46 lines
1.4 KiB
Makefile
46 lines
1.4 KiB
Makefile
UF2_FAMILY_ID = 0x68ed2b88
|
|
DEPS_SUBMODULES += hw/mcu/microchip
|
|
|
|
include $(TOP)/$(BOARD_PATH)/board.mk
|
|
|
|
CFLAGS += \
|
|
-flto \
|
|
-mthumb \
|
|
-mabi=aapcs \
|
|
-mcpu=cortex-m0plus \
|
|
-nostdlib -nostartfiles \
|
|
-DCONF_DFLL_OVERWRITE_CALIBRATION=0 \
|
|
-DCFG_TUSB_MCU=OPT_MCU_SAMD21
|
|
|
|
SRC_C += \
|
|
src/portable/microchip/samd/dcd_samd.c \
|
|
hw/mcu/microchip/samd21/gcc/gcc/startup_samd21.c \
|
|
hw/mcu/microchip/samd21/gcc/system_samd21.c \
|
|
hw/mcu/microchip/samd21/hpl/gclk/hpl_gclk.c \
|
|
hw/mcu/microchip/samd21/hpl/pm/hpl_pm.c \
|
|
hw/mcu/microchip/samd21/hpl/sysctrl/hpl_sysctrl.c \
|
|
hw/mcu/microchip/samd21/hal/src/hal_atomic.c
|
|
|
|
INC += \
|
|
$(TOP)/$(BOARD_PATH) \
|
|
$(TOP)/hw/mcu/microchip/samd21/ \
|
|
$(TOP)/hw/mcu/microchip/samd21/config \
|
|
$(TOP)/hw/mcu/microchip/samd21/include \
|
|
$(TOP)/hw/mcu/microchip/samd21/hal/include \
|
|
$(TOP)/hw/mcu/microchip/samd21/hal/utils/include \
|
|
$(TOP)/hw/mcu/microchip/samd21/hpl/pm/ \
|
|
$(TOP)/hw/mcu/microchip/samd21/hpl/port \
|
|
$(TOP)/hw/mcu/microchip/samd21/hri \
|
|
$(TOP)/hw/mcu/microchip/samd21/CMSIS/Include
|
|
|
|
# For freeRTOS port source
|
|
FREERTOS_PORT = ARM_CM0
|
|
|
|
# flash using bossac at least version 1.8
|
|
# can be found in arduino15/packages/arduino/tools/bossac/
|
|
# Add it to your PATH or change BOSSAC variable to match your installation
|
|
BOSSAC = bossac
|
|
|
|
flash-bossac: $(BUILD)/$(PROJECT).bin
|
|
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
|
$(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R
|