add .env

.env

@@ -0,0 +1,348 @@
+#all the lines that have been touched have a:
+# "#EDITED:"
+#before
+
+#the fields you NEED to change are filled with "CHANGEME"
+
+
+# Security
+#
+# Set these to strong passwords to avoid intruders from impersonating a service account
+# The service(s) won't start unless these are specified
+# Running ./gen-passwords.sh will update .env with strong passwords
+# You may skip the Jigasi and Jibri passwords if you are not using those
+# DO NOT reuse passwords
+#
+
+# XMPP component password for Jicofo
+#EDITED:
+JICOFO_COMPONENT_SECRET=CHANGEME
+
+# XMPP password for Jicofo client connections
+#EDITED:
+JICOFO_AUTH_PASSWORD=CHANGEME
+
+# XMPP password for JVB client connections
+#EDITED:
+JVB_AUTH_PASSWORD=CHANGEME
+
+# XMPP password for Jigasi MUC client connections
+#EDITED:
+JIGASI_XMPP_PASSWORD=CHANGEME
+
+# XMPP recorder password for Jibri client connections
+#EDITED:
+JIBRI_RECORDER_PASSWORD=CHANGEME
+
+# XMPP password for Jibri client connections
+#EDITED:
+JIBRI_XMPP_PASSWORD=CHANGEME
+
+
+#
+# Basic configuration options
+#
+
+# Directory where all configuration will be stored
+CONFIG=~/.jitsi-meet-cfg
+
+# Exposed HTTP port
+#EDITED:
+HTTP_PORT=80
+
+# Exposed HTTPS port
+#EDITED:
+HTTPS_PORT=443
+
+# System time zone
+#EDITED:
+TZ=Europe/Rome
+
+# Public URL for the web service
+#EDITED:
+PUBLIC_URL=https://CHANGEME
+
+# IP address of the Docker host
+# See the "Running behind NAT or on a LAN environment" section in the README
+#EDITED:
+DOCKER_HOST_ADDRESS=CHANGEME
+
+
+#
+# Let's Encrypt configuration
+#
+
+# Enable Let's Encrypt certificate generation
+#EDITED:
+ENABLE_LETSENCRYPT=1
+
+# Domain for which to generate the certificate
+#EDITED:
+LETSENCRYPT_DOMAIN=CHANGEME
+
+# E-Mail for receiving important account notifications (mandatory)
+#EDITED:
+LETSENCRYPT_EMAIL=CHANGEME
+
+
+#
+# Etherpad integration (for document sharing)
+#
+
+# Set etherpad-lite URL (uncomment to enable)
+#ETHERPAD_URL_BASE=http://etherpad.meet.jitsi:9001
+
+
+#
+# Basic Jigasi configuration options (needed for SIP gateway support)
+#
+
+# SIP URI for incoming / outgoing calls
+#JIGASI_SIP_URI=test@sip2sip.info
+
+# Password for the specified SIP account as a clear text
+#JIGASI_SIP_PASSWORD=passw0rd
+
+# SIP server (use the SIP account domain if in doubt)
+#JIGASI_SIP_SERVER=sip2sip.info
+
+# SIP server port
+#JIGASI_SIP_PORT=5060
+
+# SIP server transport
+#JIGASI_SIP_TRANSPORT=UDP
+
+#
+# Authentication configuration (see README for details)
+#
+
+
+#Followed this guide to allow only a registered user to start a room: https://github.com/jitsi/docker-jitsi-meet#authentication
+#the guests will be able to access the room once the organizer joined
+
+# Enable authentication
+#EDITED:
+ENABLE_AUTH=1
+
+# Enable guest access
+#EDITED:
+ENABLE_GUESTS=1
+
+# Select authentication type: internal, jwt or ldap
+#EDITED:
+AUTH_TYPE=internal
+
+# JWT authentication
+#
+
+# Application identifier
+#JWT_APP_ID=my_jitsi_app_id
+
+# Application secret known only to your token
+#JWT_APP_SECRET=my_jitsi_app_secret
+
+# (Optional) Set asap_accepted_issuers as a comma separated list
+#JWT_ACCEPTED_ISSUERS=my_web_client,my_app_client
+
+# (Optional) Set asap_accepted_audiences as a comma separated list
+#JWT_ACCEPTED_AUDIENCES=my_server1,my_server2
+
+
+# LDAP authentication (for more information see the Cyrus SASL saslauthd.conf man page)
+#
+
+# LDAP url for connection
+#LDAP_URL=ldaps://ldap.domain.com/
+
+# LDAP base DN. Can be empty
+#LDAP_BASE=DC=example,DC=domain,DC=com
+
+# LDAP user DN. Do not specify this parameter for the anonymous bind
+#LDAP_BINDDN=CN=binduser,OU=users,DC=example,DC=domain,DC=com
+
+# LDAP user password. Do not specify this parameter for the anonymous bind
+#LDAP_BINDPW=LdapUserPassw0rd
+
+# LDAP filter. Tokens example:
+# %1-9 - if the input key is user@mail.domain.com, then %1 is com, %2 is domain and %3 is mail
+# %s - %s is replaced by the complete service string
+# %r - %r is replaced by the complete realm string
+#LDAP_FILTER=(sAMAccountName=%u)
+
+# LDAP authentication method
+#LDAP_AUTH_METHOD=bind
+
+# LDAP version
+#LDAP_VERSION=3
+
+# LDAP TLS using
+#LDAP_USE_TLS=1
+
+# List of SSL/TLS ciphers to allow
+#LDAP_TLS_CIPHERS=SECURE256:SECURE128:!AES-128-CBC:!ARCFOUR-128:!CAMELLIA-128-CBC:!3DES-CBC:!CAMELLIA-128-CBC
+
+# Require and verify server certificate
+#LDAP_TLS_CHECK_PEER=1
+
+# Path to CA cert file. Used when server sertificate verify is enabled
+#LDAP_TLS_CACERT_FILE=/etc/ssl/certs/ca-certificates.crt
+
+# Path to CA certs directory. Used when server sertificate verify is enabled
+#LDAP_TLS_CACERT_DIR=/etc/ssl/certs
+
+# Wether to use starttls, implies LDAPv3 and requires ldap:// instead of ldaps://
+# LDAP_START_TLS=1
+
+
+#
+# Advanced configuration options (you generally don't need to change these)
+#
+
+# Internal XMPP domain
+XMPP_DOMAIN=meet.jitsi
+
+# Internal XMPP server
+XMPP_SERVER=xmpp.meet.jitsi
+
+# Internal XMPP server URL
+XMPP_BOSH_URL_BASE=http://xmpp.meet.jitsi:5280
+
+# Internal XMPP domain for authenticated services
+XMPP_AUTH_DOMAIN=auth.meet.jitsi
+
+# XMPP domain for the MUC
+XMPP_MUC_DOMAIN=muc.meet.jitsi
+
+# XMPP domain for the internal MUC used for jibri, jigasi and jvb pools
+XMPP_INTERNAL_MUC_DOMAIN=internal-muc.meet.jitsi
+
+# XMPP domain for unauthenticated users
+XMPP_GUEST_DOMAIN=guest.meet.jitsi
+
+# Custom Prosody modules for XMPP_DOMAIN (comma separated)
+XMPP_MODULES=
+
+# Custom Prosody modules for MUC component (comma separated)
+XMPP_MUC_MODULES=
+
+# Custom Prosody modules for internal MUC component (comma separated)
+XMPP_INTERNAL_MUC_MODULES=
+
+# MUC for the JVB pool
+JVB_BREWERY_MUC=jvbbrewery
+
+# XMPP user for JVB client connections
+JVB_AUTH_USER=jvb
+
+# STUN servers used to discover the server's public IP
+JVB_STUN_SERVERS=meet-jit-si-turnrelay.jitsi.net:443
+
+# Media port for the Jitsi Videobridge
+JVB_PORT=10000
+
+# TCP Fallback for Jitsi Videobridge for when UDP isn't available
+JVB_TCP_HARVESTER_DISABLED=true
+JVB_TCP_PORT=4443
+
+# A comma separated list of APIs to enable when the JVB is started [default: none]
+# See https://github.com/jitsi/jitsi-videobridge/blob/master/doc/rest.md for more information
+#JVB_ENABLE_APIS=rest,colibri
+
+# XMPP user for Jicofo client connections.
+# NOTE: this option doesn't currently work due to a bug
+JICOFO_AUTH_USER=focus
+
+# Base URL of Jicofo's reservation REST API
+#JICOFO_RESERVATION_REST_BASE_URL=http://reservation.example.com
+
+# XMPP user for Jigasi MUC client connections
+JIGASI_XMPP_USER=jigasi
+
+# MUC name for the Jigasi pool
+JIGASI_BREWERY_MUC=jigasibrewery
+
+# Minimum port for media used by Jigasi
+JIGASI_PORT_MIN=20000
+
+# Maximum port for media used by Jigasi
+JIGASI_PORT_MAX=20050
+
+# Enable SDES srtp
+#JIGASI_ENABLE_SDES_SRTP=1
+
+# Keepalive method
+#JIGASI_SIP_KEEP_ALIVE_METHOD=OPTIONS
+
+# Health-check extension
+#JIGASI_HEALTH_CHECK_SIP_URI=keepalive
+
+# Health-check interval
+#JIGASI_HEALTH_CHECK_INTERVAL=300000
+#
+# Enable Jigasi transcription
+#ENABLE_TRANSCRIPTIONS=1
+
+# Jigasi will record audio when transcriber is on [default: false]
+#JIGASI_TRANSCRIBER_RECORD_AUDIO=true
+
+# Jigasi will send transcribed text to the chat when transcriber is on [default: false]
+#JIGASI_TRANSCRIBER_SEND_TXT=true
+
+# Jigasi will post an url to the chat with transcription file [default: false]
+#JIGASI_TRANSCRIBER_ADVERTISE_URL=true
+
+# Credentials for connect to Cloud Google API from Jigasi
+# Please read https://cloud.google.com/text-to-speech/docs/quickstart-protocol
+# section "Before you begin" paragraph 1 to 5
+# Copy the values from the json to the related env vars
+#GC_PROJECT_ID=
+#GC_PRIVATE_KEY_ID=
+#GC_PRIVATE_KEY=
+#GC_CLIENT_EMAIL=
+#GC_CLIENT_ID=
+#GC_CLIENT_CERT_URL=
+
+# Enable recording
+#ENABLE_RECORDING=1
+
+# XMPP domain for the jibri recorder
+XMPP_RECORDER_DOMAIN=recorder.meet.jitsi
+
+# XMPP recorder user for Jibri client connections
+JIBRI_RECORDER_USER=recorder
+
+# Directory for recordings inside Jibri container
+JIBRI_RECORDING_DIR=/config/recordings
+
+# The finalizing script. Will run after recording is complete
+JIBRI_FINALIZE_RECORDING_SCRIPT_PATH=/config/finalize.sh
+
+# XMPP user for Jibri client connections
+JIBRI_XMPP_USER=jibri
+
+# MUC name for the Jibri pool
+JIBRI_BREWERY_MUC=jibribrewery
+
+# MUC connection timeout
+JIBRI_PENDING_TIMEOUT=90
+
+# When jibri gets a request to start a service for a room, the room
+# jid will look like: roomName@optional.prefixes.subdomain.xmpp_domain
+# We'll build the url for the call by transforming that into:
+# https://xmpp_domain/subdomain/roomName
+# So if there are any prefixes in the jid (like jitsi meet, which
+# has its participants join a muc at conference.xmpp_domain) then
+# list that prefix here so it can be stripped out to generate
+# the call url correctly
+JIBRI_STRIP_DOMAIN_JID=muc
+
+# Directory for logs inside Jibri container
+JIBRI_LOGS_DIR=/config/logs
+
+# Disable HTTPS: handle TLS connections outside of this setup
+#DISABLE_HTTPS=1
+
+# Redirect HTTP traffic to HTTPS
+# Necessary for Let's Encrypt, relies on standard HTTPS port (443)
+#EDITED:
+ENABLE_HTTP_REDIRECT=1