volatile uint32_t *)(EXTI_BASE + 0x04))
#define EXTI_RTSR (*(volatile uint32_t *)(EXTI_BASE + 0x08))
#define EXTI_FTSR (*(volatile uint32_t *)(EXTI_BASE + 0x0c))
#define EXTI_SWIER (*(volatile uint32_t *)(EXTI_BASE + 0x10))
#define EXTI_PR (*(volatile uint32_t *)(EXTI_BASE + 0x14))
/* HW RNG */
#define RNG_BASE (0x50060800)
#define RNG_CR (*(volatile uint32_t *)(RNG_BASE + 0x00))
#define RNG_SR (*(volatile uint32_t *)(RNG_BASE + 0x04))
#define RNG_DR (*(volatile uint32_t *)(RNG_BASE + 0x08))
#define RNG_CR_IE (1 << 3)
#define RNG_CR_RNGEN (1 << 2)
#define RNG_SR_DRDY (1 << 0)
#define RNG_SR_CECS (1 << 1)
#define RNG_SR_SECS (1 << 2)
/* SCB for sleep configuration */
#define SCB_SCR (*(volatile uint32_t *)(0xE000ED10))
#define SCB_SCR_SEVONPEND (1 << 4)
#define SCB_SCR_SLEEPDEEP (1 << 2)
#define SCB_SCR_SLEEPONEXIT (1 << 1)
/* Assembly helpers */
#define DMB() __asm__ volatile ("dmb")
#define WFI() __asm__ volatile ("wfi")
#define WFE() __asm__ volatile ("wfe")
#define SEV() __asm__ volatile ("sev")
/* Master clock setting */
void clock_pll_on(void);
void clock_pll_off(void);
/* NVIC */
/* NVIC ISER Base register (Cortex-M) */
#define NVIC_RTC_IRQ (3)
#define NVIC_TIM2_IRQN (28)
#define NVIC_ISER_BASE (0xE000E100)
#define NVIC_ICER_BASE (0xE000E180)
#define NVIC_ICPR_BASE (0xE000E280)
#define NVIC_IPRI_BASE (0xE000E400)
#define NVIC_EXTI0_IRQ (6)
#define NVIC_EXTI9_5_IRQ (23)
#define NVIC_EXTI15_10_IRQ (40)
static inline void nvic_irq_enable(uint8_t n)
{
int i = n / 32;
volatile uint32_t *nvic_iser = ((volatile uint32_t *)(NVIC_ISER_BASE + 4 * i));
*nvic_iser |= (1 << (n % 32));
}
static inline void nvic_irq_disable(uint8_t n)
{
int i = n / 32;
volatile uint32_t *nvic_icer = ((volatile uint32_t *)(NVIC_ICER_BASE + 4 * i));
*nvic_icer |= (1 << (n % 32));
}
static inline void nvic_irq_setprio(uint8_t n, uint8_t prio)
{
volatile uint8_t *nvic_ipri = ((volatile uint8_t *)(NVIC_IPRI_BASE + n));
*nvic_ipri = prio;
}
static inline void nvic_irq_clear(uint8_t n)
{
int i = n / 32;
volatile uint8_t *nvic_icpr = ((volatile uint8_t *)(NVIC_ICPR_BASE + 4 * i));
*nvic_icpr = (1 << (n % 32));
}
/*** FLASH ***/
#define FLASH_BASE (0x40023C00)
#define FLASH_ACR (*(volatile uint32_t *)(FLASH_BASE + 0x00))
#define FLASH_ACR_ENABLE_DATA_CACHE (1 << 10)
#define FLASH_ACR_ENABLE_INST_CACHE (1 << 9)
/*** SPI ***/
#define SPI1 (0x40013000)
#define SPI1_CR1 (*(volatile uint32_t *)(SPI1))
#define SPI1_CR2 (*(volatile uint32_t *)(SPI1 + 0x04))
#define SPI1_SR (*(volatile uint32_t *)(SPI1 + 0x08))
#define SPI1_DR (*(volatile uint32_t *)(SPI1 + 0x0c))
#define SPI2 (0x40003800)
#define SPI2_CR1 (*(volatile uint32_t *)(SPI2))
#define SPI2_CR2 (*(volatile uint32_t *)(SPI2 + 0x04))
#define SPI2_SR (*(volatile uint32_t *)(SPI2 + 0x08))
#define SPI2_DR (*(volatile uint32_t *)(SPI2 + 0x0c))
#define SPI_CR1_CLOCK_PHASE (1 << 0)
#define SPI_CR1_CLOCK_POLARITY (1 << 1)
#define SPI_CR1_MASTER (1 << 2)
#define SPI_CR1_BAUDRATE (0x07 << 3)
#define SPI_CR1_SPI_EN (1 << 6)
#define SPI_CR1_LSBFIRST (1 << 7)
#define SPI_CR1_SSI (1 << 8)
#define SPI_CR1_SSM (1 << 9)
#define SPI_CR1_16BIT_FORMAT (1 << 11)
#define SPI_CR1_TX_CRC_NEXT (1 << 12)
#define SPI_CR1_HW_CRC_EN (1 << 13)
#define SPI_CR1_BIDIOE (1 << 14)
#define SPI_CR2_SSOE (1 << 2)
#define SPI_SR_RX_NOTEMPTY (1 << 0)
#define SPI_SR_TX_EMPTY (1 << 1)
#define SPI_SR_BUSY (1 << 7)
/*** RCC ***/
#define RCC_CR_PLLRDY (1 << 25)
#define RCC_CR_PLLON (1 << 24)
#define RCC_CR_HSERDY (1 << 17)
#define RCC_CR_HSEON (1 << 16)
#define RCC_CR_HSIRDY (1 << 1)
#define RCC_CR_HSION (1 << 0)
#define RCC_CFGR_SW_HSI 0x0
#define RCC_CFGR_SW_HSE 0x1
#define RCC_CFGR_SW_PLL 0x2
#define RCC_PRESCALER_DIV_NONE 0
#define RCC_PRESCALER_DIV_2 8
#define RCC_PRESCALER_DIV_4 9
#define RCC_PLLCFGR_PLLSRC (1 << 22)
#define AHB1_CLOCK_ER (*(volatile uint32_t *)(0x40023830))
#define GPIOA_AHB1_CLOCK_ER (1 << 0)
#define GPIOB_AHB1_CLOCK_ER (1 << 1)
#define GPIOC_AHB1_CLOCK_ER (1 << 2)
#define GPIOD_AHB1_CLOCK_ER (1 << 3)
#define GPIOE_AHB1_CLOCK_ER (1 << 4)
#define GPIOA_BASE 0x40020000
#define GPIOB_BASE 0x40020400
#define GPIOC_BASE 0x40020800
#define GPIOD_BASE 0x40020C00
#define GPIOE_BASE 0x40021000
#define AHB2_CLOCK_ER (*(volatile uint32_t *)(0x40023834))
#define RNG_AHB2_CLOCK_ER (1 << 6)
/* POWER CONTROL REGISTER */
#define POW_BASE (0x40007000)
#define POW_CR (*(volatile uint32_t *)(POW_BASE + 0x00))
#define POW_SCR (*(volatile uint32_t *)(POW_BASE + 0x04))
#define POW_CR_VOS (1 << 14)
#define POW_CR_FPDS (1 << 9)
#define POW_CR_DPB (1 << 8)
#define POW_CR_CSBF (1 << 3)
#define POW_CR_CWUF (1 << 2)
#define POW_CR_PDDS (1 << 1)
#define POW_CR_LPDS (1 << 0)
#define POW_SCR_BRE (1 << 9)
#define POW_SCR_EWUP (1 << 4)
#define POW_SCR_BRR (1 << 3)
#define POW_SCR_WUF (1 << 0)
/* GPIOS */
#define GPIOA_MODE (*(volatile uint32_t *)(GPIOA_BASE + 0x00))
#define GPIOA_AFL (*(volatile uint32_t *)(GPIOA_BASE + 0x20))
#define GPIOA_AFH (*(volatile uint32_t *)(GPIOA_BASE + 0x24))
#define GPIOA_OSPD (*(volatile uint32_t *)(GPIOA_BASE + 0x08))
#define GPIOA_PUPD (*(volatile uint32_t *)(GPIOA_BASE + 0x0c))
#define GPIOA_BSRR (*(volatile uint32_t *)(GPIOA_BASE + 0x18))
#define GPIOA_ODR (*(volatile uint32_t *)(GPIOA_BASE + 0x14))
#define GPIOA_IDR (*(volatile uint32_t *)(GPIOA_BASE + 0x10))
#define GPIOB_MODE (*(volatile uint32_t *)(GPIOB_BASE + 0x00))
#define GPIOB_AFL (*(volatile uint32_t *)(GPIOB_BASE + 0x20))
#define GPIOB_AFH (*(volatile uint32_t *)(GPIOB_BASE + 0x24))
#define GPIOB_OSPD (*(volatile uint32_t *)(GPIOB_BASE + 0x08))
#define GPIOB_PUPD (*(volatile uint32_t *)(GPIOB_BASE + 0x0c))
#define GPIOB_BSRR (*(volatile uint32_t *)(GPIOB_BASE + 0x18))
#define GPIOB_ODR (*(volatile uint32_t *)(GPIOB_BASE + 0x14))
#define GPIOC_MODE (*(volatile uint32_t *)(GPIOC_BASE + 0x00))
#define GPIOC_OTYPE (*(volatile uint32_t *)(GPIOC_BASE + 0x04))
#define GPIOC_OSPEED (*(volatile uint32_t *)(GPIOC_BASE + 0x08))
#define GPIOC_AFL (*(volatile uint32_t *)(GPIOC_BASE + 0x20))
#define GPIOC_AFH (*(volatile uint32_t *)(GPIOC_BASE + 0x24))
#define GPIOC_OSPD (*(volatile uint32_t *)(GPIOC_BASE + 0x08))
#define GPIOC_PUPD (*(volatile uint32_t *)(GPIOC_BASE + 0x0c))
#define GPIOC_BSRR (*(volatile uint32_t *)(GPIOC_BASE + 0x18))
#define GPIOC_ODR (*(volatile uint32_t *)(GPIOC_BASE + 0x14))
#define GPIOD_MODE (*(volatile uint32_t *)(GPIOD_BASE + 0x00))
#define GPIOD_OTYPE (*(volatile uint32_t *)(GPIOD_BASE + 0x04))
#define GPIOD_OSPEED (*(volatile uint32_t *)(GPIOD_BASE + 0x08))
#define GPIOD_AFL (*(volatile uint32_t *)(GPIOD_BASE + 0x20))
#define GPIOD_AFH (*(volatile uint32_t *)(GPIOD_BASE + 0x24))
#define GPIOD_OSPD (*(volatile uint32_t *)(GPIOD_BASE + 0x08))
#define GPIOD_PUPD (*(volatile uint32_t *)(GPIOD_BASE + 0x0c))
#define GPIOD_BSRR (*(volatile uint32_t *)(GPIOD_BASE + 0x18))
#define GPIOD_ODR (*(volatile uint32_t *)(GPIOD_BASE + 0x14))
#define GPIOE_MODE (*(volatile uint32_t *)(GPIOE_BASE + 0x00))
#define GPIOE_AFL (*(volatile uint32_t *)(GPIOE_BASE + 0x20))
#define GPIOE_AFH (*(volatile uint32_t *)(GPIOE_BASE + 0x24))
#define GPIOE_OSPD (*(volatile uint32_t *)(GPIOE_BASE + 0x08))
#define GPIOE_PUPD (*(volatile uint32_t *)(GPIOE_BASE + 0x0c))
#define GPIOE_BSRR (*(volatile uint32_t *)(GPIOE_BASE + 0x18))
#define GPIOE_ODR (*(volatile uint32_t *)(GPIOE_BASE + 0x14))
#define GPIO_MODE_AF (2)
/* SDIO */
#define SDIO_BASE (0x40012C00)
#define SDIO_POWER (*(volatile uint32_t *)((SDIO_BASE) + 0x00))
#define SDIO_CLKCR (*(volatile uint32_t *)((SDIO_BASE) + 0x04))
#define SDIO_ARG (*(volatile uint32_t *)((SDIO_BASE) + 0x08))
#define SDIO_CMD (*(volatile uint32_t *)((SDIO_BASE) + 0x0C))
#define SDIO_RESPCMD (*(volatile uint32_t *)((SDIO_BASE) + 0x10))
#define SDIO_RESP1 (*(volatile uint32_t *)((SDIO_BASE) + 0x14))
#define SDIO_RESP2 (*(volatile uint32_t *)((SDIO_BASE) + 0x18))
#define SDIO_RESP3 (*(volatile uint32_t *)((SDIO_BASE) + 0x1C))
#define SDIO_RESP4 (*(volatile uint32_t *)((SDIO_BASE) + 0x20))
#define SDIO_DTIMER (*(volatile uint32_t *)((SDIO_BASE) + 0x24))
#define SDIO_DLEN (*(volatile uint32_t *)((SDIO_BASE) + 0x28))
#define SDIO_DCTRL (*(volatile uint32_t *)((SDIO_BASE) + 0x2C))
#define SDIO_DCOUNT (*(volatile uint32_t *)((SDIO_BASE) + 0x30))
#define SDIO_STA (*(volatile uint32_t *)((SDIO_BASE) + 0x34))
#define SDIO_ICR (*(volatile uint32_t *)((SDIO_BASE) + 0x38))
#define SDIO_MASK (*(volatile uint32_t *)((SDIO_BASE) + 0x3C))
#define SDIO_FIFOCNT (*(volatile uint32_t *)((SDIO_BASE) + 0x48))
#define SDIO_FIFO (*(volatile uint32_t *)((SDIO_BASE) + 0x80))
#define SDIO_POWER_PWRCTRL_SHIFT 0
#define SDIO_POWER_PWRCTRL_PWROFF (0x0 << SDIO_POWER_PWRCTRL_SHIFT)
#define SDIO_POWER_PWRCTRL_RSVPWRUP (0x2 << SDIO_POWER_PWRCTRL_SHIFT)
#define SDIO_POWER_PWRCTRL_PWRON (0x3 << SDIO_POWER_PWRCTRL_SHIFT)
#define SDIO_CLKCR_HWFC_EN (1 << 14)
#define SDIO_CLKCR_NEGEDGE (1 << 13)
#define SDIO_CLKCR_WIDBUS_SHIFT 11
#define SDIO_CLKCR_WIDBUS_1 (0x0 << SDIO_CLKCR_WIDBUS_SHIFT)
#define SDIO_CLKCR_WIDBUS_4 (0x1 << SDIO_CLKCR_WIDBUS_SHIFT)
#define SDIO_CLKCR_WIDBUS_8 (0x2 << SDIO_CLKCR_WIDBUS_SHIFT)
#define SDIO_CLKCR_BYPASS (1 << 10)
#define SDIO_CLKCR_PWRSAV (1 << 9)
#define SDIO_CLKCR_CLKEN (1 << 8)
#define SDIO_CLKCR_CLKDIV_SHIFT 0
#define SDIO_CLKCR_CLKDIV_MSK (0xFF << SDIO_CLKCR_CLKDIV_SHIFT)
#define SDIO_CMD_ATACMD (1 << 14)
#define SDIO_CMD_NIEN (1 << 13)
#define SDIO_CMD_ENCMDCOMPL (1 << 12)
#define SDIO_CMD_SDIOSUSPEND (1 << 11)
#define SDIO_CMD_CPSMEN (1 << 10)
#define SDIO_CMD_WAITPEND (1 << 9)
#define SDIO_CMD_WAITINT (1 << 8)
#define SDIO_CMD_WAITRESP_SHIFT 6
#define SDIO_CMD_WAITRESP_NO_0 (0x0 << SDIO_CMD_WAITRESP_SHIFT)
#define SDIO_CMD_WAITRESP_SHORT (0x1 << SDIO_CMD_WAITRESP_SHIFT)
#define SDIO_CMD_WAITRESP_NO_2 (0x2 << SDIO_CMD_WAITRESP_SHIFT)
#define SDIO_CMD_WAITRESP_LONG (0x3 << SDIO_CMD_WAITRESP_SHIFT)
#define SDIO_CMD_CMDINDEX_SHIFT 0
#define SDIO_CMD_CMDINDEX_MSK (0x3F << SDIO_CMD_CMDINDEX_SHIFT)
#define SDIO_RESPCMD_SHIFT 0
#define SDIO_RESPCMD_MSK (0x3F << SDIO_RESPCMD_SHIFT)
#define SDIO_DCTRL_SDIOEN (1 << 11)
#define SDIO_DCTRL_RWMOD (1 << 10)
#define SDIO_DCTRL_RWSTOP (1 << 9)
#define SDIO_DCTRL_RWSTART (1 << 8)
#define SDIO_DCTRL_DBLOCKSIZE_SHIFT 4
#define SDIO_DCTRL_DBLOCKSIZE_0 (0x0 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_1 (0x1 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_2 (0x2 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_3 (0x3 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_4 (0x4 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_5 (0x5 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_6 (0x6 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_7 (0x7 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_8 (0x8 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_9 (0x9 << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_10 (0xA << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_11 (0xB << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_12 (0xC << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_13 (0xD << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DBLOCKSIZE_14 (0xE << SDIO_DCTRL_DBLOCKSIZE_SHIFT)
#define SDIO_DCTRL_DMAEN (1 << 3)
#define SDIO_DCTRL_DTMODE (1 << 2)
#define SDIO_DCTRL_DTDIR (1 << 1)
#define SDIO_DCTRL_DTEN (1 << 0)
#define SDIO_STA_CEATAEND (1 << 23)
#define SDIO_STA_SDIOIT (1 << 22)
#define SDIO_STA_RXDAVL (1 << 21)
#define SDIO_STA_TXDAVL (1 << 20)
#define SDIO_STA_RXFIFOE (1 << 19)
#define SDIO_STA_TXFIFOE (1 << 18)
#define SDIO_STA_RXFIFOF (1 << 17)
#define SDIO_STA_TXFIFOF (1 << 16)
#define SDIO_STA_RXFIFOHF (1 << 15)
#define SDIO_STA_TXFIFOHE (1 << 14)
#define SDIO_STA_RXACT (1 << 13)
#define SDIO_STA_TXACT (1 << 12)
#define SDIO_STA_CMDACT (1 << 11)
#define SDIO_STA_DBCKEND (1 << 10)
#define SDIO_STA_STBITERR (1 << 9)
#define SDIO_STA_DATAEND (1 << 8)
#define SDIO_STA_CMDSENT (1 << 7)
#define SDIO_STA_CMDREND (1 << 6)
#define SDIO_STA_RXOVERR (1 << 5)
#define SDIO_STA_TXUNDERR (1 << 4)
#define SDIO_STA_DTIMEOUT (1 << 3)
#define SDIO_STA_CTIMEOUT (1 << 2)
#define SDIO_STA_DCRCFAIL (1 << 1)
#define SDIO_STA_CCRCFAIL (1 << 0)
#define SDIO_ICR_CEATAENDC (1 << 23)
#define SDIO_ICR_SDIOITC (1 << 22)
#define SDIO_ICR_DBCKENDC (1 << 10)
#define SDIO_ICR_STBITERRC (1 << 9)
#define SDIO_ICR_DATAENDC (1 << 8)
#define SDIO_ICR_CMDSENTC (1 << 7)
#define SDIO_ICR_CMDRENDC (1 << 6)
#define SDIO_ICR_RXOVERRC (1 << 5)
#define SDIO_ICR_TXUNDERRC (1 << 4)
#define SDIO_ICR_DTIMEOUTC (1 << 3)
#define SDIO_ICR_CTIMEOUTC (1 << 2)
#define SDIO_ICR_DCRCFAILC (1 << 1)
#define SDIO_ICR_CCRCFAILC (1 << 0)
#define SDIO_MASK_CEATAENDIE (1 << 23)
#define SDIO_MASK_SDIOITIE (1 << 22)
#define SDIO_MASK_RXDAVLIE (1 << 21)
#define SDIO_MASK_TXDAVLIE (1 << 20)
#define SDIO_MASK_RXFIFOEIE (1 << 19)
#define SDIO_MASK_TXFIFOEIE (1 << 18)
#define SDIO_MASK_RXFIFOFIE (1 << 17)
#define SDIO_MASK_TXFIFOFIE (1 << 16)
#define SDIO_MASK_RXFIFOHFIE (1 << 15)
#define SDIO_MASK_TXFIFOHEIE (1 << 14)
#define SDIO_MASK_RXACTIE (1 << 13)
#define SDIO_MASK_TXACTIE (1 << 12)
#define SDIO_MASK_CMDACTIE (1 << 11)
#define SDIO_MASK_DBCKENDIE (1 << 10)
#define SDIO_MASK_STBITERRIE (1 << 9)
#define SDIO_MASK_DATAENDIE (1 << 8)
#define SDIO_MASK_CMDSENTIE (1 << 7)
#define SDIO_MASK_CMDRENDIE (1 << 6)
#define SDIO_MASK_RXOVERRIE (1 << 5)
#define SDIO_MASK_TXUNDERRIE (1 << 4)
#define SDIO_MASK_DTIMEOUTIE (1 << 3)
#define SDIO_MASK_CTIMEOUTIE (1 << 2)
#define SDIO_MASK_DCRCFAILIE (1 << 1)
#define SDIO_MASK_CCRCFAILIE (1 << 0)
/* Timers */
#define TIM2_BASE (0x40000000)
#define TIM2_CR1 (*(volatile uint32_t *)(TIM2_BASE + 0x00))
#define TIM2_DIER (*(volatile uint32_t *)(TIM2_BASE + 0x0c))
#define TIM2_SR (*(volatile uint32_t *)(TIM2_BASE + 0x10))
#define TIM2_CNT (*(volatile uint32_t *)(TIM2_BASE + 0x24))
#define TIM2_PSC (*(volatile uint32_t *)(TIM2_BASE + 0x28))
#define TIM2_ARR (*(volatile uint32_t *)(TIM2_BASE + 0x2c))
#define TIM4_BASE (0x40000800)
#define TIM4_CR1 (*(volatile uint32_t *)(TIM4_BASE + 0x00))
#define TIM4_DIER (*(volatile uint32_t *)(TIM4_BASE + 0x0c))
#define TIM4_SR (*(volatile uint32_t *)(TIM4_BASE + 0x10))
#define TIM4_CCMR1 (*(volatile uint32_t *)(TIM4_BASE + 0x18))
#define TIM4_CCMR2 (*(volatile uint32_t *)(TIM4_BASE + 0x1c))
#define TIM4_CCER (*(volatile uint32_t *)(TIM4_BASE + 0x20))
#define TIM4_PSC (*(volatile uint32_t *)(TIM4_BASE + 0x28))
#define TIM4_ARR (*(volatile uint32_t *)(TIM4_BASE + 0x2c))
#define TIM4_CCR4 (*(volatile uint32_t *)(TIM4_BASE + 0x40))
#define TIM_DIER_UIE (1 << 0)
#define TIM_SR_UIF (1 << 0)
#define TIM_CR1_CLOCK_ENABLE (1 << 0)
#define TIM_CR1_UPD_RS (1 << 2)
#define TIM_CR1_ARPE (1 << 7)
#define TIM_CCER_CC4_ENABLE (1 << 12)
#define TIM_CCMR1_OC1M_PWM1 (0x06 << 4)
#define TIM_CCMR2_OC4M_PWM1 (0x06 << 12)
#define AHB1_CLOCK_ER (*(volatile uint32_t *)(0x40023830))
#define GPIOD_AHB1_CLOCK_ER (1 << 3)
#define GPIOD_BASE 0x40020c00
#define GPIOD_MODE (*(volatile uint32_t *)(GPIOD_BASE + 0x00))
#define GPIOD_OTYPE (*(volatile uint32_t *)(GPIOD_BASE + 0x04))
#define GPIOD_PUPD (*(volatile uint32_t *)(GPIOD_BASE + 0x0c))
#define GPIOD_ODR (*(volatile uint32_t *)(GPIOD_BASE + 0x14))
/* ADC */
#define ADC1_BASE (0x40012000)
#define ADC_COM_BASE (0x40012300)
#define ADC_COM_CCR (*(volatile uint32_t *)(ADC_COM_BASE + 0x04))
#define ADC1_SR (*(volatile uint32_t *)(ADC1_BASE + 0x00))
#define ADC1_CR1 (*(volatile uint32_t *)(ADC1_BASE + 0x04))
#define ADC1_CR2 (*(volatile uint32_t *)(ADC1_BASE + 0x08))
#define ADC1_SMPR1 (*(volatile uint32_t *)(ADC1_BASE + 0x0c))
#define ADC1_SMPR2 (*(volatile uint32_t *)(ADC1_BASE + 0x10))
#define ADC1_SQR3 (*(volatile uint32_t *)(ADC1_BASE + 0x34))
#define ADC1_DR (*(volatile uint32_t *)(ADC1_BASE + 0x4c))
#define ADC_CR1_SCAN (1 << 8)
#define ADC_CR2_EN (1 << 0)
#define ADC_CR2_CONT (1 << 1)
#define ADC_CR2_SWSTART (1 << 30)
#define ADC_SR_EOC (1 << 1)
#define ADC_SMPR_SMP_480CYC (0x7)
/* Reboot */
#define AIRCR *(volatile uint32_t *)(0xE000ED0C)
#define AIRCR_VKEY (0x05FA << 16)
# define AIRCR_SYSRESETREQ (1 << 2)
static inline void reboot(void)
{
AIRCR = AIRCR_SYSRESETREQ | AIRCR_VKEY;
}
#endif